A/R and M/O of LWSS Binah Ki Ser and its adjoining habitation under GP Tehsil Pachhad Dist Sirmour

Amount

Excavation in foundation & plinth in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth with in all leads, lifts complete in all respects and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:6:12 (1cement:6app.sand:12app.graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Random rubble masonary/polygonal rubble masonary(uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth includingleveling up with cement concrete 1:6:12(1cement :6sand:12 graded stone aggregate 20mm nominal size) at plinth level, in cement mortar 1:6(1cement:6sand)including all leads and lifts and carriage of material at site and as directed by the Engineer Incharge.

Squared rubble masonary coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6(1cement:6app.sand including all leads, lifts and carriage of material at site and as directed by the)Engineer Incharge.

Providing and laying damp proof couse 38mm thick cement concrete 1:2:4(1cement:2app.sand:4app.graded stone agg.12.5mm nominal size and curing complete.I/c all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Applying coat of hot bitumen(mexphlat 80/100 or equipment using 1.70Kg per squaremetre on damp proof, course after cleaning the surface with a cloth lightly sockedin Kerosine oil, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

2nd class brick work using common burnt quality in super structurefloor two level including racking out joints in cement mortar 1:6(1cement :6sand) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing Angle Iron in frames and door , windows clerestory windows and other frames wrought framed and fixed in position , including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30X30X5mm . So as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads, lifts for insitu-reinforced concrete and plain concrete work in, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

a)Flat surface such as soffits of suspended floors, roofs,landings and the like floors etc.in all thickness.

Providing and laying reinforced cement concrete work 1:2:4(1cement:2app.sand:4app. graded stone aggregate 20mm nominal size and curing complete excluding cost of form work and reinforcement for RCC work in suspended floors roofs,landings shelves and their supports balconies beams,girders bressumers andcantilevers upto floor two level in all height and depth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing tor steel reinforcement for RCC work including banding, binding and placingin polsition complete upto floor two lelvel including all leads, and carriage ofmaterial at site and as directed by the Engineer Incharge.including cost of binding wires.

Providing and fixing MS grills of required pattern in wooden frames/pressed ,steel framewith MS flat square/round bars 12mm dia with round headed bolts and nuts or byscrews. Plain Grill, including all leads, lifts and carriage of material at site and asdirected by the Engineer Incharge.

Providingand fixing 1mm thick MS sheet garrage door with framed of 40mmx40mmx6mm angle irion 3.15mm , MS gusset plates at the juctions and corners, all necessaryfittings complete, including applying a priming coat of red lead paint using flat30mmx6mm for diagonal braces andcentral cross pieces including all leads, lfits andcarriage of material at site and as directed by the Enginer Incharge.

Applying priming coat over new steel and steel based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting: ready mixed paint brushing stell primer oxide paint ,including all leads, leads, and carriage of material at site and as directed by the Engineer Incharge.

Painting two coats(excluding priming coat) on new steel and steel based surfaceswith enamel paint to give an even shade including cleaning the surface of all dirt dust and other foreign matter, sand papering and knotting ready mixed paint other than white , including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Boulder filling under floor hand packed tightly , including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Cement concrete flooring 1:2:4(1cement:2app.sand:4app.graded stonaggregate 20 mm nominal size) laid in one layer finished with floating coate of neat cement 40mm thick including all lead, lifts and arriage of material at siteand as directed by the Engineer Incharge

15mm cement plaster in single coat on rough side of brick /stone masonary for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80-mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6app.sand) including all leads,lifts and carriage of material at site and as directed by the Engineer Incharge.

6mm cement plaster in ceiling in cement mortar 1:3(1cement:3sand) including allleads lifts and carriage of material at site and as directed by the Engineer Incharge.

White washing with lime on undecorated wall surfaces(two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter.including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Distempering (two coat) with oil bound washable distemper of approved brand and manufacture and of required shade. On decorated wall surface to give an even shade after throughly brushing the surface clean of all grease,dirt, like pieces of scales and also including preparing the surface even andsand papered smooth.including all leads, lifts and carriage of materialat site and as directed by the Engineer Incharge.

Providing under layer for plinth protection of 75mm thick (un consolidated ) bed of dry brick/stone 40mm nominal isze well rammed and consolidating and with fine sand including preparation of ground , including all leads, lifts and carriagegrouted of material at site and as directed by the Engineer Incharge.

Providing plinth protection 50mm in cement concrete 1:3:6)1cement:3sand:6graded stone agg.20mm nominal size) including finishing the top surface of concrete smooth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing stone Kharanja drain 45cm wide including 25 cm stone laid in cement mortar 1:6 (1 cement 6 sand ) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing oxidized MS sliding door bolts with nuts and screws completeincluding all leads, lifts and carriage of material at site and as directed by theEngineer Incharge

Providing and fixing aluminium tower bolts (Barrel type) with necessary screws completeincluding all leads, lifts and carriage of material at site and as directed by the.Engineer Incharge.

Providing and fixing aluminium handles with necessary screws at complete,including all leads, lifts and carriage of material at site and as directed by theEngineer Incharge.

100mm dia

Providing and fixing electrical fitting in Pump house including all leads, lifts and carriage of material at site and as directed by theEngineer Incharge.

deepak

RAVI DUTT CONTRACTOR