PROVISION OF CONCERTINA COIL AND BARBED WIRE AND INCINERATOR AND SPECIAL REPAIR TO MAIN GATES, ROAD AND BUILDING NO. P-56 AT NAVAL BASE

Amount

Taking down cement or cement plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc. To receive new plaster complete all as specified and directed

M&L for Rendering 15 mm thick in CM 1:6 on surfaces or surface other than fair face of brick-work or on one side of lathing of stone masionary or concrete surfaces finished even and smooth without using extra cement, Complete all as specified and directed.

M&L for Rendering 15 mm thick in CM 1:4 on surfaces or surface other than fair face of brick-work or on one side of lathing of stone masionary or concrete surfaces finished even and smooth without using extra cement, Complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on ceiling of concrete surface and finishing the surface even and smooth all as specified and directed.

M&L for rendering 20mm thick cement plaster in cement mortar 1:4 on stone Masonary surfaces or surface other than fair face of brick work is to be finished even and smooth w/o using extra cement completed as specified and directed.

M&L for Preparation of old plastered/unplastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying 1 coat of wall care white putty, 1-2mm thick and further applying 2 coats of oil emulsion distemper over a coat of wall priming paint complete all as specified and as directed.

M & L for complete removal of existing treatment on walls and applying 1 coat of wall care putty,2mm thick and further applying two coat of oil bound distemper over one coat of primer paint complete all as specified and directed.

M&L for Preparation of new plastered surfaces in walls soffits, facia roof and applying Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. at any height including necessary scaffolding etc complete all as specified and directed of weather coat primer all as specified.

M&L for Preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of compatible primer complete all as specified and directed.

M&L for preparation of new concrete surface and applying two coats of synthetic enamel paint (ordinary tint) over a coat of primer complete all as specified & directed by Engineer-in-charge.

M&L for two coats of cement base paint including preparation of new plastered surfaces of wall complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing of rubbish complete all as specified and directed.

M & L for Glazed ceramic coloured printed tiles in vertical surface 300x450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile including 15mm thick screed in cm (1:4) as in skirting/dado complete all as specified and directed

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, (300x300mm) in floors etc. set and jointed in neat cement slurry including 20mm thick screed 1:4 as in flooring complete all as specified and directed

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and including 20mm thick screed 1:4 as in flooring complete all as specified and directed.

M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skirting /DADO etc. set and jointed in neat cement slurry including 15mm thick screed 1:4 as in flooring complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar .

M & L Marble work 16 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, skirting and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types, including 20mm thick screed bed in CM 1:4, jointed and pointed with grey cement slurry and pointing with white cement (1:3) using marble dust with admixture of pigment to match with shade cutting and polishing etc complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

Demolition of PCC (unreinforced) in ground floors & pavings n exc 15 cm thickness (below or above ground level)

M&L for 75mm thick PCC 1:3:6 Type D-2 using 40mm graded stone aggregate as in sub bases, plinth protection etc finishing concrete surface even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

Taking down aluminium sliding window /ventilator including glass complete all as specified and directed.

S& F powder coated aluminium frame and shutters for doors, windows, ventilators with one or more rebates including joining cleat and necessary fitting (handle, locking arrangement, stoppage) for fixing etc. complete all as specified.

Taking down wooden chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified

Taking down wooden chowkats or frames exc 1.5sqm but not exc 4sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified

S&F PVC door solid frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails MS frameshall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail and bottom rail on either side and as gap insertfor top rail and bottom rail, panelling of plain of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet beading and joined together with solvent cement supplying l and fixed in the frame at site as per specification and drawing.

S&F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed

S&F 2nd class hardwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats

S&F 35mm thick 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mmB.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Overall length of cover plate 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete all as specified and directed.

S & F of 100 mm long stainless steel butt hinges, medium weight complete all as specified and directed.

S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F Aluminium handles 150mm long anidised aluminium , cast type, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth including knotting and stopping and applying 2 coats of synthetic enamel paint over a prink primer (any tint/Shade) complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified

S&F Hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate with screws 100mm size complete all as specified and directed

S&F for 19/20mm Pre laminated interior grade both sides laminated complete all as specified

S & F Continuous (piano) hinges,Width of flaps (when open) 30 mm mild steel, bright finish or electrogalvanised

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description.

S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified

M&L for framed work such as in doors or gates of angle or other section with gusset plates rails, braces etc. complete drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete Fe 410-W (Gde-E-250) quality-B as specified & directed by Engineer-in-charge.

S&F 5mm thick mild steel plates Fe-410 (Gde E-250) quality-A plain or chequered as in gates, shutters, similar steel structural works complete all as specified and directed

S&F Rolled MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using ERW or induction butt welded tubes confirming to IS 1161- 1979 graded ST 240 complete as specified and directed.

Taking down aluminium decogrill of any size and any type all as specified.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 103 or equivatent 6.5 mm thick all as specified and as directed

S&F 4 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane all as specified and as directed

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed.

S&F in repair 25mm dia Stainless Steel curtain rod etc complete all as specified and directed

S&F in repair statinless steel bracket for curtain rod of 25mm dia for fixing in walls etc complete all as specified and directed.

Demolition and breaking up drain pipes 110/75mm of PVC SWR pipes laid in floor/wall complete all as specified and directed.

S&F of PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of PVC (SWR) bends 110mm dia access to door complete all as specified and directed.

S&F of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal access to door complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm bore PVC SWR pipe single socketed in any length with rubber ring joints laid in in floor/wall complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radious complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal access door complete all as specified and directed.

M&L in 75 mm out let PVC floor trap, plain with openable (two piece type) grating including jointing with solvent cement complete all as specified and directed.

M&L in 125/110 mm PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing of 20 mm bore and connections complete all as specified and directed.

Taking up or down steel tubing of 25 mm bore and connections complete all as specified and directed.

S&F in Unplasticised PVC pipes of pressure rating 10 kgf/cm2 of 25mm dia fixed complete to walls,ceilings or in floors etc pipes incl cutting/chases of walls etc 25mm inclluding fitting (such as elbow tees reducers, couplers short pieces, connection uion etc) whatever required as per manufacturer's instruction fixed on wall /ceiling complete all as specified and directed.

S&F in Unplasticised PVC pipes of pressure rating 10 kgf/cm2 of 20mm dia fixed complete to walls,ceilings or in floors etc pipes incl cutting/chases of walls etc 25mm inclluding fitting (such as elbow tees reducers, couplers short pieces, connection uion etc) whatever required as per manufacturer's instruction fixed on wall /ceiling complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F Toilet paper holder, vitreous China, box type complete all as specified and directed.

S&F in repair 10 Litres, PVC valvless,syphonic action type, flushing cistern, low level, white, with inlet, ball vlave, float and handle including bracket complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm excluding taps, waste coupling and waste pipe.including cutting for and pinning in ends of brackets or recting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&Fin repair grating square 150 mm size of PTMT openable type complete all as specified and directed.

S&F in repair PVC waste pipe suitable for wash hand basin/sink including fixing arrangement complete all as specified and directed.

S&F in repair 32 mm bore waste coupling of PTMT (half of full thread) complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs Fancy type bib taps, long shank chromium plated cast copper alloy 15mm bore with crutch screwed down and fixed complete all as specified and as directed.

S&F in repairs long shank CP Pillar taps 15 mm dia but fancy type, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for pvc pipe and fixed complete all as specified and directed.

S&F in repairs 15mm dia stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch , screwed at both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 120mm dia chromium plated overhead shower with arm complete all as specified and directed.

S & F in repair soap dish, fixed to tiled wall surfaces with plugs and chromium plated brass screws complete all as specified and as directed.

S & F Brass chromium plated tubular towel rod 600mm long complete all as specified and directed.

Dismantling of water storage tank of exc 500 ltrs& n exc 1000 ltrs capacity complete all as specified and directed.

S&F 1000 Ltrs Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 m m - 2 1 0 g m s /25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia etc and making good with any slab and in any position finished the surface even and smooth without using extra cement including necessary form work and welding/binding of reinforcement (including reinforcement) if required complete and match with the existing surface complete all as specified and directed.

Chipping and removal of spalled concrete, cracked, porous and weak concrete up to a depth of the reinforcement rods or depth of carbonation whichever is deeper and cleaning of the reinforcement bars and exposed concrete to remove scales by chipping, wire brushing, emery sheets etc to enable the measurement of reduced dia of the bar, application of zinc primer to the reinforcement on all sides of the reinforcement and application of epoxy bonding agent to exposed old concrete surfaces. The job shall be carried with contractors own pneumatic chipper / manually with all required resources, tools and tackels up to the satisfaction of EIC. payment towards application of zinc primer and epoxy bonding agent shall be paid in respective item rate of contract complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and as directed.

M&L for PCC 1:2:4 Type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges finish surface even and smooth including form work complete all as specified and directed

Dismantling Plain or corrugated steel sheeting, any type / gauge, thickness and any patten of roof coverings, hanger door, hanger roof complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Eng-in-Charge.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410- W(Gde- E-250) quality- B complete all as specified and directed.

Demolition and breaking up drain pipes 300mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar in floors including excavation and removal of soil complete all as specified and directed.

Demolition of stone/boulder masonry, built in cement mortar complete all as specified and directed.

M&L for Concrete bed Type D2 1:4:8 to 200mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed

M&L for reinforced concrete pipe of 200mm bore of pipe, class NP-2, laid and jointed with collars complete all as specified and as directed

M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in manhole cover with plain fair surface including chamfers, weatherings, throatings, necessary form work and set in CM (1:6), placed in position complete all as specified and as directed

M&L for mild steel CRS TMT bars 10 mm dia & over cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (not less than 0.9 mm dia) or securing with clips quality conforming all as specified and as directed.

M&L for mild steel CRS TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for Cutting into existing manholes of 225mm internal dia of pipes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1, smooth finished complete all as specified and as directed

M&L for walling of Porbandar stone masonry well bonded and solidly hearted built in CM 1:6 complete all as specified and as directed

Ditto all as per item No. 108.00 above but except stone complete all as specified and directed.

M & L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed

M&L PCC (1:3:6) type C2 using 40mm graded aggregate as in sub base complete all as specified and directed.

M&L PCC (1:2:4) type B2 using 40mm graded aggregate above sub base complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in copings, benching, and the like including weathering, sightly rounded or chamfered angles and throating complete all as specified and as directed

Earth work in excavation by mechanical means (Hydraulic excavator) / in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated rocks and disposal of surplus excavated soil as directed, within a lead of 50m as directed by Engineer-in-charge

Earth work in excavation by mechanical means (Hydraulic excavator) / in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soils and disposal of surplus excavated soil as directed, within a lead of 50m as directed by Engineer-in-charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soil complete all as specified and as directed

Returning and filling in trenches incl spreading, levelling watering and raming in layer n.exc 25 cm complete all as specified and directed.

Removing excavated soil exc 50m and n.exc 250m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed as in rock complete all as specified and as directed

M&L for RCC M30 design mix (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer -In-Charge.

M&L flat fair finished formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping etc including weathering, slightly rounded or chamfered angles and throating including necessary form work all as specified & directed by Engineer-in-charge.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed by Engineer-in-charge.(each line wire to be measured)

S&F bitumen dip concertina coil punched tape 2.60mm dia high tensile steel spring steel wire dia of coil 610mm, when stretched the length shall be 6m in one coil and tied to barbed wire with and incl provision of steel slips @ 5 clips spiral in one row complete without coating complete all as specified and directed.

M&L for broken glass coping on top of wall in cement mortar 1:3 complete all as specified and directed.

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for Repair to pot holes any depth , not exc 1 sqm each including sweeping free from dust and mud, or water , scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous emulsion SS-1 @ 5kg/10 sqm, putting in premixed bituminous macadam (minimum binder content of 4% by weight of total mix as per design mix) well rammed and sealed with binder 9.80 kg/10 sqm, blinded with 0.09 cum of stone chippings, 6.30mm size and again well rammed (including supply & laying premixed macadam binder and chippings), depth of pot holes n exc 30 mm complete all as per IRC specifications complete all as specified and directed by Engr-in-Charge.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags and mechanical compressor to remove all loose dirts etc and applying evenly a tack coat with bituminous primer at 5Kg per 10 Sqm with paving bitumen complete all as specified and directed by Engr-in-Charge. Paving bitumen VG - 30 grade

M&L for Laying bituminious premix asphaltic semi dense corcrete 40 mm consolidated thickness with 5.5 % binder (As per design mix) content by weight of total mix laid by mechanical paver, rolled and compacted to required camber and gradient complete and rolling to uniform smooth surface with 8 to 10 tonne power road roller complete all as specified and directed by Engr-in-Charge.

M&L for Providing and laying Asphalt painting on B.T. surface with bitumen grade VG-30 at the rate of 5.00 Kg/ 10 Sqm by Mechanical sprayer & spreading the stone dust on prepared surface at the rate of 0.03 cum/ 10 Sqm & rolling with smooth wheel & pneumatic tyred roller & brushing etc complete all as specified and directed by Engr- in-Charge

M&L for Providing and applying minimum 2.0mm thick road marking strips (retro reflective) n exc 10cm wide of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P cleaning the road surface of all dirt, seals, oil grease and foreign material etc complete as per direction of Engineer-in-Charge and accordance with applicable specifications.

S & F in repair PVC Road stud (Cat eye) of size 125 mmx 125 mmx25mm, incluing adhesive solution on the pavement complete all as specified and directed

S&F in repairs 4mm thick ACP panel cladding, fixing on vertical or horizontal MS frame work and filling silicon gel in groves including fixing of Screw gaskets, bolts washers complete all as specified and directed.

S&F in repairs stainless steel letters/ emblem to be fixed in approved design and patterns having letter size not less than 30cm in width 45cm in height , fixing on vertical or horizontal MS frame work and filling silicon gel in grooves and holes including fixing necessary screws and fastening complete all as specified and as directed. Note : MS work will be measured and paid separately.

M&L for even spreading of 25mm thick layer of sand cushioning incl watering & consolidation all as specified & directed by Engineer-in-charge.

M&L for machine pressed precast concrete inter locking paver blocks any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed by Engineer-in-charge.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever reqd complete.

M&L for Firebrick work in linings to fire places, flues, etc. (other than in chimney shafts), set, jointed and pointed in fireclay complete all as specified and directed.

M&L for hard core of gauge exc 63 mm but n.exc 100 mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified and directed.

S&F 250mm dia Flue pipes of mild steel sheet, black, in suitable lengths as approved by the E.I.C. fixed to walls complete all as specified and directed.

S&F Cowls (with 3 stays), riveted to and including 15 cm length of flue pipes, of 250mm dia complete all as specified and directed.

S&F Roof plates with sleeve pieces riveted or welded thereto, and similar roof and ceiling connections for cowls cover complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulaters, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Ditto all as per item No. 144.00 above but for one light point for 2way switch board.

Ditto all as per item No. 144.00 above but for one 5 amps socket outlet on same board board.

Ditto all as per item No. 144.00 above but for One 3 pin socket outlet, 5 Amps,independent borad complete all as specified andas directed.

Ditto all as per item No. 144.00 above but for One 3 pin socket outlet with 2.5 sqmm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Ditto all as per item No. 144.00 above but for or One 3 pin socket outlet with 4 sq mm PVC unseathed (FRLSH) wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge. Note : Seprate circuit of individual point will be drawn from the DB directly for Geyser/washig Machine Point complete all as specified and as directed.

Supply and fix in Repair/Replacement of ceiling rose surface backelite 65x50 mm having 3 terminal complete all as specified and directed..

M&L for taking down and refixing for after Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed.

M&L for taking down and refixing for after Painting of Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed.

M&L for Repair/replacement of Flexi connection pipe accessory 450mm for water heater any type/capacity complete all as specified and directed

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as spcified and as directed

Supply and fix in Repair/Replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and as directed.

Supply and fix in Repair/Replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

Supply and fix in Repair/Replacement of Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engr-in-Charge.

Supply and fix in Repair/Replacement of Lamp 10 Watt LED complete all as specified and as directed by Engr-in-Charge.

Supply and fix in Repair/Replacement of Building street light fitting Endura pearl 20W LED lamp new genaration energy saving & environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP65 protection and impect resistance of IK07,with suitable of GI pipe (light grade) bracket and clamps,nut bolts are fixed on wall/post and all as required and directed. Make : Bajaj cat no BCLST 30W LED I

Supply and fix in Repair/Replacement of Modular switch 1 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

Supply and fix in Repair/Replacement of Modular switch 2 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

Supply and fix in Repair/Replacement of Modular switch 1 way 16 Amps, 1 modules 230 volts Complete all as specified and directed.

Supply and fix in Repair/Replacement of Modular socket 6A, 2/3 pin combined, 2 modules 230 volts complete all as specified and directed.

Supply and fix in Repair/Replacement of Modular socket 6A/16A, 2/3 pin combined, 2 modules 230 volts complee all as specified and directed.

Supply and fix in Repair/Replacement of five step fan Modular regulator 2 module 230 volts complete all as specified and directed.

Supply and fix in Repair/Replacement of MCB DB Single pole and neutral 8 way 240V double door Complete all as specified and as directed.

Supply and fix in Repair/Replacement of MCB DB Single pole and neutral 12 way 240V double door Complete all as specified and as directed.

Supply and fixing in replacement of TP&N distribution board with double door vertical type TPN DB made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating,suitable for MCCB for capacity 100Amp, 16 KA, Incomer 4 ways 415 Volts made up of CRCA sheet with busbar rating 200 Amps Adjustable thermal (70% to 100%) & Fixed magnetic setting type including grouting in the wall, cutting & chasing etc complete all as specified and directed by Engineer - in - Charge.

Supply and fix in Repair/Replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity SP 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engineer - in - Charge.

Supply and fix in Repair/Replacement Supply and fixing SPN 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 2 poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer - in - Charge.

Supply and fix in Repair/Replacement of MCCB 100 Amp 50 Hz, 415 V with rupturing capacity 25 KA for fixed in existing panel & DB complete all as specified and as directed by Engineer - in - Charge.Make - Havells Catpart No. IHLGHF0100# or equivalent to L&T/ Legrand

M&L in Replacement of earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to galvanised earth lead wire 4.0mm dia by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

Supply and lay Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables size 40 mm outer dia laid in trenches/ road/ drain or fixed along wall, poles or laid under floor all as spd and as directed by Engr-In-Charge.

Supply and lay Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS14930 (Part-II) for protection of UG cables size 50 mm outer dia laid in trenches/ road/ drain or fixed along wall, poles or laid under floor all as spd and as directed by Engr-In-Charge.

Supply, laying and testing inreplacement of XLPE cable Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4core complete all as specified and directed.

Supply, laying and testing in Replacement of XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core complete all as specified and as directed.

M&L for Making connection of CPVC pipe distribution branch with GI main of 80/100mm dia size by providing and fixing tee including cutting and making fusion joint etc.

Supply Repair/Replacement Laying and Testing of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fittings and making connection fixed complete to walls, ceilings floors or laid in trenches etc. of 50 mm dia laid in trenches complete all as specified and directed.

Ditto all as per item No. 179.00 above but for 25 mm dia.

Supply and fix in Repair/Replacement of CPVC ball valve valve 50 mm bore complete all as specified and directed.

Supply and fix in Repair/Replacement of CPVC ball valve valve 25 mm bore complete all as specified and directed.

Supply and fix in Repair/Replacement of new generation post top energy saving environmental friendly,long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LED as light sourse Coral (opal) - IP65 suitable for pole dia 76 mm with 25 watt LED lamp complete all as specified and directed by Engineer - in - Charge. Make :- Havells Cat No:-CORALPT25WLED757PSYMTOPC or its equivalent of Bajaj/C&S

Supply and fix in Repair/Repacement of hot press moulded SMC junction box smc base and smc door door fixed with hinge right side sintex box of size 250 x 200 x 100mm Cat No GS-JB-2520 with 6 Amps MCB SP, Bus Bar power connector for RYB-N fixed on epoxy base with the help of MS nuts bolts and MS clamps-2 Nos of size 40mm X 5mm thick .including fixing arrangement on pole complete all as specified and directed.

Supply and fix in Repair/Repacement of Garden Bollard light BGBOM 650 8W LED Bollards lightDie cast aluminium graphite grey powder coated GI Pipe Housing ,Mushroom shape opal acrylic diffuser if fixed in die-cast aluminium base for pleasant light output,LED mounted on die-cast aluminium base,IP-65, 240 Volt,Luminaire is provided with base plate and fixing holes for directely mounting on the concrete pedestal including complete all as specified and as directed. Havells Catpart No. BAMBOOBL8WLED857PSYMTOPCM or its equivalent of Bajaj/C&S/Wipro

VIVEK JITENDRABHAI KATAR (BID ID -3464174)

JAY BHARAT METAL SUPPLIERS (BID ID -3465313)

SANVI ASSOCIATES (BID ID -3468043)

SURESH ELECTRICALS (BID ID -3466188)

m/s prakash enterprise (BID ID -3466868)

K B N TRADERS (BID ID -3467414)