Construction of MP hall in JNV at Rampur (Uttar Pradesh)

NAME OF WORK :- Construction of MP Hall at JNV, Rampur (UP)

Sl. Estimated cost (in Rs)

Details of work

No. DSR-2021 DSR-2022 N.S

1 Main Building-MP Hall

3 Electrical Work 12,36,979.24 8,14,925.66

4 Fire Fightining work 6,46,898.08 2,72,329.00

6 Sound System 12,00,000.00

A GRAND TOTAL 3,48,26,547.41

A GRAND TOTAL 3,48,26,547.41

2 Development Work

1 Pathway 3,54,520.42

2 Internal CC Road 6,56,395.51

3 External water supply 33,222.36 40,000.00

4 Drainage System 2,41,322.23

5 External Sewerage line 3,64,529.48

6 External Electrification

(i) Supply & laying of cable 15,563.65 35,231.06

(ii) External lights 70,537.32

(iii) Earthing & miscellaneous items 67,131.02 16,000.00

GRAND TOTAL 18,94,453.05

GRAND TOTAL 18,94,453.05

Grand Total (A+B) 3,67,21,000.00

Grand Total (A+B) 3,67,21,000.00

Digitally signed by

CHANDRESH KUMAR

BILL OF QUANTITY FOR CIVIL WORKS

[ MULTIPURPOSE HALL]

DSR- DESCRIPTION OF ITEM DSR Rates NS Rates AMOUNT DSR AMOUNT (Rs)

SL NO QUANTITY UNIT

2021 (Rs) (Rs) ITEM(Rs) [M.R. ITEM]

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or drains (not

exceeding 1.5 m in width or 10 sqm on plan), including dressing

1 of sides and ramming of bottoms, lift upto 1.5 m, including

getting out the excavated soil and disposal of surplus excavated

soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm in

2 2.25 depth,consolidating each deposited layer by ramming and 94.760 CUM 262.48 24,872.38

watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sand under floors, including

3 2.27 watering, ramming,consolidating and dressing complete. 201.090 CUM 2233.77 4,49,189.43

Excavating, supplying and filling of local earth (including royalty)

by mechanical transport upto a lead of 5km also including

4 2.25a ramming and watering of the earth in layers not exceeding 20 cm 605.880 CUM 381.03 2,30,858.01

in trenches, plinth, sides of foundation etc. complete.

Anti termite treatment

Supplying chemical emulsion in sealed containers including

delivery as specified.

2.34.1 Chlorpyriphos emulsifiable concentrate of 20% 50.000 Litre 251.59 12,579.70

Diluting and injecting chemical emulsion for POST-

2.35 CONSTRUCTIONAL anti-termite treatment (excluding the cost of

chemical emulsion) :

Along external wall where the apron is not provided using

chemical emulsion @ 7.5 litres / sqm of the vertical surface of the

6 2.35.1.1 substructure to a depth of 300mm including excavation channel 98.032 Metre 33.38 3,272.76

along the wall & rodding etc. complete: With Chlorpyriphos/

Lindane E.C. 20% with 1% concentration

Treatment of soil under existing floors using chemical emulsion @

one litre per hole, 300 mm apart including drilling 12 mm

2.35.3 diameter holes and plugging with cement mortar 1 :2 (1 cement

: 2 Coarse sand) to match the existing floor:

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

B Concrete Work

Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work up

8 4.1.10 to plinth level 1:5:10 (1 Cement : 5 coarse sand (zone-III) 165.020 CUM 6253.83 10,32,007.16

natural sources : 10 graded stone aggregate 40 mm

nominal size derived from natural sources)

Providing and laying damp-proof course 40mm thick with cement

concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from

9 4.10 natural sources : 4 graded stone aggregate 12.5mm nominal size 61.230 SQM 383.30 23,469.65

derived from natural sources)

Extra for providing and mixing water proofing material in cement

10 4.12 concrete work in doses by weight of cement as per 16.000 59.07 945.11

manufacturer's specification.

Providing & applying a coat of residual petroleum bitumen of

grade of VG-10 of approved quality using 1.7kg per square metre

11 4.13 on damp proof course after cleaning the surface with brushes and 61.230 SQM 117.67 7,205.12

finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1

cement : 3 coarse sand (zone-III) derived from natural sources :

12 4.17 aggregate 20 mm nominal size derived from natural sources) 127.940 SQM 704.54 90,138.82

over 75mm thick bed of dry brick ballast 40 mm nominal size,

well rammed and consolidated and grouted with fine

sand,including necessary excavation,levelling & dressing &

finishing the top smooth.

Brick edging in full brick width and half brick depth including

excavation, refilling and disposal of surplus earth lead upto 50

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

C Reinforced Cement Concrete

Centering and shuttering including strutting, propping etc. and

removal of form for all heights :

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

(c) 5.9.5 Lintels, beams, plinth beams, girders, bressumers 1489.503 RM 628.78 9,36,567.30

(d) 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts. 776.079 SQM 831.26 6,45,120.88

Edges of slabs and breaks in floors and walls Under 20 cm wide.

Extra for additional height in centering, shuttering where ever

required with adequate bracing, propping etc., including cost of

de-shuttering and decentering at all levels, over a height of 3.5

15 5.11.1 m, for every additional height of 1 metre or part thereof (Plan 515.160 SQM 329.97 1,69,987.56

area to be measured).

Suspended floors, roofs, landing, beams and balconies (Plan area

to be measured)

CHANDRESH KUMAR

DSR- DESCRIPTION OF ITEM DSR Rates NS Rates AMOUNT DSR AMOUNT (Rs)

SL NO QUANTITY UNIT

2021 (Rs) (Rs) ITEM(Rs) [M.R. ITEM]

Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete

16 5.22.6 upto plinth level. Thermo-Mechanically Treated bars of grade 19195.490 KG 92.66 17,78,662.68

Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete

above plinth level. Thermo-Mechanically Treated bars of grade

Fe-500 D or more.

Add for plaster drip course/ groove in plastered surface or

moulding to R.C.C. projections.

Providing and laying in position ready mixed or site batched

design mix cement concrete for reinforced cement concrete work;

using coarse aggregate and fine aggregate derived from natural

sources, Portland Pozzolana / Ordinary Portland /Portland Slag

cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard

setting of concrete, to improve durability and workability without

19 5.33 impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of

centering, shuttering, finishing and reinforcement as per direction

of the engineer-in-charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to

either re-design the mix

(I) 5.33.1 All works upto plinth level

Concrete of M25 grade with minimum cement content of

Concrete of M30 grade with minimum cement content of

5.33.1.2 (iii) R.C.C. work in Columns 20.710 CUM 9121.71 1,88,910.52

(II) 5.33.2 All works above plinth level upto floor V level

Concrete of M25 grade with minimum cement content of

Concrete of M30 grade with minimum cement content of

D Masonry Work

Half brick masonry with common burnt clay F.P.S. (non modular)

6.13.2 bricks of class designation 7.5 in superstructure above plinth level 171.570 Sqm 1052.24 1,80,532.15

up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S.

bars at every third course of half brick masonry.

Brick work with non modular fly ash bricks conforming to

6.34.2 IS:12894, class designation 10 average compressive strength in 313.620 CUM 7934.07 24,88,283.08

superstructure above plinth level up to floor V level in : Cement

mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of

23 6.1.2 class designation 7.5 in foundation and plinth in: Cement mortar 104.880 CUM 6881.83 7,21,766.75

1:6 (1 cement : 6 coarse sand)

E Cladding Work

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills , facias and similar locations of

required size, approved shade, colour and texture laid over 20

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all

Providing edge moulding to 18mm thick marble stone counters,

Vanities etc. including machine polishing to edge to give high

gloss finish etc. complete as per design approved by Engineer-in-

Extra for fixing marble /granite stone over and above

26 8.4 corresponding basic item, in facia and drops of width upto 150 79.50 RM 491.52 39,075.76

mm with epoxy resin based adhesive including cleaning etc.

Extra for providing opening of required size & shape for wash

basins/ kitchen sink in kitchen platform, vanity counters and

27 8.5 similar location in marble/Granite/stone work including necessary 8.00 EACH 835.29 6,682.30

holes for pillar taps etc. including moulding, rubbing and

polishing of cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by

28 8.31 Engineer-in-Charge, in skirting, risers of steps and dados, over 268.670 SQM 1099.16 2,95,311.49

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of

matching shade complete.

(Size-300x450 )

F Wood and PVC Work

Providing and fixing panelling or panelling and glazing in panelled

panelled and glazed shutters for doors, windows and clerestory

29 9.7 windows (Area of opening for panel inserts excluding portion

inside grooves or rebates to be measured). Panelling for panelled

or panelled and glazed shutters 25 mm to 40 mm thick :

9.7.7 Float glass panes

5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

CHANDRESH KUMAR

DSR- DESCRIPTION OF ITEM DSR Rates NS Rates AMOUNT DSR AMOUNT (Rs)

SL NO QUANTITY UNIT

2021 (Rs) (Rs) ITEM(Rs) [M.R. ITEM]

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door

Frames of cross-section 90 mm x 45 mm having single rebate of

32 mm x 15 mm to receive shutter of 30 mm thickness. The

laminate shall be moulded with fire resistant grade unsaturated

30 9.121 polyester resin and chopped mat. Door frame laminate shall be 76.050 RM 726.19 55,227.00

2mm thick and shall be filled with suitable wooden block in all the

three legs. The frame shall be covered with fiber glass from all

sides. M.S. stay shall be provided at the bottom to steady

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush

doorshutter in different plain and wood finish made with fire

retardant grade unsaturated polyester resin, moulded to 3 mm

thick FRP laminate all around, with suitable wooden blocks inside

at required places for fixing of fittings and polyurethane foam

31 9.122.2 (PUF)/Polystyrene foam to be used as filler material throughout 24.860 SQM 4096.80 1,01,846.47

the hollow panel, casted monolithically with testing parameters of

F.R.P. laminate conforming to table - 3 of IS: 14856, complete as

of Engineer-in-charge.

Providing and fixing factory made uPVC white colour casement/

Casement cum fixed glazed door comprising of uPVC multi-

chambered frame, sash and mullion (where ever required)

extruded profiles duly reinforced with 1.60 ± 0.2 mm thick

galvanized mild steel section made from roll forming process of

required length (shape & size according to uPVC profile), uPVC

extruded glazing beads of appropriate dimension, EPDM gasket,

zinc alloy (white powder coated) 3D hinges and one handle on

each side of panels along with zinc plated mild steel multi point

lockinghaving transmission gear, cylinder with keeps and one

side key, G.I fasteners 100 x 8 mm size for fixing frame to

finished wall and necessary stainless steel screws, etc. Profile of

frame & sash shall be mitred cut and fusion welded at all corners,

32 9.147C mullion (if required) shall be also fusion welded including drilling

of holes for fixing hardware's and drainage of water etc. After

fixing frame the gap between frame and adjacent finished wall

shall be filled with weather proof silicon sealent over backer rod

of required size and of approved quality, all complete as per

approved drawing & direction of Engineer-in-Charge. (Single /

double glass panes and silicon sealent shall be paid separately).

Variation in profile dimension

in higher side shall be accepted but no extra payment on this

account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus

5% tolerance in dimension i.e. in depth & width of profile shall be

Casement door with top hung ventilator with 3D and S.S.

friction hinges (400 x 19 x 1.9 mm) made of (big series)

mm all having wall thickness of 2.3 ±. 0.2 mm and

single glazing bead / double glazing bead of appropriate

dimension.(Area of door upto 2.50 sqm)

Providing and fixing fire resistant door frame of section 50 x 60

mm on horizontal side & 35 x 60 mm on vertical sides having

built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating

not less than 120gm/m²) suitable for mounting 120 min Fire

Rated Glazed Door Shutters. The frame shall be filled with

Mineral wool Insulation having density min 96Kg/m³ . The frame

will have a provision of G.I. Anchor fastners 14 nos ( 5 each on

33 9.161 vertical style & 4 on horizontal style of size M10 x 80 ) suitable 42.60 RM 1851.19 78,860.84

for fixing in the opening along with Factory made Template for SS

Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated

glazed shutter . The frame shall be finished with a approved fire

resistant primer or Powder coating of not less than 30 micron in

desired shade as per the directions of Engineer - in- charge .

(Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door

shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or

tested and certified as per laboratory approved by Engineer-in-

charge, with suitable mounting on door frame, consisting of

vertical styles, top rail & side rail 60 mm x 60 mm wide and

34 9.162 bottom rail of 110 mm x 60mm made out of 1.6mm thick G.I. 30.60 SQM 10062.99 3,07,927.39

sheet (zinc coating not less than120gm/m²) duly filled mineral

wool insulation having density min 96 kg/m³ and fixing with

necessary stainless steel ball bearing hinges of size100x89x3mm

of approved make, including applying a coat of approved fire

resistant primer or powder coating not less than 30 micron etc all

complete as per direction of Engineer-in-charge (panelling to be

paid for seperately).

Providing and fixing glazing in fire resistant door shutters, fixed

panels & partitions etc., with G.I. beading made out of 1.6 mm

thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20

x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm

from the edges and150 mm c/c , including applying a coat of

approved fire resistant primer/powder coating of not less than 30

micron on G.I. beading, & special ceramic tape of 5 x 20 mm size

etc complete in all respect as per NBC 2016, IS 16231 (Part

3):2016 and as per direction of Engineer-incharge with glass of

35 9.164 required thickness having 120 minutes of fire resistance both 2.16 SQM 41338.86 89,291.94

integrity & radiation control (EW120) and minimum 20minutes of

insulation (EI20). The manufacturer have to give test

report/certification of fire glass and the glass should have the

stamp showing the value of E, EW & EI. The glass shall be tested

in approved NABL accredited lab or by any other accreditation

body which operates in accordance with ISO/IEC 17011 and

accredits labs as per ISO/IEC 17025 for testing and calibration

scopes shall be eligible. The maximum glazing size shall not be

more than 1100x2200 mm (w x h) or 2.42 sqm.

Note: Rate of hardware items deemed to be include in above

items. All Hardware required as per approved shop drawing

should pass European certificate "CE" of conformity / UL with

required fire ratings.

Providing and fixing bright /matt finished Stainless Steel handles

36 9.165.1 of approved quality & make with necessary screws etc all 26.000 NOS 103.82 2,699.40

complete. (a) 125 mm.

CHANDRESH KUMAR

DSR- DESCRIPTION OF ITEM DSR Rates NS Rates AMOUNT DSR AMOUNT (Rs)

SL NO QUANTITY UNIT

2021 (Rs) (Rs) ITEM(Rs) [M.R. ITEM]

Providing & fixing Stainless steel (grade SS-304 or higher) sliding

37 M.R. door bolt/aldrop of size 250x16mm on door shutter including all 13.000 NOS 719.00 9,347.00

accessories as per direction of E/I

Providing and fixing Stainless steel (grade SS-304 or higher)

38 tower bolt (barrel type) with necessary screws etc. complete all

work as per direction of E/I

Filling the gap in between aluminium frame & adjacent RCC/

Brick/ Stone work by providing weather silicon sealant over

39 21.8.1 backer rod of approved quality as per architectural drawings and 351.400 RM 88.11 30,962.80

direction of Engineer-in-charge complete.

Upto 5mm depth and 5 mm width

Steel work in built up tubular (round, square or rectangular

hollow tubes etc.) trusses etc., including cutting, hoisting, fixing

40 10.16.1 in position and applying a priming coat of approved steel primer, 2000.00 KG 160.10 3,20,203.08

including welding and bolted with special shaped washers etc.

Hot finished welded type tubes

Designing, Providing, installing and fixing factory finished

design pregalvanized high tensile steel joists manufactured from

41 26.62 G350 Z275 confirming to IS:277-1992, minimum coating of 50.00 KG 146.20 7,309.99

galvanizing 275 gm/sqm, minimum yield stress 35 MPa &

minimum tensile strength of 380 MPa placed 1.23 metre apart to

support the load of slab etc as per the design & directions of

Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

42 10.25.2 approved steel primer using structural steel etc. as required. 865.15 KG 147.08 1,27,244.91

In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-in-charge.

Chequerred precast cement concrete tiles 22 mm thick in

footpath & courtyard, jointed with neat cement slurry mixed with

pigment to match the shade of tiles, including rubbing and

44 11.20.2 cleaning etc. complete, on 20 mm thick bed of cement mortar 96.050 SQM 1198.95 1,15,159.42

1:4 (1 cement: 4 coarse sand). Medium shade pigment using

50% white cement 50%

Marble stone flooring with 18 mm thick marble stone, as per

sample of marble approved by Engineer-in-charge, over 20 mm

11.23 (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with grey cement slurry, including rubbing

and polishing complete with :

52 mm thick cement concrete flooring with concrete hardener

topping, under layer 40 mm thick cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and top layer 12 mm thick cement hardener

consisting of mix 1:2 (1 cement hardener mix : 2 graded stone

46 11.4 aggregate 6 mm nominal size) by volume, hardening compound 731.250 SQM 884.64 6,46,893.82

mixed @ 2 litre per 50 kg of cement or as per manufacturer's

specifications. This includes cost of cement slurry, but excluding

the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar

47 11.6 1:3 (1 cement : 3 coarse sand), finished with a floating coat of

Providing and fixing 1st quality ceramic glazed floor tiles

conforming to IS : 15622 (thickness to be specified by the

manufacturer ) of approved make in all colours, shades except

burgundy, bottle green, black of any size as approved by

48 11.37A Engineer-in-Charge in skirting, risers of steps and dados over 12 110.800 SQM 970.01 1,07,477.64

mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of matching shade

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades, laid on 20mm thick

49 11.41.2 cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey 97.220 SQM 1464.22 1,42,351.58

cement slurry @ 3.3kg/sqm including grouting the joints with

white cement and matching pigments etc., complete. (a) Size of

Tile 600x600 mm

CHANDRESH KUMAR

DSR- DESCRIPTION OF ITEM DSR Rates NS Rates AMOUNT DSR AMOUNT (Rs)

SL NO QUANTITY UNIT

2021 (Rs) (Rs) ITEM(Rs) [M.R. ITEM]

Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on

20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)

50 11.41A jointing with grey cement slurry @3.3 kg/sqm including grouting

the joints with white cement and matching pigments etc. The

tiles must be cut with the zero chipping diamond cutter only.

Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for

placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

Providing and laying Vitrified tiles in different sizes (thickness to

be specified by manufacturer), with water absorption less than

0.08 % and onforming to I.S. 15622, of approved make, in all

51 11.46.2 colours & shade, in skirting, riser of steps, over 12 mm thick bed 13.290 SQM 1515.75 20,144.25

of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with

grey cement slurry @ 3.3kg/sqm including grouting the joint with

white cement & matching pigments etc. complete. Size of Tile

Providing and laying flamed finish Granite stone flooring in

required design and patterns, in linear as well as curvilinear

portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average)

thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid

52 11.55.1 and jointed with cement slurry and pointing with white cement 40.39 SQM 2676.87 1,08,118.73

slurry admixed with pigment of matching shade including

rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge :Flamed finish granite stone

slab Jet Black, Cherry Red, Elite

Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of

the building all complete as per the architectural drawings with

18 mm thick stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed

53 11.56.1 with cement slurry and pointing with white cement slurry 65.07 SQM 4040.06 2,62,886.54

admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge. Polished Granite stone slab colour of

Black, Cherry/Ruby Red or equivalent

Providing and laying C.C. pavement of mix M-25 with ready

mixed concrete from batching plant. The ready mixed concrete

shall be laid and finished with screed board vibrator , vacuum

dewatering process and finally finished by floating, brooming with

wire brush etc. complete as per specifications and directions of

Engineer-incharge.

(The panel shuttering work shall be paid for separately).

(Note:- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/

recoverable separately).

Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed

from M.S. sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and consisting of

angle cleats of size 25 mm wide x 1.6 mm thick with flanges of

27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange

55 of cleat fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to centre, to which the

ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450

mm centre to centre, shall be fixed in a direction perpendicular to

G.I. intermediate channel

with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25mm long dry wall screws

@ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of

size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing

to a flush finish of tapered and square edges of the board with

recommended jointing

compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats

of primer suitable for board, all as per manufacturer's

specification and also including the cost of making openings for

light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but

excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board

12.45.1 conforming to IS: 2095- (Part I) :2011 (Board with BIS 345.62 SQM 1184.43 4,09,367.78

certification marks)

CHANDRESH KUMAR

DSR- DESCRIPTION OF ITEM DSR Rates NS Rates AMOUNT DSR AMOUNT (Rs)

SL NO QUANTITY UNIT

2021 (Rs) (Rs) ITEM(Rs) [M.R. ITEM]

Providing and fixing tiled false ceiling of specified materials of

size 595x595 mm in true horizontal level, suspended on inter

locking metal grid of hot dipped galvanized steel sections (

galvanized @ 120 grams/ sqm, both side inclusive) consisting of

main "T" runner with suitably spaced joints to get required length

and of size 24x38 mm made from 0.30 mm thick (minimum)

sheet, spaced at 1200 mm center to center and cross "T" of size

24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm

long spaced between main "T" at 600 mm center to center to

form a grid of 1200x600 mm and secondary cross "T" of length

600 mm and size 24x25 mm made of 0.30 mm thick (minimum)

sheet to be interlocked at middle of the 1200x600 mm panel to

56 form grids of 600x600 mm and wall angle of size 24x24x0.3 mm

and laying false ceiling tiles of approved texture in the grid

including, required cutting/making, opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc. Main

"T" runners to be suspended from ceiling using GI slotted cleats

of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia

and 50 mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced

at 1200 mm center to center along main T, bottom exposed

width of 24 mm of all T-sections shall be pre-painted with

polyester paint, all complete for all heights as per specifications,

drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles

of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of

G I sheet having galvanizing of 100 gms/sqm (both sides

inclusive) and electro statically polyester powder coated of

thickness 60 microns

(minimum), including factory painted after bending.

12mm cement plaster in single coat on fair side of single or half

brick wall for exterior plastering up to floor two level including

57 13.4.2 internal rounded angles chamfers, and/or rounded angles not 1289.660 SQM 304.23 3,92,358.77

exceeding 80mm in girth and finished even and smooth no extra

for mixing any additive. 1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on the rough side of single or half brick

wall of mix : 1:6 (1 cement: 6 coarse sand)

6 mm cement plaster on celling (a) 1:3(1 cement:3 fine sand)

Finishing walls with textured exterior paint of required shade:

60 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over 1289.660 SQM 253.23 3,26,576.86

and including priming coat of exterior primer applied @

Finishing walls with 100% Premium acrylic emulsion paint having

VOC less than 50 gm/litre and UV resistance as per IS

61 13.48A 15489:2004, Alkali & fungal resistance, dirt resistance exterior

paint of required shade (Company Depot Tinted) with silicon

New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over

13.48A.1 and including priming coat of exterior primer applied @ 0.90 105.914 SQM 159.64 16,907.65

62 13.50 Applying priming coat:

With ready mixed red oxide zink chromate primer of approved

13.50.3 brand and manufacture on steel galvanised iron/steel works. 905.990 SQM 57.36 51,970.93

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :

13.60.1 Two or more coats on new work. 3173.670 SQM 142.48 4,52,181.34

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade:

13.61.1 Two or more coats on new work. 905.990 SQM 135.86 1,23,091.51

Providing and applying white cement based putty of average

65 13.80 thickness 1 mm, of approved brand and manufacturer, over the 4463.330 SQM 128.01 5,71,345.89

plastered wall surface to prepare the surface even and smooth

K ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard tubular

sections/ appropriate Z sections and other sections of approved

make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up

the gaps at junctions, i.e. at top, bottom and sides with required

66 21.1 EPDM rubber/neoprene gasket etc. Aluminium sections shall be

smooth, rust free,straight, mitred and jointed mechanically

wherever required includingcleat angle, Aluminium snap beading

for glazing / paneling, C.P.brass / stainless steel screws, all

complete as per architecturaldrawings and the directions of

Engineer-in-charge. (Glazing, panelingand dash fasteners to be

paid for separately) :

21.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required

21.1.1.1 shade according to IS: 1868, Minimum anodic coating of grade 277.440 KG 448.52 1,24,437.96

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

21.1.2 for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required

shade according to IS: 1868, Minimum anodic coating of grade

Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber /

67 21.3 neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge . (Cost of aluminium

snap beading shall be paid in basic item):

CHANDRESH KUMAR

DSR- DESCRIPTION OF ITEM DSR Rates NS Rates AMOUNT DSR AMOUNT (Rs)

SL NO QUANTITY UNIT

2021 (Rs) (Rs) ITEM(Rs) [M.R. ITEM]

With float glass panes of 8 mm thickness (weight not

L Water Proofing

Providing and laying in situ seven course water proofing

treatmentwith APP (Atactic poly-propylene) modified Polymeric

memberane over roof consisting of first coat of bitumen primer @

0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @

1.20 Kg/sqm, which shall consist of blown type bitumen of grade

85/25 conforming to IS : 702, 3rd and 5th layers of roofing

membrane APP modified Polymeric membrane 1.5 mm thick of

2.25 Kg/sqm weight consisting of five layers prefabricated with

centre core as 20 micron HMHDPE film sandwiched on both sides

68 14.86 with polymeric mix and the polymeric mix is protected on both 58.000 SQM 635.65 36,867.80

side with 20 micron HMHDPE film. 7th, the top most layer shall

be finished with brick tiles of class designation 10 grouted with

cement mortar 1:3 (1cement : 3 fine sand) mixed with 2%

integral water proofing compound by weight of cement over a 12

mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and

finished neat (item of laying brick tiles shall be paid for

Providing and laying brick tiles over mumty roofs, grouted with

cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of

69 integral water proofing compound by weight of cement, over 12

mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and

With common burnt clay F.P.S. (non modular) brick tiles

of class designation 10

N Roof Sheeting

Providing and Fixing High Quality SELF SUPPORTING Roof system

with 1.3 mm thick Colour coated galvalume Sheet, all work shall

be executed as per technical specification and WITH PROPER

70 MR-1 DRAINAGE SYSTEM AS per direction of E/I 782.17 SQM 3256.00 25,46,732.50

Note: Approval of Shop drawing has to be taken from EIC before

Providing wood work in frames of false ceiling, partitions etc.

71 9.3 sawn and fixed in position with necessary stainless steel screws

9.3.2 Kiln seasoned and chemically treated hollock wood 0.183 Cum 66492.48 12,168.12

Providing and fixing cup board shutters 25 mm thick, with Pre-

laminated flat pressed three layer particle board or graded wood

particle board IS: 12823 marked, exterior grade (Grade l Type

72 9.129 ll), having one side decorative lamination and other side 25.000 Sqm 2049.28 51,231.98

balancing lamination, including IInd class teak wood lipping of 25

mm wide x12 mm thick with necessary screws and bright finished

stainless steel piano hinges, complete as per direction of the

Engineer-in-Charge

Providing and fixing Pre-laminated medium density fibre board

IS: 14587:1998 marked, with one side decorative lamination

other side balancing lamination Grade-I (exterior grade) in

73 9.157 shelves with screws and fittings wherever required, edges to be

sealed with PVC edge bending tape 2.00 mm thick of approved

brand (fittings to be paid separately).

Pre-laminated with decorative lamination one side and other side

9.157.1 balancing lamination exterior Grade - I MDF Board 18 mm thick 20.000 Sqm 1303.03 26,060.69

confirming to IS:14587

Providing and fixing magnetic catcher of approved quality in

74 9.114 cupboard / ward robe shutters, including fixing with necessary

screws etc. complete.

9.114.2 Double strip (horizontal type) 26.000 Each 35.30 917.72

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20

mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all

8.2.2 Granite of any colou and shade

8.2.2.2 Area of slab over 0.5 sqm 9.594 Sqm 4573.95 43,882.51

Providing & Fixing decorative high pressure laminated sheet of

plain /wood grain in gloss / matt/ suede finish with high density

76 9.127.1 protective surface layer and reverse side of adhesive bonding 27.956 Sqm 789.66 22,075.60

quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality 1 mm thick

Providing and fixing wooden moulded beading to door and

77 9.40.2.2 window frames with iron screws, plugs and priming coat on

unexposed surface etc. complete :

Kiln seasoned and chemically treated hollock wood 50x20mm 87.400 meter 189.20 16,535.80

Providing and fixing special quality chromium plated brass

78 9.90.2 cupboard locks with six levers of approved quality including 13.000 Each 295.91 3,846.88

necessary screws etc. complete. Size 50mm

Providing and fixing chromium plated brass handles with

necessaryscrews etc. complete: 100mm

CHANDRESH KUMAR

DSR- DESCRIPTION OF ITEM DSR Rates NS Rates AMOUNT DSR AMOUNT (Rs)

SL NO QUANTITY UNIT

2021 (Rs) (Rs) ITEM(Rs) [M.R. ITEM]

Providing & fixing at all heights, levels and locations Mill finish

Aluminium alloy roofing sheets of alloy IS designation 31500,

temper Hx8 conforming to IS 737 and dimensions as per IS code

2676 with characteristics of good formability and corrosion

resistance. The profile sheets shall be fixed to truss members in

slope or required pitch or curvature with Hex cap headed self

drilling/tapping Stainless steel screws M6, 50

mm long with 3 mm EPDM seal washer etc. all inclusive of labour,

scaffolding, T&P and sundries etc. complete as per directions of

the Engineer-In-Charge. (Cost of truss/frame work shall be paid

0.56mm Aluminium profile with center to center pitch of 175 mm,

depth of 46mm, top crest width of 41mm, bottom valley width of

12.64.4 80mm, overall profile width of 1144mm, cover width 1050mm. 25.000 Sqm 1241.54 31,038.41

Providing and fixing of Pre-coated colour or mill finish

Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy

31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO

designation)] For color, coating shall be 5-7 microns epoxy

81 12.66 primer on both sides of the sheet and polyester top coat 15-18

microns, using self drilling/tapping SS screws of size 6 x 50mm

with 3mm thick EPDM seal and SS plain washer complete

Precoated/mill finish aluminium Flashings/ Aprons

12.66.3 Precoated/mill finish aluminium North light curves 32.000 m 1004.17 32,133.59

Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

82 22.7 treatment of roofs, balconies, terraces etc consisting of following

Applying a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with water proofing compound conforming to IS.

2645 and approved by Engineer-in-charge over the RCC slab

including adjoining walls upto 300 mm height including cleaning

the surface before treatment.

Laying brick bats with mortar using broken bricks/brick bats 25

mm to 115 mm size with 50% of cement mortar 1:5 (1 cement :

5 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge

over 20 mm thick layer of cement mortar of mix 1:5 (1 cement

b :5 coarse sand ) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge to

required slope and treating similarly the adjoining

walls upto 300 mm height including rounding of junctions of walls

After two days of proper curing applying a second coat of cement

slurry using 2.75 kg/ sqm of cement admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-

Finishing the surface with 20 mm thick jointless cement mortar of

mix 1:4 (1 cement :4 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-

charge including laying glass fibre cloth of approved quality in top

layer of plaster and finally finishing the surface with trowel with

neat cement slurry and making pattern of 300x300 mm square 3

The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test.“All

above operations to be done in order and as directed and

specified by the Engineer-in-Charge :

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

Providing and fixing M.S. grills of required pattern in frames of

windows etc. with M.S. flats, square or round bars etc. including

83 9.48 priming coat with approved steel primer all complete.

9.48.1 Fixed to steel windows by welding 48.000 kg 187.08 8,979.74

Providing and fixing carbon steel galvanised ( minimum coating 5

micron) dash fastener of 10 mm dia double threaded 6.8 grade

(yield strength 480 N/mm2), counter sunk head, comprising of

84 10.27 10 mm dia polyamide

PA 6 grade sleeve, including drilling of hole in frame , concrete/

masonry, etc. as per direction of Engineer-in-charge.

Line marking for sports with latest marking equipment as per

85 MR-2 requirement of NVS in MP Hall, all complete in all respect 1.000 job 100000.00 1,00,000.00

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet

box for ceiling fan clamp, of internal dia 140 mm, 73 mm height,

top lid of 1.5 mm thick M.S. sheet with its top surface hacked for

86 10.18 proper bonding, top lid shall be screwed into the cast iron/ M.S. 191.42 1,914.19

sheet box by means of 3.3 mm dia round headed screws, one

lock at the corners. Clamp shall be made of 12 mm dia M.S. bar

bent to shape as per standard drawing.

CHANDRESH KUMAR

SUMMARY SHEET FOR PLUMBING WORKS INTERNAL &

SL No. DSR 2021 NS

I INTERNAL Works

A Sub head-I: SANITARY FIXTURES & FITTINGS 3,26,312.11 70,944.00

B SUB HEAD-II- SOIL , WASTE VENT AND RAIN WATER PIPE 49,454.32 1,67,219.10

C SUB HEAD- III - INTERNAL WATER SUPPLY 1,96,020.36 16,854.00

II EXTERNAL WORKS

A SUB HEAD- IV EXTERNAL SEWARAGE LINE 3,64,529.48 -

B SUB HEAD-V -EXTERNAL WATER SUPPLY 33,222.36 40,000.00

Digitally signed by

CHANDRESH KUMAR

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

SL NO 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

A. SUB HEAD -I : SANITARY FIXTURES & FITTINGS

DSR -17.2.1 Providing and Fixing white viterous china pedestal type water

closet ( European type WC Pan ) with seat and lid , 10 litre

low level White pvc flushing cistern , including flush pipe with

1 manually controlled device ( handle lever ) , Conforming to IS

: 7231 with all fittings and fixtures complete including cutting

and making good the walls and floors wherever required . WC

Pan with ISI marked white solid plastic seat and lid .

DSR -17.7 Providing and fixing wash basin with C.I. brackets, 15 mm

C.P. brass pillar taps, 32 mm C.P. brass waste of standard

2 pattern, including painting of fittings and brackets, cutting

and making good the walls wherever require :

White Vitreous China Wash basin size 630x450 mm with a

17.7.1 pair of 15 mm C.P. brass pillar tap 7 Each 2,351.39 16,459.76

DSR -17.31 Providing and fixing 600x450 mm beveled edge mirror of

3 superior glass ( of approved quality ) complete with 6 mm

thick hard board ground fixed to wooden cleats with C.P brass

screws and washers complete . 7 Each 1,458.54 10,209.75

Providing and fixing white vitreous china flat back half stall

urinal of size 580x380x350 mm with white PVC automatic

flushing cistern, with fittings, standard size C.P. brass flush

pipe, spreaders with unions and clamps (all in C.P. brass)

4 with waste fitting as per IS : 2556, C.I. trap with outlet

grating and other couplings in C.P. brass, including painting

of fittings and cutting and making good the walls and floors

wherever required :

17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic

flushing cistern 3 Each 19,169.24 57,507.72

DSR -8.10 Providing and fixing stone slab with table rubbed, edges

rounded and polished, of size 75x50 cm deep and 1.8 cm

thick, fixed in urinal partitions by cutting a chase of

5 appropriate width with chase cutter and embedding the stone

in the chase with epoxy grout or with cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm

nominal size) as per direction of Engineer-in-charge and

finished smooth.

5.1 8.10.2 Granite Stone of approved shade 3 Sqm 3,661.82 10,985.46

DSR -18.49 Providing & fixing C.P. brass bib cock of approved quality

conforming to IS :8931.

17.22A Providing and fixing CP Brass 32mm size bottle trap of

7 approved quality & make and as per the direction of

engineer in charge. 10 Each 916.01 9,160.10

DSR -18.53 Providing and fixing C.P. brass angle valve for basin mixer

8 and geyser points of approved quality conforming to IS:8931

DSR -18.21 Providing and fixing unplasticised P.V.C. connection pipe with

9 PTMT Nuts, collar and bush of approved quality and colour.

9.1 18.21.2.1 15 mm nominal bore with 45cm length 44 Each 88.06 3,874.68

DSR -18.53A Providing and fixing CP Brass extension nipple ( size 15mm x 50 mm ) of approved make and quality as per direction of engineer - in - charge .

DSR -17.28 Providing & fixing of Waste pipe for Wash basins & Sinks

including pvc waste fittings complete.

DSR -18.48 Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, ISI : 12701 marked, with

cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but

without fittings and the base support for tank.

DSR -18.58 Providing and fixing PTMT grating of approved quality and

Fixing, testing and commissioning health faucet in PVC

Flexible tube with wall hook,(spray unit, flexible hose and will

be supplied) a)mone number PVC Flexible tube of 1.5m

length fitted with wall flange: b) hand operated spray

unit(instant type)

NS-2 Providing and fixing vertical or horizontal storage type hot

water heater electrical operated fixed to wall with anchor

bolts & nuts, 15mm CP brass angle stop cock and 15mm CP

15.00 brass non-return valve complete including making

connections with 15mm dia CP connecting pipes on inlet and

outlet, suitable length of power cable and 15 amps plug .

13.1 a) 15 Litre Capacity 3 Each 12,081.00 36,243.00

16 17.34 Providing and fixing toilet paper holder :

17.71 Providing and fixing PTMT liquid soap container 109 mm wide,

125 mm high and 112 mm distance from wall of standard

17 shape with bracket of the same materials with snap fittings of

approved quality and colour, weighing not less than 105 gms.

Digitally signed by

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

SL NO 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

18.51 Providing and fixing CP brass long boby bib cock of approved

18 quality conforming to IS standards and weighing not less than

18.51.1 15mm nominal bore 6 Each 732.19 4,393.13

NS-12 Providing & Fixing of Grab bar size 600X600 mm pipe O.D 32

mm ,thiickness 2.5 mm of non slipping grip as per standard

specification of use in disabled toilet complete with brackets

suitable for wall installation as per approved sample complete

in all respect. 1 each 17,736.00 17,736.00

TOTAL AMOUNT SUB-HEAD-I

TOTAL AMOUNT SUB-HEAD-I

B. SUB HEAD-II- SOIL , WASTE VENT AND RAIN WATER

DSR -12.22 Making khurras 45x45 cm with average minimum thickness of

5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4

graded stone aggregate of 20 mm nominal size) over P.V.C.

1 sheet 1 mx1 mx400 micron, finished 12 mm cement plaster

1:3 (1 cement:3 coarse sand) and a coat of neat cement

rounding the edges and making and finishing the outlet

complete 4 Each 275.55 1,102.21

DSR -12.41 Providing and Fixing on wall unplasticised Rigid PVC Rain

water pipes conforming to IS : 13592 Type A , including

2 jointing with seal ring conforming to IS : 5382 , leaving 10

mm gap for thermal expansion

2.1 12.41.2 Single Socketed pipes 110 mm diameter 82 Metre 330.49 27,099.95

DSR -12.44 Providing and Fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams .

DSR -12.37 Providing and Fixing 100 mm diameter and 60 cm long rain

water spout in cement mortar 1:4 ( 1 Cement : 4 Fine Sand )

4.1 12.37.1 Stone Ware Spout 4 Each 146.87 587.49

DSR -12.42 Providing and Fixing on wall face Rigid Unplasticised UPVC

moulded fittings / accessories for unplasticised Rigid PVC Rain

5 water pipes conforming to IS : 13592 Type A including

jointing with seal ring conforming to IS : 5382 leaving 10 mm

gap for thermal expansion .

12.42.1 Coupler

12.42.2 Single Push Fit Coupler

12.42.3 Single Tee with door

12.42.4 Single Tee without door

12.42.5 Bend 87.5 degree

12.42.6 Shoe ( Plain )

DSR -12.43 Providing and Fixing unplasticised PVC pipe clips of approved

design to unplasticised - PVC rain water pipes by means of

50x50x50 mm hard wood plugs , screwed with MS screws of

6 required length , including cutting brick work with fixing in

cement mortar 1:4 ( 1 Cement : 4 Coarse Sand ) and making

good the wall etc . complete

NS-3 Providing and fixing uPVC 6 Kg/cm2 Soil , Waste & RWP

pipes (IS: 13592 Class B) including all fittings (plain or door)

e.g. bends, junction, cowls, offsets, access pieces, jointing

with rubber ring/solvent cement joints including cutting chase

or holes in walls and floors and making good wherever

NS-4 Providing & fixing in position upvc P"or S" trap of self cleaning

design of following sizes for the embedded areas Making

proper connection with chemical sealent joint , cutting chase

/ hole in floors /slabs and bringing the same in proper

condition in cement concrete 1:2:4 mix complete as required.

including cost of cutting and making good the walls and floors

where required.

8.1 a) 110 mm inlet and 110 mm outlet 9 Each 734.00 6,606.00

NS-5 Providing & fixing in position upvc floor drain including cost of

9 cutting and making good the walls and floors wherever

9.1 a) 110 mm inlet and outlet 8 Each 451.00 3,608.00

NS-6 Providing and fixing uPVC waste pipes for WB , SINK , URINAL

, FD (IS: 4985 ) 6 Kg / Sqcm including all fittings (plain or

door) e.g. bends, junction, cowls, offsets, access pieces,

10 jointing with rubber ring/solvent cement joints including

cutting chase or holes in walls and floors and making good

wherever required.

a) 32 mm OD pipe 10 Metre 282.00 2,820.00

b) 40 mm OD pipe 9 Metre 361.00 3,249.00

NS-7 Providing and fixing Cast bronze chrome plated grating with

ring and Stainless steel anti cockroach basket and two SS

screw including fixing to the floor with cement mortar.

Digitally signed by

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

SL NO 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

NS-8 Providing and fixing UPVC inlet fitting with maximum 3 inlets

32,40 or 50 mm size fabricated from 110 mm dia UPVC pipes

12 and fixed to upvc sockets,fixed to upvc trap with chemical

sealent joint and set in cement concrete as per standard

drawing complete.

NS-9 Providing and fixing upvc cleanout plug( Ceiling or Floor) with

13 suitable insert keys for opening, male threaded joint with

upvc socket fixed to uPVC pipe complete in all respects.

13.1 a) 110 mm diameter Pipe 2 Each 538.00 1,076.00

b) 75mm dia pipe 2 Each 495.00 990.00

TOTAL OF SUB-HEAD-II

C. SUB HEAD- III - INTERNAL WATER SUPPLY

DSR -18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

1 fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement

and the cost of cutting chases and making good the same

including testing of joints complete as per direction of

Concealed work, including cutting chases and making

good the walls etc.

1.1 18.8.1 15 mm nominal outer dia Pipes 90 Metre 455.96 41,036.74

1.2 18.8.2 20 mm nominal outer dia Pipes 69 Metre 531.00 36,639.12

1.3 18.8.3 25 mm nominal outer dia Pipes 50 Metre 647.07 32,353.64

1.4 18.8.4 32 mm nominal outer dia Pipes 25 Metre 736.68 18,417.10

DSR -18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

2 fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of Engineer in

Internal work - Exposed on wall

2.1 18.7.3 25mm nominal bore 15 Metre 421.70 6,325.51

2.2 18.7.4 32 mm nominal bore 14 Metre 517.77 7,248.81

2.3 18.7.5 40mm nominal bore 15 Metre 696.99 10,454.92

2.4 18.7.6 50mm nominal bore 17 Metre 958.13 16,288.19

3 18.16 Providing and fixing brass stop cock of approved quality :

4 18.17 Providing and fixing gun metal gate valve with CI

4.2 18.17.1A 20mm Nominal Bore 2 each 477.26 954.51

Supplying ficing testing and commissioning of butterfly valve

DSR- of PN 1.6 rating with bronze/gunmetal seat duly ISI marked

2019/11 complete with nuts bolts washers gaskets conforming to IS

13095 of following sizes as required:-

NS-9 Providing and fixing Thermoflex or Careflex thermal insulation

tubing, a elastomeric flexible material having hermetic blister

6 closed cell structure of expanded synthetic rubber over pipes

of following nominal bores and thickness including all required

accessories complete as per specification.

9 mm thick ( Pipes in Chases)

6.1 a) For 15 mm dia Pipe 15 Metre 92.00 1,380.00

6.2 b) For 20 mm dia Pipe 10 Metre 101.00 1,010.00

NS-10 Providing and Fixing full way lever operated forged brass ball

valve of brass body with forged brass hard chromeplated

7 steel ball tasted to a pressure not less than 15 kg/sqcm with

threaded / flanged joints complete with nuts, bolts, gaskets,

7.1 a) 15mm dia nominal bore 1 Each 250.00 250.00

7.2 b) 20mm dia nominal bore 1 Each 340.00 340.00

7.3 c) 25mm dia nominal bore 1 Each 512.00 512.00

7.4 d) 32mm dia nominal bore 1 Each 774.00 774.00

7.5 e) 40 mm dia nominal bore 1 Each 1,195.00 1,195.00

NS-11 Providing, fixing, testing and commissioning of motorised

butterfly valve of following dia for filling of overhead water

tank complete with high and low level control switches to

control tanks. The level controllers shall be installed in

8 overhead tanks. The level switch will close the valve when

water level is high in overhead tank and open the valve when

overhead water tank level is low. The system should be

complete in all respects with accessories 220 V AC / 24 V DC,

IP67 electrical water level control unit, copper control wiring

8.1 a) 40mm dia normal bore 1 Each 11,393.00 11,393.00

17.22B Providing and fixing CP Brass Single lever telephonic wall

mixer of quality & make as approved by Engineer in charge.

(a) 15mm Nominal Dia 2 each 6,324.63 12,649.26

18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet

18.52 Providing and fixing C.P. brass stop cock (concealed) of

standard design and of approved make conforming to

18.52.1 15mm nominal bore 2 each 614.72 1,229.44

Digitally signed by

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

SL NO 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

TOTAL OF SUB HEAD - III

SUB HEAD- IV EXTERNAL SEWARAGE LINE

2.1 Excavating trenches of required width for pipes, cables, etc

including excavation for sockets, anddressing of sides,

ramming of bottoms, depth up to 1.5 m, including getting out

the excavated soil, and then returning the soil as required, in

1 layers not exceeding 20 cm in depth, including consolidating

each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed,within a lead

1.1 2.10.1 All kinds of soil

1.1.1 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding

19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-

1 complete with C.I. grating brick masonry chamber with

water tight C.I. cover with frame of 300x300 mm size (inside)

the weight of cover to be not less than 4.50 kg and frame to

be not less than 2.70 kg as per standard design: 100x100

mm size P type. With common burnt clay F.P.S. (non

modular) bricks of class designation 7.5

19.7 Constructing brick masonry manhole in cement mortar 1:4 (

1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20

mm nominal size), foundation concrete 1:4:8 mix (1 cement

: 4 coarse sand : 8 graded stone aggregate 40 mm nominal

size), inside plastering 12 mm thick with cement mortar 1:3

3 (1 cement : 3 coarse sand) finished with floating coat of neat

cement and making channels in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) finished with a floating coat of neat cement

complete as per standard design :

19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover

with frame (light duty) 455x610 mm internal dimensions,total

3.1 weight of cover and frame to be not less than 38 kg (weight

of cover 23 kg and weight of frame 15 kg) :

19.7.1.1 With common burnt clay F.P.S.(non modular) bricks of class

3.1.1 designation 7.5

19.28 Constructing brick masonry road gully chamber 45x45x77.5

cm with bricks in cement mortar 1:4 (1 cement : 4 coarse

4 sand ) with precast R.C.C. vertical grating complete as per

standard design :

19.28.1 with common burnt clay F.P.S.(non module) brick of class

designation 7.5 10 EACH 6,468.35 64,683.50

19.1 Providing, laying and jointing glazed stoneware pipes class SP-

5 1 with stiff mixture of cement mortar in the proportion of 1:1

(1 cement : 1 fine sand) including testing of joints etc.

19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5

6 coarse sand : 10 graded stone aggregate 40 mm nominal

size) all-round S.W. pipes including bed concrete as per

6.1 19.2.2 standard

150 design : S.W. pipe

mm diameter 3.5 CUM 6,253.83 21,888.41

19.16 Providing orange colour safety foot rest of minimum 6 mm

thick plastic encapsulated as per IS : 10910, on 12 mm dia

steel bar conforming to IS: 1786, having minimum cross

section as 23 mmx25 mm and over all minimum length 263

mm and width as 165 mm with minimum 112 mm space

between protruded legs having 2 mm tread on top surface by

ribbing or chequering besides necessary and adequate

anchoring projections on tail length on 138 mm as per

standard drawing and suitable to with stand the bend test

and chemical resistance test as per specifications and having

manufacture's permanent identification mark to be visible

even after fixing, including fixing in manholes with 30x20x15 28 EACH 503.46 14,096.79

cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :

19.21 Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls,

floors with cement concrete 1:2:4 mix (1 cement : 2 coarse

8 sand : 4 graded stone aggregate 20 mm nominal size)

cement plastered on both sides with cement mortar 1:3 (1

cement : 3 coarse sand), finished with a floating coat of neat

cement and making necessary channels for the drain etc.

8.1 19.21.1 For pipes 100 to 250 mm diameter 1 EACH

19.9 Constructing brick masonry circular type manhole 0.91 m

internal dia at bottom and 0.56m dia at top in cement mortar

1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm

thick with cement

9 mortar 1:3 (1 cement : 3 coarse sand) finished with a floating

coat of neat cement, foundation concrete 1:3:6 mix (1

cement : 3 coarse sand : 6 graded stone aggregate 40 mm

nominal size), and makingnecessary channel in cement

concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size)

19.9.1 0.91 m deep with SFRC cover and frame (heavy duty, HD- 20

grade designation) 560 mm internal diameter conforming to

I.S. 12592, total weight of cover and frame to be not less

than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2

9.1 coarse sand : 4 graded stone aggregate 20 mm nominal size)

including centeing, shuttering all complete. (Excavation, foot

rests and 12mm thick cement plaster at

the external surface shall be paid for separately) :

9.1.1 19.9.1.1 With common burnt clay F.P.S. (non modular) 1 EACH 12,285.60 12,285.60

TOTAL OF SUB HEAD - IV 3,64,529.48 -

Digitally signed by

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

SL NO 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

SUB HEAD- V EXTERNAL WATER SUPPLY

MR Supplying, installing, testing and commissioning vertical on

line multi stage centrifugal pumping set with mechanical

seal, C.I. volute and SS impeller & SS shaft connected to a

TEFC induction motor of suitable HP for 415 volts, 3 phase,

50 cycles A.C. supply with 150 mm dia pressure gauge with

SS/gunmetal isolation cock, vibration eliminating pads, base

plate wiring upto panel and equipment for water level

controller to start and stop the pump automatically at

Domestic levels

water of the(Treated

pumps water in water

the tank with provision

transfer pump to of

Capacity 50 lpm

Providing and fixing G.I. pipes complete with G.I. fittings

2 and clamps, i/c cutting and making good the walls etc.

Internal work - Exposed on wall

18.12 Providing and fixing G.I. pipes complete with G.I. fittings

3 including trenching and refilling etc.

TOTAL OF SUB HEAD - IV 33,222.36 40,000.00

Digitally signed by

SUMMARY SHEET FOR FIRE FIGHTING WORKS

SUB HEAD DESCRIPTION AMOUNT DSR AMOUNT NSI

A SUB HEAD - A : PUMPS & EQUIPMENTS 1,42,992.69 -

B SUB HEAD - B : PIPING HYDRANT & ACCESSORIES SYSTEM

Digitally signed by

CHANDRESH KUMAR

BOQ OF FIRE FIGHTING

MP HALL rates (Rs) AMOUNT(Rs)

S.No No. DSR Description of items UNIT

QTY DSR NSI DSR NSI

A. SUB HEAD - A : PUMPS & EQUIPMENTS

1 18.4 Supplying , Installation , Testing and Commissioning of

Electric Driven Terrace Pump Suitable for Automatic

operation and Consisting of Following Complete in all

1.1 a) Horizontal Type Multistage , Centrifugal Pump of Cast

Iron Body and Bronze Impeller with Stainless Steel

1.2 b) Suitable HP Squirrel cage Induction motor , TEFC ,

synchronous speed 1500 RPM , Suitable for operation

on 415 Volts 3 Phase 50 Hz AC Supply with IP 68

protection for enclosure Horizontal Foot Mounted type

with class F insulation Conforming to IS : 325 with

Energy Efficiency class IE-3

1.3 c) MS Fabricated Common Base Plate Coupling , Coupling

Guard Foundation bolts etc as Required

1.4 d) Suitable Cement Concrete Foundation duly Plastered

with anti vibration Pads

The Head of the Pump is Selected in a manner so as to

give a minimum 3.5 kg/sqcm pressure at the highest /

2 18.20 Supplying and Fixing Air Vessel made of 450 mm dia 8

mm thick ms sheet 2000 mm in height with air release

valve on top and flanged connection to riser drain

arrangement with 25 mm dia gunmetal wheel valve

with required accessories pressure gauge and painting

with synthetic enamel paint of approved shade as

TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD A 1,42,992.69 -

B. PIPING, HYDRANT , AND ACCESSORIES SYSTEM

1 18.7 Providing Laying Testing and Commissioning of C class

Heavy duty MS Pipe Conforming to IS : 1239 / 3589

including Fittings like elbows , tees , flanges , tapers ,

nuts , bolts , gaskets etc in ground including welding

excavation and Providing cement concrete blocks as

supports anticorrosive treatment with coaltar / asphalts

tape as per IS :10221 refilling the trench etc of

following sizes complete as required .

2 18.11 Supplying Fixing Testing and Commissioning of

butterfly valve of PN 1.6 Rating with Bronze Gunmetal

Sheet duly ISI marked complete with nuts , bolts ,

washers , gaskets conforming to IS : 13095 of following

sizes as required .

3 18.14 Providing Installation Testing and Commissioning of

Non Return Valve of following sizes conforming to IS :

5312 complete with rubber gasket , GI Bolts , Nuts ,

4 18.15 Providing Installation Testing and Commissioning of

Stainless Steel Y Strainer fabricated out of 1.6 mm

thick stainless steel , Grade 304 , Sheet with 3 mm dia

5 18.9 Supplying and Fixing Single Headed Internal Hydrant

Valve with instantaneous gunmetal material coupling of

63 mm dia with cast iron wheel ISI marked conforming

to IS : 5290 ( Type A ) with blank Gunmetal material

cap and chain as required .

5.1 18.9.1 Single Headed Gunmetal Material 3 Set 7902.75 23,708.26

6 18.13 Supplying and Fixing orifice plate made out of 6 mm

thick stainless steel ( Grade 304 ) with orifice of

required size to be fitted between flange and landing

valve of external and internal hydrants to reduce

pressure at the outlet to the level of 3.5 kg / sqcm

complete as required . 4 Each 1365.36 5,461.44

7 18.16 Supplying and Fixing 63 mm dia 15 m Long RRL Hose

pipe with 63 mm dia male and female coupling duly

bound with GI wire , rivet etc . Conforming to IS : 636

7.1 18.16.1 Gunmetal Material 3 Set 5376.68 16,130.05

8 18.17 Supplying and Fixing First aid hose reel with MS

Construction Spray painted in Post office red

conforming to IS : 884 complete with the following as

CHANDRESH KUMAR

BOQ OF FIRE FIGHTING

MP HALL rates (Rs) AMOUNT(Rs)

S.No No. DSR Description of items UNIT

QTY DSR NSI DSR NSI

20 mm nominal internal dia water hose thermoplastic (

Textile Reinforced ) Type - 2 as per IS : 12585

20 mm nominal internal dia gunmetal globe valve and

Drum and Brackets for fixing the equipments on wall

Connections from Riser with 25 mm dia stop gunmetal

valve and MS Pipe and socket

9 18.18 Supplying and Fixing 63 mm dia Gunmetal Short

Branch Pipe with 20 mm nominal internal diameter size

nozzle conforming to IS : 903 suitable for

9.1 18.18.1 Gunmetal Material 6 Set 2497.13 14,982.78

10 18.22 Providing and Fixing of Pressure Switch in MS Pipe Line

including connection etc as required 1 Each 1597.91 1,597.91

11 NS-1 Providing and fixing of Fire Hose Cabinet size not less

than 2.1 x 1.2 x 0.90 mtr made out of M.S. sheet not

less than 1.5 mm thick having central opening and 4

mm thick glazed glass doors (Two nos.) suitably

marked on the outside 'with the letters "FIRE HOSE"

including necessary locking arrangement and painting

in PO red colour suitable to accommodate, internal

hydrant valve, 2 nos 15 mtr long Hose pipe, branch

pipe, nozzle and fire man's axe. It shall be fixed inside

the FHC Cabinet Complete as required .

12 NS-2 Providing and fixing weather proof Fire Hose Cabinet of

size not less than 0.75 x 0.6 x 0.25 mtr made out of

M.S. sheet not less than 1.5 mm thick having central

opening and 4 mm thick glazed glass doors (Two nos.)

suitably marked on the outside 'with the letters "FIRE

HOSE" including necessary locking arrangement and

painting in PO red colour suitable to accommodate,

external yard hydrant valve, 2 nos 15 mtr long Hose

pipe, branch pipe, nozzle and fire man's axe. It shall be

mounted on boundary wall complete as required.

13 NS-3 Providing & fixing Controlled Percolating (CP) Hose ISI

marked (IS:8423) 63 mm dia x 15 m long complete

with instantaneous type Stainless steel 63 mm dia ISI

marked Male & Female couplings (IS:903) bound and

riveted to hose pipe with copper rivets and 1.5 mm

copper wire.brusting pressure not less than 22

Kg/Sqcm. ( Two nos. for each hydrant-valve)

14 NS-4 Providing and fixing standard firemans axe with heavy

rubber handle. 3 Each 1467.00 4,401.00

15 NS-5 Providing and fixing dial type pressure gauge with

isolation cock and copper pipe on main header Dial

diameter 100 mm celebration 0-16 / sq. cm. 12 Each 3458.00 41,496.00

16 NS-6 Providing and fixing Fire Extinguishers (CO2 type

powder ) 4 Kg Capacity complete with all accessories 1 Each 5647.00 5,647.00

17 NS-7 Providing and fixing Fire Extinguishers (A, B, C type

powder ) 5 Kg Capacity complete with all accessories 14 Each 4518.00 63,252.00

TOTAL CARRIED TO SUMMARY SHEET FOR SUB HEAD B 5,03,905.39 2,72,329.00

CHANDRESH KUMAR

COST SUMMARY FOR ELECTRICAL WORKS

SL No. DSR 2021 NS

I INTERNAL Works

A SUBHEAD - I - CIRCUIT CUM POINT WIRING 11,19,198.67 59,965.14

B SUBHEAD - II - FITTINGS & FIXTURES 27,385.74 5,64,160.52

C SUBHEAD - III - MAIN BOARDS - 1,90,800.00

SUBHEAD - IV - DISTRIBUTION BOARDS 90,394.84 -

II EXTERNAL WORKS

A SUBHEAD - V - EARTHING 67,131.02 16,000.00

B SUBHEAD - VI - SUPPLYING & LAYING OF CABLE 15,563.65 35,231.06

SUB HEAD -VII :EXTERNAL LIGHT 70,537.32

Digitally signed by

CHANDRESH KUMAR

BOQ OF ELECTRICAL WORKS

Rates (Rs) Amount(Rs)

S.No. Item No. Description of items Unit

Qty DSR NS DSR-2022 NS

SUBHEAD - I - CIRCUIT CUM POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core

1 DSR 1.10 cable in surface / recessed medium class PVC conduit, with

modular switch, modular plate, suitable GI box and earthing the

point with 1.5 sq.mm FRLS PVC insulated copper conductor single

core cable etc. as required.

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point ( without Independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

2 DSR-1.55 conductor single core cable in surface/ recessed PVC conduit,

and earthing the point with 1.5 sq. mm FRLS PVC insulated

copper conductor single core cable etc as required. (Switch

Control Secondary Points)

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed steel conduit, with

3 DSR-1.3 modular switch, modular plate, suitable GI box and earthing

the point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required. (Switch

Control Primary Points)

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without Independent

switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

4 DSR-1.54 conductor single core cable in surface/ recessed steel

conduit, and earthing the point with 1.5 sq. mm FRLS PVC

insulated copper conductor single core cable etc as required.

(Switch Control Secondary Points)

MCB CONTROL LIGHT POINTS

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 2.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed steel conduit, with

5 NSI-1 modular switch, modular plate, suitable GI box and earthing

the point with 2.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required. (Switch

Control Primary Points)

5.1 NSI-1.1 Primary point controlled by one MCB. Point 12 1,535.50 18,426.00

Same as item above but Secondary point. i.e. Points to be

5.2 NSI-1.2 looped with Primary point with 2.5 sqmm wire and Point wiring Point

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated

copper conductor single core cable in surface/ recessed steel

6 DSR 1.5 conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper Metre

conductor single core cable for loop earthing as required. 350 447.54 1,56,639.05

Wiring for circuit/ submain wiring alongwith earth wire with the

7 DSR 1.7 following sizes of FRLS PVC insulated copper conductor, single

core cable in surface/ recessed steel conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

7.1 DSR 1.7.1 Metre

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

7.2 DSR 1.7.2 Metre

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

7.3 DSR 1.7.4 Metre

2 x 10 sq. mm + 1 x 6 sq.mm earth wire

7.4 DSR 1.7.5 Metre

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

7.5 DSR 1.7.10 Metre

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

7.6 DSR 1.7.11 Metre

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

8 DSR 1.31 fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular Each

switch, connections etc. as required.

Supply and Wiring for 250 volts single phase and neutral 2 Nos 6

amps socket outlate with control by 1 No switched with 2.5

sq.mm PVC insulated copper conductor 1100 volts grade

stranded flexible FRLS wires in concealed or surface mounted 25

mm dia 2mm thick PVC conduit including providing and fixing of

9 NSI-2 6 amps 3 pin switch socket outlet of aprpoved make and design in Each

2 mm thick GI box with grid plate and earthing of third pin of the

socket with 2.5 Sq. mm PVC insulated copper conductor

stranded flexible FRLS wire.(maximum four no. of switches

socket shall be connected on one circuit)

Supplying and fixing suitable size GI box with modular plate and

cover in front on surface or in recess, including providing and

10 DSR 1.32 fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A Each

modular switch, connections etc. as required.

CHANDRESH KUMAR

Rates (Rs) Amount(Rs)

S.No. Item No. Description of items Unit

Qty DSR NS DSR-2022 NS

Supplying and fixing 3 pin, 5 A ceiling rose on the existing

11 DSR-1.33 junction box/ wooden block including connections etc. as Each

Supplying & fixing suitable size GI box wih modular plate and

cover in front on surface or in recess i/c providing and fixing 25

12 DSR-1.57 amp modular socket outlet and 25 Amps modular SP MCB, “C” Each

curve including connection, painting etc. as required. (AC's &

Supplying and fixing following modular switch/ socket on the

13 DSR 1.24 existing modular plate & switch box including connections but

excluding modular plate etc. as required.

13.1 DSR 1.24.6 Telephone socket outlet Nos 4 152.97 611.88

Supplying and fixing following size/ modules, GI box alongwith

14 DSR 1.27 modular base & cover plate for modular switches in recess etc. as

Supplying and fixing following size/ modules, GI box alongwith

15 DSR 1.24 modular base & cover plate for modular switches in recess etc. as

15.1 DSR 1.24.4 3 pin , 5/6 amps socket outlet Each 2 126.10 252.19

Supplying and fixing following size/ modules, GI box alongwith

16 DSR 1.27 modular base & cover plate for modular switches in recess etc. as

Supplying and fixing of following sizes of medium class PVC

17 DSR 1.21 conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of recessed

conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC

insulated annealed copper conductor, unarmored telephone cable

18.1 1.18 in the existing surface/ recessed steel/ PVC conduit as required.

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - I

SUBHEAD - II - FITTINGS & FIXTURES

Supply, Installation, Testing and Commissioning of 9 W Bulk head

Supply, Installation, Testing and Commissioning of 5W Mirror

Supply, Installation, Testing and Commissioning of 18W

Recessed/Surface Mounted LED circular Downlighter. 83 1,975.94 1,64,003.02

Supply, Installation, Testing and Commissioning of 20W

Wall/Surface mouted 4 ft. LED 15 1,975.94 29,639.10

Supply, Installation, Testing and Commissioning of 65W Surface

mounted LED Bay light. 10 6,107.46 61,074.60

Supply, Installation, Testing and Commissioning of 12W Recessed

6 NSI-6 mounted LED circular Downlighter (Cat no-Bajaj Lighting BGSLO Each

SLEEK SURFACE 12W WH RD or equivalent as specified in the

approved list of make) 37 1,167.60 43,201.20

Supply, Installation, Testing and Commissioning of 150W

highway with 150LPW Ceiling mounted LED Light Fixtures 6 7,469.82 44,818.92

Supply, Installation, Testing and Commissioning of 250W Highway

8 NSI-8 with 130LPW ceiling mounted LED Light Fixtures Each 16

Supply, Installation, Testing and Commissioning of 1200 mm

sweep, BEE 5 star rated, ceiling fan with Brush Less Direct

Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm

long down rod, 2 nos. canopies, shackle kit, safety rope, copper

winding, Power Factor not less than 0.9, Service Value (CM/M/W)

minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM

(tolerance as per IS : 374-2019), THD less than 10%, remote or

9 DSR 19.1 Each

electronic regulator unit for speed control and all remaining

accessories including safety pin, nut bolts, washers, temperature

rise=75 degree C (max.), insulation resistance more than 2 mega

ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing

etc. complete as required.

Supplying and fixing two module stepped type electronic fan

regulator on the existing modular plate switch box including

10 DSR 1.25 connections but excluding modular plate etc. as required. Each

CHANDRESH KUMAR

Rates (Rs) Amount(Rs)

S.No. Item No. Description of items Unit

Qty DSR NS DSR-2022 NS

Installation, testing and commissioning of ceiling fan, including

11 DSR 1.44 wiring the down rods of standard length (upto 30 cm) with 1.5 sq. Each

mm FRLS PVC insulated, copper conductor, single core cable etc.

as required. 8 220.15 1,761.22

Supply of 300 mm dia heavy duty Domestic Exhaust Fan

12 NSI-9 Each

13 NSI-10 Supply of Heavy Duty 450mm Heavy Duty Wall fan Each 3 6,900.00 20,700.00

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - II

SUBHEAD - III - MAIN BOARDS

Supplying, installing, testing & commissioning of following type

compartmentalised wall mounted / floor mounted cubicle board

made from 2mm thick CRCA sheet dust & vermin proof duly

1 phosphatized & powder coated inclusive of suitable size 4 strip Al.

Busbar complete with interconnection providing Lugs, inter-

earthing, painting etc. i/c providing & fixing below noted

Receiving,unloading,storing, handling, installation, testing and

commissioning of following MV Switchboards complete as required

and as per site condition and dimension of all panels shall be

carried out as per the attachad sld

1.1 NSI-1 MAIN LT PANEL ( FOR BUILDING ) Set 1 1,50,800.00 1,50,800.00

2.1 NSI-2 FIRE FIGHTING PANEL Set 1 40,000.00 40,000.00

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - III - 1,90,800.00

SUBHEAD - IV - DISTRIBUTION BOARDS

Supplying and fixing following way, single pole and neutral, sheet

steel, MCB distribution board, 240 V, on surface/ recess, complete

1 DSR 2.3 with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

1.2 DSR 2.3.2 8 way, Double door Each 1 2,659.40 2,659.40

1.3 DSR 2.3.3 12 way, Double door Each 2 2,392.74 4,785.48

Supplying and fixing following way, three pole and neutral, sheet

steel, MCB distribution board, 415 volts, on surface/ recess

2 DSR 2.4 complete with tinned copper busbar, neutral busbar, earth bar,

din bar, detachable gland plate, interconnections, phosphatized

and powder painted including earthing etc. as required. (But

without MCB/ RCCB/ Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

4 DSR 2.10 curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 V, isolator

5 DSR 2.12 in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in

6 DSR 2.13 the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase

and neutral), 240 V, residual current circuit breaker (RCCB),

7 DSR 2.14 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc.

Supplying and fixing DP sheet steel enclosure on surface/ recess

8 DSR-2.16 along with 25/32 A 240 V "C" curve DP MCB complete with Each

connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing

9 DSR 2.11 Each

MCB DB complete etc. as required. 5 13.44 67.18

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - IV 90,394.84 -

SUBHEAD - V - EARTHING

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonary enclosure with

1 DSR 5.4 cover plate having locking arrangement and watering watering Sets

pipe 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick

including accesssories, and providing masonary enclosure with

2 DSR 5.6 cover plate (CI heavy duty) having locking arrangement and Sets

watering pipe pipe of 2.7 mtr long etc. with charcoal or coke and

salt) as required. 1 14,302.68 14,302.68

Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I.

3 DSR 5.11 pipe from earth electrode, including connection with G.I. nut, bolt, Mtr

spring, washer excavation and refilling etc. as required.

CHANDRESH KUMAR

Rates (Rs) Amount(Rs)

S.No. Item No. Description of items Unit

Qty DSR NS DSR-2022 NS

Providing and fixing 25 mm X 5 mm copper strip on surface or in

4 DSR-5.14 recess for connections etc. as required. 2 nos used for 50 x 5 for Mtr

the Neutral earthing of euipments ) 20 1,201.02 24,020.40

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

5 DSR 5.15 Mtr

recess for connections etc. as required. 20 252.19 5,043.87

Providing and fixing 6 SWG dia G.I. wire on surface or in recess

6 DSR 5.16 Mtr

for loop earthing etc. as required. 20 72.35 1,447.01

Supply and laying medium class GI pipe under road/paved

8 NSI-2 areas/wall crossing etc. including earth excavations refilling,

ramming and making good as approved.

8.1 NSI-2.1 150 mm dia GI pipe Class B Metre 10 1,600.00 16,000.00

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - V 67,131.02 16,000.00

SUBHEAD - VI - SUPPLYING & LAYING OF CABLE

Laying of one number PVC insulated and PVC sheathed / XLPE

power cable of 1.1 KV grade of following size direct in ground

1 DSR 7.1 including excavation, sand cushioning, protective covering and

refilling the trench etc. as

Laying of one number additional PVC insulated and PVC sheathed

/ XLPE power cable of 1.1 KV grade of following size direct in

ground in the same trench in one tier horizontal formation

2 DSR 7.2 including excavation, sand cushioning, protective covering and

refilling the trench etc. as required.

Supply of following sizes of XLPE insulated Aluminum conductor

3 NSI strip/ wire Armoured, overall PVC sheathed 1.1 KV grade cables

conforming to relevant IS-7098 Code and technical specifications.

Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated and

4 DSR 9.1 PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - VI 15,563.65 35,231.06

SUB HEAD -VII :EXTERNAL LIGHT

Supplying, installation, testing and commissioning of 65W LED

Street Light IP66 LED with High performance having system

lumen output of minimum 9900 lumens, contemporary designed

housing made of die-cast aluminium, with street optic LENS for

1 NSI-1 uniform light distribution. PF better than 0.9, CRI better than 70 Nos

complete with all accessories. Wipro Cat No.: LR 02-102-XXX-57-

G2 Street light

SITC of 6m ht. GI pole alongwith control box,6A MCB etc. as

required for St. height 4 10,000.00 40,000.00

TOTAL CARRIED TO SUMMARY FOR SUBHEAD -VII - 70,537.32

CHANDRESH KUMAR

BOQ for LV Works (Fire Fighting)

Sl. Total Rates (Rs) AMOUNT(Rs)

Item No. Description of items Unit

No. Qty. DSR NSI DSR-2022 NSI

Main Building-MP Hall

Supplying, installation, testing & commissioning sector panel

suitable for following zones, complete with visual indications for

DSR short circuit fault, open circuit fault, fire condition and all other

1 standard facilities as per IS:2189 with mimic diagram for all

area/zone covered, complete with all connections,

interconnections as required

Supplying, installation, testing & commissioning of conventional

2 NS-1 beam detector with short circuit isolator (inbuilt or seperate) Nos. 2 43,644 87,288

complete with emitter and receiver including connections with

remote test features etc complete as

Supplying, installation, testing & commissioning of smoke

3 detector with builtin LED and mounting base complete with all Nos. 10 1,179 11,793

17.1.2 connections etc. as required

Supplying, installation, testing & commissioning of manual call

DSR boxes of MS construction in surface/recess with stainless steel

4 chain & hammer assembly complete with glass and push button

etc. as required.

Supplying, installation, testing & commissioning fire alarm

sounder with facility to make announcement, mounted in M.S.

DSR box (16 SWG) with hinged cover plate & suitable for operation

17.1.6 with amplifier i/c line matching transformer etc. complete as

Supplying & laying of 2x1.5 sqmm fire alarm armoured

DSR cable, 600/1000V rated with annealed copper conductor

6 having XLPE insulation, steel wire armouring & FRLS outer Mtrs 160 146 23,318 -

sheath complete as required.

Supplying and fixing of following sizes of steel conduit

along with accessories in surface/recess including painting

7 DSR 1.20 in case of surface conduit, or cutting the wall and making

good the same in case of recessed conduit as required.

CHANDRESH KUMAR

S.N. DESCRIPTION OF ITEM QUANTITY UNIT DSR Rates (Rs) AMOUNT DSR ITEM

Preparation and consolidation of sub grade with power road roller

of 8 to 12 tonne capacity after excavating earth to an average of

1 22.5 cm depth, dressing to camber and consolidating with road

roller including making good the undulations etc. and re-rolling the

sub grade and disposal of surplus earthwith lead upto 50 metres..

Excavating, supplying and filling of local earth (including royalty)

by mechanical transport upto a lead of 5km also including

ramming and watering of the earth in layers not exceeding 20 cm

in trenches, plinth, sides of foundation etc. complete.

Construction of granular sub-base by providing close graded

Material conforming to specifications, mixing in a mechanical mix

plant at OMC, carriage of mixed material by tippers to work site,

3 16.78 for all leads & lifts, spreading in uniform layers of specified

thickness with motor grader on prepared surface and compacting

with vibratory power roller to achieve the desired density,

complete as per specifications and directions of Engineer-in-

With material conforming to Grade-I (size range 75 mm to

0.075 mm) having CBR Value-30

Construction of dry lean cement concrete sub base over a prepared

sub-grade with coarse and fine aggregate conforming to IS:383,

the size of coarse aggregate not exceeding 25 mm, aggregate

ratio not to exceed 15:1, aggregate gradation after blending to be

as per specifications, cement content not to be less than 150

Kg/cum, optimum moisture content to be determined during trial

length construction, concrete strength not to be less than 10 Mpa

at 7 days, mixed in a batching plant, transported to site, for all

leads & lifts, laid with a mechanical paver, compacting with 8-10

tonne vibratory roller, finishing and curing etc. complete as per

direction of Engineerin- charge.

Providing and filling in position rubberized bitumen hot sealing width per

5 16.46 compound for sealing of expansion joints in roads / pavements all cm depth

complete as per direction of the Engineer-in-Charge. per m

16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. 15609.00 ₹ 7.75 ₹ 1,20,998.63

Providing and laying C.C. pavement of mix M-25 with ready mixed

concrete from batching plant. The ready mixed concrete shall be

laid and finished with screed board vibrator , vacuum dewatering

process and finally finished by floating, brooming with wire brush

etc. complete as per specifications and directions of Engineer-

incharge. (The panel shuttering work shall be paid for separately).

Note:- Cement content considered in M-30 is @ 330 kg/cum.

Excess/ less cement used as per design mix is payable/ 28.22 cum ₹ 8,555.51 ₹ 2,41,436.50

recoverable separately.

Providing and laying at or near ground level factory made kerb

stone of M-25 grade cement concrete in position to the required

line, level and curvature, jointed with cement mortar 1:3 (1

cement: 3 coarse

sand), including making joints with or without grooves (thickness

of joints except at sharp curve shall not to more than 5mm),

including making drainage opening wherever required complete

etc. as per direction of Engineer-in-charge (length of finished kerb

edging shall be measured for payment). (Precast C.C. kerb stone

shall be approved by Engineer-in-charge).

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade :

Two or more coats on new work over an under coat of

suitable shade with ordinary paint of approved brand and 10.00 Sqm ₹ 197.83 ₹ 1,978.27

TOTAL CIVILW ORK

Digitally signed by

CHANDRESH KUMAR

DESCRIPITION OF ITEM QTY. UNIT DSR Rates AMOUNT

Sl. DSR- (Rs) ( In Rs.)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means

1 over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)

including getting out and disposal of excavated earth lead upto 50 m and lift upto

1.5 m, as directed by Engineer-in-charge.

2.6.1 all kinds of soil 59.76 cum 212.35 12,690.27

Filling available excavated earth (excluding rock) in trenches, plinth, sides of 262.48

2 2.25 foundations etc. in layers not exceeding 20cm in depth: consolidating each

deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shttering - All work up to plinth level

1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 7469.63

4 4.1.4 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete 27.80 Sqm 318.29 8,847.22

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in :

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 9.73 Cum 6881.83 66,960.25

7 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :

Digitally signed by

CHANDRESH KUMAR

Sl. DESCRIPTION OF ITEM QTY UNIT DSR AMOUNT On

No. Rates DSR

1. Earth work in excavation by mechanical

means (Hydraulic excavator) / manual means

over areas (exceeding 30cm in depth. 1.5 m

2.6 in width as well as 10 sqm on plan) including

disposal of excavated earth, lead upto 50m

and lift upto 1.5m, disposed earth to be

levelled and neatly dressed.

2.6.1 all kinds of soil

2 Providing and laying in position cement

concrete of specified grade excluding the cost

of centering and shuttering. All work upto

1:5:10 (1 cement : 5 course bound: 10

4.1.10 graded stone aggregate 40mm nominal size)

3 Providing and laying 60mm thick faciory made

cement concrete interlocking paver block of M

-30 grade made by block making machine

with strong vibratory compaction, of approved

s;ze, design & shape, laid in required colour

16.68 and pattern over and including 50mm thick

compacted bed of coarse sand, filling the

joints with line sand etc. all complete as per

the direction of Engineer-in-charge.

4 Providing and laying at or near ground level

factory made kerb stone of M-25 grade

cement concrete in position to the required

line, level and curvature, jointed with cement

mortar 1:3 (1 cement: 3 coarse sand),

ncluding making joints with or without

grooves (thickness of joints except at sharp

16.69 curve shall not to more than 5mm), including

making drainage opening wherever required

complete etc. as per direction of Engineer-in-

charge (length of finished kerb edging shall be

measured for payment). (Precast C.C. kerb

stone shall be approved by Engineer-in-

5 Painting with synthetic enamel paint of

approved brand and manufacture of required

colour to give an even shade :

Two or more coats on new work over an

13.62.1 under coat of suitable shade with ordinary

paint of approved brand and manufacture

6 Excavating, supplying and filling of local earth

(including royalty) by mechanical transport

upto a lead of 5km also including ramming

2.25a and watering of the earth in layers not

exceeding 20 cm in trenches, plinth,

sides of foundation etc. complete.

7 Filling available excavated earth (excluding

rock) in trenches, plinth, sides of oundations

etc. in layers not exceeding 20cm in depth,

2.25 consolidating each deposited layer by

ramming and watering, lead up to 50 m and

lift upto 1.5 m.

8 Centering and shuttering including strutting,

propping etc. and removal of form for all

a Foundations, footings, bases of columns, etc.

for mass concrete. 25.60 Sqm 318.29 8,148.25

Digitally signed by

CHANDRESH KUMAR

Bill of Quantity for Sound System in MP Hall

Description of Item Qty. Unit Rate Amount

1 Supply, Installation, Testing & Commissioning of Speaker with below

Specifications:-

Transducer Size : 15" LF Driver + 1 x 1" Horn-loaded Compression

Power Handling : 300 Watts Continuous, 1200W Peak

Freq. Range : 75 Hz - 21 kHz

Dispersion : 90 x 40

Sensitivity : 101 dB

Max SPL : 124dB continuous, 130 dB peak

2 Supply, Installation, Testing & Commissioning of Subwoofer with below

Specifications:-

Transducer Size : 18" Low Frequency Driver

Power Handling : 600 Watts Continuous, 2400W Peak

Freq. Range : 45 Hz - 300 kHz

Dispersion : Omni-directional,

Sensitivity : 101 dB

Max SPL : 129dB continuous, 135 dB peak"

3 Supply, Installation, Testing & Commissioning of Class-D Power

below Specifications:-

Number of Channels : 2

Power at 4 Ohms per channel : 1000W

Power at 8 Ohms per channel : 500W

Class-D with LCD Display for critical factors, dual step power factor

built in crossover to set HPF & LPF Filters

4 Supply, Installation, Testing & Commissioning of Software Controlled

Digital DSP with below Specifications:-

Number of Inputs - 4,

Number of Outputs - 8,

Input Impedance - 12kΩ unbalanced, 24 kΩ balanced

Adjustable Delay - 1 second / input & 1 second / output

Supply of Flying bar Indian (Customised) with 1 ton chain pully 2 Nos 18,500.00

4 Supply of Stage Monitor Supply of Stage monitor 2-way, bi-amp. bass

reflex design, 400+100W rms Class D amp., 60Hz-20KHz freq resp, 12"

B&C coax custom woofer, 1" B&C HF driver, DSP 4 presets, 130dB SPL

max, Disp 90°, gas-injection polyprop molded enclosure

5 Supply of Audio mixer 24 mono mic inputs 4 line inputs 66 inputs to

mix 1 ViSi Connect™ option card slot for 64 x 64 input/output

expansion Freely assignable faders and patching Pre/Post selection per

input per bus AES in and out Global mode encoders Soundcraft

FaderGlow™ GEQ on every bus 20 sub-group / aux busses 4 FX busses

8 Matrix busses LR and C Mix busses 4 Stereo Lexicon Effects engines

Delay on inputs and outputs 4 Mute Groups Freely assignable insert

loops Harman HiQnet integration Colour touch screen interface

6 Supply of Corded microphone 2 Nos 9,154.00 18,308.00

7 Supply of Instrument Microphone 2 Nos 9,678.00 19,356.00

8 Supply of Podium Microphone 2 Nos 28,411.00 56,822.00

9 Supply of Microphone Stand Big(GS) 2 Nos 1,124.00 2,248.00

10 Supply of Microphone Stand Small(GS) 2 Nos 843.00 1,686.00

11 Supply of microphone cable from stage to control room for microphone

points with conduit pipe etc. (PLS/Tasker/Krystal) 310 Mtr 131.00 40,610.00

Supply of Speaker 2.5sqmm x3core 195 Mtr 114.00 22,230.00

Digitally signed by

CHANDRESH KUMAR

Description of Item Qty. Unit Rate Amount

13 Supply of microphone connecting box made out from CRC sheet metal

box duly powder coated paint,with 6 nos XLR panel mounting socket &

phono socket having the facility to connect the 6nos microphone

Supply of Professional Head phone 1 Nos 7,127.00 7,127.00

15 Supply of Microphone cable XLR to XLR up to 10 Mtr(PLS) 15 Nos 1,265.00 18,975.00

16 Supply of Microphone cable XLR to XLR up to 15 Mtr(PLS) 15 Nos 1,861.00 27,915.00

17 Supply of Speaker connectin connector & MCB Box for Speaker etc

Installation Job 1 Job 80,000.00 80,000.00

Say Rs. (in Lakh) = 12 Lakh

Digitally signed by

CHANDRESH KUMAR