Health Grant 2024-25, Pr.No.187/25-Chowannur BP -Additional facilities in Public health unit at CHC Pazhanji, Kattakkambal GP - 2nd stage

Amount

Additional work

15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD512657/2024-2025:Supplying and fixing at site Aluminium Composite Panels (ACP) of approved make and colour certified for exterior applications, 3mm thickness with 18 to 30mm microns PVDF coating confirming to ASTM standard with top aluminium skin of 0.25mm and with a bottom aluminium skin of 0.25mm with service coating of polyster paint, laminated to a centre core of 2.55 single recycled low density poluthelene material. The panels shall be cut to sizes of required grid dimensions (minimum grid size 450*450mm) with the site condition. The panel shall be fixed on pre-fabricated frame work using 35*25*1mm thick aluminium extruded sections of approved make joined with standard cleats and fasteners. The gaps fomed between the panels shall be sealed with silicone sealant. Hinges for openings shall provide separately if needed. The rate inclusive of cost and conveyance of all materials labour for errection, hire charges of scaffolding etc:- complete

OD26590/2024-2025:Supplying and fixing of stainless steel projected English Letters 7" height and in proportionate width including polishing and all fitting charges

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD513149/2024-2025:G.I. hard colour powder coated trafford sheets .35mm thick of available thickness with overlap of 150 mm at endsand GI hook or crank GI bolts &amp nuts including plain washers and bitumen washers etc complete

OD513553/2024-2025:Supplying and fixing 110mm half cut section with brackets at the end of sheet or tiled roof for rain water collection including all cost and conveyance

51.18.12.5:Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) <br> External work - 40 mm nominal dia

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD513104/2024-2025:Providing and laying Anti skid floor tiles 300x300 mm ( thickness to be specified by the manufacture) of 1st quality , laid on 20 mm thick Cement mortar 1 :4(1 cement : 4 course sand ) including pointing the joints with white cement and matching pigment etc,complete

P C Devassy (BID ID -2180862)

Bidder Name

P C Devassy

edakkalathur construction