PROVN OF CONSULTANCY FOR STP OF CAPACITY 500 KLD AT SHIVAJI LINE AND NEW MG ROAD POCKETS AYODHYA CANTT UNDER AGE (I) AYODHYA

Amount

Preparation of Detailed Project Report (DPR) including Planning, Survey, Hydraulic design, Preparation of Architectural and Structural Drawings and Bill of Quantities for Sewage Treatment Plant (STP) of suitable capacity (Approximately 500 KLD) to be calculated exactly by consultant as per standard norms, site data and manpower details provided by AGE (I) on FAB / MBBR / Conventional or Modern Green Technology (Like Root Zone Technology etc) fit for discharging into natural streams and / or horticulture use as per latest NGT/ ISI / Pollution Control Board norms and suitable for Military station Ayodhya Cantt consisting of following stages / parameters all as specified and directed by AGE (I):-

Stage 1: Survey, Collection of ground data and submission of alternative proposals within 30 days from the date of award of contract as under:- (a) Survey of Domestic area (Approx 336 Acre) by Total Station and preparation of Master Plan showing the locations of existing Roads, Parks, Accommodations, Sewage / Drainage Network with final disposal point, if any. (b) Preparation of contour map for finalization the location and alignment of sewer lines and STP for preliminary approval showing complete Sewer Network, Flushing Network, Lift Well if required, Sewage Treatment Technology etc.. (c) Recording the location and levels of existing manholes and septic tanks required for design of proposed sewage line and STP. (d) Calculation of sewage quantity based on site survey and population data provided by AGE (I). (e) Collection of raw sewage sample, testing and submission of reports through Govt approved labs for all parameters specified in latest IS codes / National Green Tribunal Act (NGT) / Central Public Health & Environmental Engineering Organisation (CPHEEO) required for design of Sewage lines, STP and its components. (f) Requirement of Area Drainage for lift wells, sewage pumping stations and STP, fire fighting equipments and sign boards etc. (g) Consent to establish and operate the STP from State Polution Control Board (SPCB) and NOC from local authorities for discharge of treated waste water in nallah / drain / river. (h) Presentation in HQ CELZ Lucknow with Contour plan, covering proposal of STP with minimum three alterantive options of technology based on survey, levels and locations, reuse options, tentative location of STP and sewage network for deliberation and approval of one option by CE. (j) The parameter for reuse of treated sewage shall be as per Appx 'D' under Consultancy Services.

Stage 2 : Submission of draft DPR based on approval of finalised option in stage - 1 within 60 days from the date of award of contract all as under:- (a) Design details of capacity of STP, hydraulic design of STP and sewer network including Architectural drawings for issue of tender documents. (b) Design details of Sewage network and sumps if any including drawings. (c) Provn of water table data during peak monsoons will form part of DPR. (d) Vetting of DPR from IIT/NIT/Govt Engineering College. (e) Bill of quantities in AE's form with all supporting details as per MES norms, Specifications and latest SSR / Market Rates as per approved scheme and as directed by AGE (I). (f) Submission of detailed specifications of all items and components of STP and sewage line required for issue of tender.

Stage 3 : Submission of Final DPR after approval of stage - 2 by CE in 05 (five) copies duly hard bind and presentable form within 90 days from the date of award of consultancy contract including the following:- (a) Submission of Structural drawings to E2 (Design) Section of HQ CELZ, Lucknow for approval. (b) Submission of Hard copy of all Architectural and Structural drawings in A2 size in five sets. (c) Bill of quantities in AE form with all supporting details, (d) Hard copy of level sheet with Master Plan and contour plan in A2 size in five sets. (e) SBC Reports for plant from Govt approved agency as required. (f) Technical specifications of all components and items catered in bill of quantities including list of makes (Minimum three makes for each item) required for tender action. (g) Soft copy of all the documents will also be provided to AGE (I) Ayodhya in CD or any other appropriate software (h) The consultant will be responsible to provide consultancy during execution, testing and commissioning of the STPs and will form part of commissioning team. Note:- Terms & Conditions of payment :- (i) 20% after completion of stage -1 (ii) 20% after completion of stage -2 (iii) 50% after completion of stage -3 (iv) 10% after completion and commissioning of STP

PEE Consultants