SPECIAL REPAIRS TO BLDG NO T-07 AND T-08 OF AVN UNIT UNDER GE MISSAMARI

Amount

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling existing old unserviceable AC sheet of any description complete all as specified and directed..

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to confirming to Fe-410 (Gde E- 250) including necessary prepration of new surface and applying a coat of red oxide zinc chrome primer and applying 2 coats of synthetic enamel paint dismantling existing unserviceable mild steel work of any description complete all as specified and directed

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, including necessary prepration of new surface and applying a coat of red oxide zinc chrome primer and applying 2 coats of synthetic enamel paint complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300x 200x 7 mm thick set and pointed in white or cloured cement to match laid over and including screed bed/backing coat 10 mm thick in cement mortar 1:4 including existing unserviceable wall tiling & removing debris off the premises, complete all as specified and directed. .

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer 15mm thick of cement mortar 1:6, 15 mm thick for laying floor finishes dismantling existing unserviceable floor tiling & removing debris off the premises,complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer 15mm thick of cement mortar 1:6, for laying floor finishes dismantling existing unserviceable floor tiling & removing debris off the premises,complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified.

M&L for 75 mm thick cement concrete typec C-2 (1:3:6) using 40 mm graded stone aggregate as in path/hardstanding finished even and fair without using extra cement complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.

M&L for brick work with sub class B bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius, complete all as specified and directed.

M&L for brick work with sub class B bricks built in cement mortar 1:4 straight or curved on plan to any radius in half brick thick walls, complete all as specified and directed..

M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth, without using extra cement, complete all as specified and directed..

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc,complete all as specified and directed..

M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) to wall surface and the surface is finished even and smooth without using extra cement,complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames),complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame)

S & F Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed..

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides,complete all as specified and directed..

S&F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc,complete all as specified and directed..

Supply for anodised aluminium three track sliding window and ventilator frame side/top/shutters (weight of section not less that 0.55 Kg/RM) aluminium section without sash bar aluminium section including all necessary joining cleats,hold fast, rubber gasket anodised snap beading, anodised aluminium fittings, suitable alum handle and locking arrangement etc, two track for glass and one track for aluminium wire mess etc, including powder coated of any colour (thick of power coating not less than 50 micron) & providing AC hole complete all as specified and directed.. Note:- (i) Wire cloth /glass shall be measured and paid separately at SUPPLY only rates under appropiate items. (ii) Labour charges for fixing of wire cloth/glass panes is demeed to be included in unit the unit rate quoted.

Supply only 4 mm thick sheet glass, ordinary quality and and glazing with aluminiup beads in squares not exceeding 0.50 Sqm in each pane,complete all as specified and directed.

Supply only aluminium wire cloth with 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium stapple complete all as specified and directed.

Supply and fixed stainless steel wire cloth with 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed withstainless steel wire stapple complete all as specified and directed.

S&F 20mm thick 2nd class Hardwood Boarding, fixed with screws clean sawn with butt joints in any situation inlcuding dismantling existing unserviceable boarding ,complete all as specified and directed.

S&F 2nd class hardwood Timber fixed in clean sawn in scantlings including dismantling existing unserviceable timber scantlings 40 Sqcm and over in any section, in any position ,complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification complete all as specified and directed..

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges,complete all as specified and directed.

S & F 75 mm long medium weight, cold rolled mild steel Butt hinges,complete all as specified and directed.

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised,complete all as specified and directed.

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised,complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section,complete all as specified and directed.

S&F aluminium alloy 300mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed,complete all as specified and directed.

Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender with and including 4mm thick non Asbestos designer Cement E board fixed/inserted in snap grid ceiling and painting with 2 coats of acrylic distemper as approved including dismantling of existing unserviceable ceiling of any description complete all as specified and directed.

S&F in repairs 10 Ltrs. Capacity PVC flusing cistern low level white, with inlet ball valve float, handle, flush pipe etc with all ,complete all as specified and directed.

S&F in repairs Vitreous China squatting pan "Orissa" patern size 630x450mm white with integral foot rest , including S or P traps (Excluding flushing cistern & flush pipe),complete all as specified and directed.

Supply & Fix in repairs Wash down water closet (Pedestal pattern), white Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device mm white with complete all as specified.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand,complete all as specified and directed..

S&F PVC connection pipe 15 mm bore 450 mm long,complete all as specified and directed.

S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges,complete all as specified and directed..

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of existing unserviceable pipe,complete all as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls including dismantling of existing unserviceable pipe,complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius,complete all as specified and directed..

S & F 75 mm bore PVC (SWR) bends of any radius,complete all as specified and directed..

S & F 110 mm bore PVC (SWR) Vent Cowl,complete all as specified and directed.

Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F 15mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor including dismantling of exisitng unserviceable GI pipe & fittings ,complete all as specified and directed.

S&F 20mm bore GI tubing medium graded with all fitting and fixed complete to wall and ceiling or laid in floor including dismantling of exisitng unserviceable GI pipe & fittings ,complete all as specified and directed.

S & F in repairs 15mm bore angular/ concealed stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions,complete all as specified and directed..

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule,complete all as specified and directed.

S&F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed,complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union,complete all as specified and directed.

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismantling of existing unserviceable tank, complete screwed for iron pipe or brass ferrule and fixed,complete all as specified and directed.

S&F 20 mm dia ball valves, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms) complete, screwed for iron pipes or brasas ferrule and fixed,complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed..

M&L Preparation of new or previously untreated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint over one coat of pink primer,complete all as specified and directed..

M&L Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint,complete all as specified and directed.

M&L Preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint,complete all as specified and directed.

M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat of chalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty,complete all as specified and directed.

M&L for Complete removal of old surface for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty,complete all as specified and directed.

Taking down carefully existing unserviceable copper/ aluminium point wiring (light,call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators,bracket light fittings and making good to the disturbed surface ccomplete all as specified and directed.

Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.

Taking down carefully unserviceable aluminium submain wiring of any type /location including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes, complete all as specified and directed..

Taking out unserviceable UG Cable any cross sectional area and connection from any position, complete all as specified and directed..

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping medium grade of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light/Fan/Bell Point controlled by One 1-Way Switch 5 Amp, duly fixed with copper lugs and flexible pipe from ceiling rose to fitting/fixtures complete all as specified and as directed.

Description all as per item No 70 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed..

Description all as per item No. 70 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed. .

Description all as per item No 70 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant Low smoke (FRLSH) PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed..

S & F Switch piano (White) flush type single pole one way 5 Amp, 230 Volts complete all as specified.

S & F Socket outlet (White) 2 in 1, 5 pin, 5 Amps complete all as specified and directed.

S & F Switch socket combination(White) flush type multipurpose 5 pin 5 Amps two in one , 230 volts complete all as specified

S&F Switch socket combination (White) 2 in 1 5/6 pin, 15 Amp flush type universal complete all as specified and directed..

S&F ceilling rose (White) three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified

S & F ceiling fan regulator (White) step type, 2 Module, flush type heavy duty suitable to work on 230 Volt AC supply complete all as specified.

S & F Lamp holder (White) with insulated body, with back plate suitable for batten fittings complete all as directed.

S & F LED bulb 10 watt 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.

S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415, volts double, door with locking system complete all as specified and directed.

S & F MCB FP 415 volts of capacity 63 amps complete all as specified and directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system complete grouted on walls complete all as specified.

S & F sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with locking system complete grouted on walls complete all as specified and directed.

S & F MCB SPN 230 volts of capacity 40 Amps complete all as specified.

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed.

Supply and fixing LED Tube Light Batten fitting 1x 20W, 220V, AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 20 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape duly fixed with Clamps nuts and bolts complete all as directed.

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and errection pipe etc complete all as directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.

Supply & Laying XLPE LT heavy duty UG Cable of size 35 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed.

Supply & Laying XLPE LT heavy duty UG Cable of size 10 Sqmm 2.0 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed.

S & F GI Tubing light grade of size 40mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed.

Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unserviceable core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan duly painted with two coats of synthetic enamel paint complete all as specified and as directed.

M&L concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including 20mm(minimim) medium grade rigid PVC CONDUIT (ISI marked) of suitable size with all fittings and accessories ISI marked including cutting chases for conduits & and making good to walls, floors etc as per existing specifications.complete all as specified & as directed NOTE : (i)Two runs of PVC wire, one run of earth wire & one run of PVC Conduit will be measured as one length. (ii) Loop length as required and as directed deemed to be included in the UNIT RATE QUOTED.

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

M&L earthing with GI earth plate electrode 600x600x6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth wire protected by and including PCC (1:2:4) type B1 precast RCC cover slab (1:2:4) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth wire GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed.

Supply and Fix Cable end termination kit for LT 1.1 KV Cable for Cable 25 to 50 Sqmm 3.5 Core cable complete all as specified and directed .

BEE KAAY TRADERS

A N BUILDERS

MAA CONSTRUCTION

S H ENTERPRISES