PROVISION OF COVERED SHED FOR OFFICERS MARRIED ACCOMMODATION AT NIVEDITA BUILDING NO P 151 AT INHS KALYANI AS AND AS TO FLOORING AND WALL PANELING IN CNC SECRETARIAT BUILDING NO P 45 5 TH FLOOR SPECIAL REPAIRS TO ROOF OF BUILDING NO P22 AT ENC O MESS

Amount

Excavating in post holes (or similar holes) each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface. in hard / dense soil complete all as specified and as directed.,

M & L for Plain Cement Concrete TypeC2 1:3:6 (using 40 mm graded stone aggregate) in foundations,post holes etc., complete all as specified and as directed.

M & L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and as directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for rendering 15mm thick on fair faces of brick work / concrete surfaces external surfaces in cement mortar 1:4 finished fair and even with out using extra cement , including mixing of water proofing compound as per manufacturer's instructions wherever required complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item.

M&L for Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

S & F mild steel work as in tubular trusses, trussed purlins and tubular posts including special shaped washers etc., complete using ERW or induction but welded tubes confirming to IS 1161- 1979 grade St 240 with one shop coat of zinc chromate primer paint at contractor's work shop before fabrication complete all as specified and as directed.

S & F mild steel work with square / rectangular hollow section as in roof truss, purlins, rails etc. complete using ERW or induction but welded tubes confirming to IS 1161- 1979 grade St 240 with one shop coat of zinc chromate primer paint at contractor's work shop before fabrication complete all as specified and as directed.

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment steel of Fe 410-W (Gde E250) quality-B complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc. 5cm long with dia of neck 5 to 10 mm complete all as specified and as directed.

M&L for two coats of synthetic enamal paint over a coat of red oxide zinc chrome primer on new steel surfaces over 10 cm width or girth including preperation of surfaces complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

Supply and Fix Pre-painted galvalume aluminum zinc coating corrugated profile sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH/ JINDAL

Supply and Fix Pre-painted galvalume aluminum zinc coating plain sheet of 0.50 mm thick[TCT] of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. MAKE : M/s TATA BLUE SCOPE, M/s LLOYD INSULATIONS INDIA LTD, M/s BUILD TECH / JINDAL

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 100mm thick Plain Cement Concrete 1:3:6 Type C-2 (using 40mm graded granite stone aggregates) as in subfloors, sub-bases, floors and pavings / hardstanding etc complete all as specified and as directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick, M-35 Grade finished with grey cement and pigmentcomplete all as specified and as directed. Make : Ultra, Eurocon, Duracrete, Mehatab as approved by GE.

M&L for Providing Cement Concrete Type C1 1:3:6 using 20mm graded aggregates in lintels upto 1.5m clear span, cills, steps; sesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25cm thick with soils complete all as specified and as directed.

Removing Excavated soils to a distance exceeding 1.5 KM but not exceeding 5 KM and depositing where directed complete all as specified and as directed.

Supply only Liquid water proofing compound Make : Acco proof / Impermo / Lik proof / Scott No. 1

Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] and removing rubbish to out side MD land complete all as specified and as directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square / rectangular) Double charged, polished, area of each tile exceeding 0.36 Sqm and not exceeding 0.42 sqm, as in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

Material and Labour for Walling of random rubble [ KONDALITE STONE], uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4sqm each with shutters without taking off shutters from frame complete all as specified and as directed.

M & L for Two coat synthetic varnish liquid transperent over a coat of wood filler liquid transparent including preparation to new / old treated surfaces of wood over 10 Cm width or girth. complete all as speicfied and as directed. Make : Sheenlac / Naidu polish / Asian

S&F Powder coated aluminium frames / shutters for door and windows / ventilators and partitions etc., with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

M&L Powder coated aluminium window / ventilator shutters, sliding type, without sash bars, aluminium sections weighing 0.55 kg/m, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary handles / locking arrangements etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F Powder coated aluminium grill, Deco grill" model DG -102 and fixed in channel including necessary fixing arragements etc complete all as specified and as directed

Supply and Fix Sheet glass 5 mm thick ordinary quality and glazing with wooden beading in square exceeding 0.5 sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

M & L for complete removal of existing heritage metallix granules wall finish on external wall surface and applying two coats of texture finish on walls by applying a layer of plaster of paris over a coat of primer and then applying texture of approved design over one coat of putty and upon drying of the texture surface applying two coats of stain paint (weather coat) complete all as specified and directed. (Note:- Rate shall be include for necessary scaffolding and safety measures where required at site)

M & L for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick Solid PVC sheet fillet of width 35mm for Wall Lining Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per SSR part - I specifications and drawing complete all as specified and directed. Make for Item No. 33 and 34: SINTEX / NANDI / Rajshri plastiwood

S&F Aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. Make : Godrej / Everite / Priya

S & F Framed work such as in gates, grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Demolition of ordered portions of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to out side MD land complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls with cement mortar 1:6 complete all as specified and as directed

Supply only integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

M&L for preparing newly plastered surfaces of internal walls and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

M & L for preparation of newly plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer on external walls / ceiling surfaces to obtain smooth finish complete all as specified and as directed. Make : (i) Weather coat paint :Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

Mild steel work as in grills and gratings,framed guard bars, barred iron doors, ladders, railings and with ends of bars shouldered and / or riveted or forged into spikes and similar work confirming to Fe 290 Gde E165 including spikes or flowers or any other ornamental piece works of any number and necessary welding or fixing with screws, PINTLE hinges, Tower bolts and sliding bots etc., complete all as specified and as directed.

S & F 1.25 mm thick Galvanized Iron sheet with grade of coating 450 in wall cladding, steel gates, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and as directed.

M & L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Soft / loose soil complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep & getting out in soft / loose soil and removing rubbish outside MD land, complete all as specified and as directed.

M&L for Reinforced Cement Concrete (Nominal Mix) Type A1 1:11/2:3 (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete (Nominal Mix) Type A1 1:11/2:3 (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

S & F reinforcement using TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L for Mild steel TMT bars 5 to 10 mm dia., and over cut to length, bent to shape required, as in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Use and waste of rough finished flat Form work to sides of concrete foundations, rafts, plinth beams and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces in walls / ceilings in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

S & F Vitrified parking tiles ,Heavy duty ,Coloured ,Premium Quality Size 300x300x10mm thick tiles as in floors ,set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint free to match the of the tiles including scred bed or bedding layer of mortar 15mm thick in Cement mortar 1:4 complete all as specified and directed Note : Tile colour/Shade /Design of tiles shall be approved by GE. Make : Johnson / Nitco / Asian Granito / Varmora

M&L Chequered cement concrete tiles 30cm x 30cm x 23 to 25mm thick, set, jointed and pointed in neat cement slurry as in floors including screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Bharat Tiles & Marble Pvt Ltd / National Tiles & Industries Pvt Ltd / Nitco Tiles Pvt Ltd / Nimco Tiles / Metro Tiles Bombay / Vitco Tiles Bombay / Mehtab Tiles

M&L for Providing Cement Concrete Type B1 1:2:4 using 20mm graded aggregates in lintels upto 1.5m clear span, cills, steps; sesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M & L for broken glass coping on top of wall in Cement Mortar 1: 3 complete all as specified and directed. Note; Broken glass at the rate of minimum 8Kg per Sqm shall be provided.

M&L for 50mm thick precast cement concrete (1:2:4) type B-0, using 12.5mm graded stone aggregates in louvers and jallies, including all mouldings and set in cement mortar (1:4) complete all as specified and as directed. Note: Rate quoted shall be deemed to be included for necesary reinforcement i.e., minimum 6mm dia MS round bars at 75mm centre to centre on both directions.

M&L for preparation of new wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. Make : Super-Snocem / Durocem / Aquacem complete all as specified and directed

S & F Stainless steel railing at Entrance of Ramp and at Stair case area confirming to Grade 304 SG including necessary fixing arrangements, welding etc, complete all as specified and as directed.

S & F Mild steel work as in Ornamental and Intricate design framed and hung gates, including pintle stops and hand made sliding bolts etc and similar work confirming to Fe 290 Grade - E - 165 complete all as specified and as directed.

S & F Collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets, complete all as specified and as directed.

Demolition of Reinforced cement concrete in any description and any position not exceeding 15 cm thickness, (other than ground floor) and seperation of serviceable materials from unserviceable, stacking the serviceable materials within 100 Metres and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.11 Sq. M but not exceeding 0.16 Sq. M, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M & L for 25 mm thick, PCC 1:2:4, Type B0, using (12.5mm graded aggregate) as in sub base / levelling course of flooring complete all as specified and as directed.

S&F PRV (Pressure reduction valve) of Brass including making new joints or connection for union and nipple to the existing 20 mm pipes alongwith errection and dismantling double steel scaffolding with platform at every PRV (Pressure reducing valve) joint upto the height of 10th storey of bldg alongwith setting the required pressure of water at every PRV joint including cost of union and specials as required at site complete all as specified and directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S&F Aluminium frame for doors, windows, ventilators, including shutters, fixed partitions etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make : Jindal / Indal / Hindalco

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.

S&F 7 mm thick aluninium grills of make " Decogrill" model DG 104 fitted in to suitable Aluminium channel and fixed to windows / ventilators complete all as specified and as directed. Make : Jindal / Indal / Hindalco

S&F First class hard wood (TEAK WOOD) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L for cutting holes in brick walls in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 and making good the surface as per existing surface finishing as required complete all as specified and as directed.

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 290, Grade E-165 complete all as specified and as directed.

S & F 35 mm thick, Factory Made First Class Hard Wood (TEAK WOOD), Kiln Seasoned and chemically pressure treated plain framed, panelled shutter [any number of panels] with lock rail and panel of 20 mm thick First Class Hard Wood (TEAK WOOD) complete all as specified and as directed.

S & F Preparing surfaces of wood / steel and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sq. m each,and treated with tar or coal tar black paint complete all as specified and as directed

S & F 100 mm long extruded Butt hinges,[ISI marked] extruded brass, with mild steel hinge pin, bright polished and fixed, type B-21 complete all as specified and as directed.

S & F 150mm Extruded brass handles, fabricated type polished complete all as specified and as directed.

S & F 140mm Floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S & F 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi / Hindustan Pilkington

M & L for Two coat synthetic varnish liquid transperent over a coat of wood filler liquid transparent including preparation to new or un treated surfaces of wood over 10 Cm width or girth. complete all as speicfied and as directed. Make : Sheenlac / Naidu polish / Asian

Preparing old treated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Dismantling of Single Layer Mangalore Pattern with ceiling tiles or slate roofing or similar tiles in roofing complete all as specified and as directed.

Dismantling of Battens for Tiles, Shingles etc of any size including tilting fillets spaced at more than 15 cm complete all as specified and as directed.

S & F Prepainted Galvalume Aluminium Zinc Coating GI based Corrugated (Mangalore pattern) Steel Sheet 0.5mm thick of any having tensile strength not less than 340 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F Structural steel (MS) angles, bars, flats / round / square / box type sections etc., as in supports / clamps and similar small articles conforming to Fe 410-W Grade E-250 complete all as specified and as directed.

M & L for preparing the old plastered surfaces of walls/ ceilings and applying one coat of weather proof Acrylic Exterior emulsion paint of approved make and shade complete all as specified and as directed. Make : (i) Weather coat paint :Apex ULTIMA from Asian Paints / All Guard from Berger / Weather Shield Max Exterior Acrylic from ICI Dulux

preparing the old plastered surfaces of walls/ ceilings and applying putty one or more coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Preparing old treated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

Preparing old treated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

Preparing old treated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

P SRINIVASA RAO

K K INFRA

K SATYANARAYANA ENTERPRISES