CERTAIN REPAIRS TO STORM WATER DRAINS, ASSOCIATED WORKS IN ZONE-I AND DOMESTIC AREA AT TBRL RANGE RAMGARH

Amount

Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL.

Demolition of reinforced cement concrete slabs etc in ground floor and paving n.exc 15 cm thick (below or above ground level)

Demolition Cement Concrete of any description and in any position complete all as specified and directed

Excavation over area n.exc 1.5m deep and getting out in hard/dense soil.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils.

Removing excavated material exc. 250mtrs but n exc 500 mtr and depositing where directed at a level not exc. 1.50mtrs above the starting point.

Material and labour PCC (1:4:8) type D2 using 40mm graded aggregate in sub base/ mass concrete.

Material and labour brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed

All as per serial item No 9.00 above but except brick complete all as directed

Material and labour for rendering 15mm thick on fair faces of concrete surfaces in CM (1:4) using WPC @ 3% by weight of cement. Note : WPC shall be measured and paid separately.

Supply only water proofing compound conforming to IS-2645 1975.

Material and labour for PCC type 1:3:6 type B1 20 mm gradded aggregate as in surface channels and drains complete all as specified

Material and labour for PCC (1:2:4) type B0 using 20 mm graded agg as in coping etc inclduing necessary form work

Material and labour for PCC (1:2:4)) type B1 using 40 mm graded agg as in benching etc.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends.

All as per serial item No 15.00 above but add or deduct for each 25mm girth or part thereof over or under 30 cm

Material and labour for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slabs etc set in cement mortar (1:4) including use and waste of form work & placing on drains complete directed

Material and labour for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia conforming to Fe-410-S or Fe-410-O complete.

All as per serial item No 17.00 above but 8mm dia TMT bars

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in road cutting areas etc all as directed.

Material and labour for Reinforcement concrete pipes, class NP-2 laid and jointed complete with collars for 450 mm bore dia of pipe.

Material and labour for providing 100 mm thick PCC 1:2:4 Type B-2 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2(using 40mm graded aggregate) as in plinth protection fixed even and smooth with out using extra cement

Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises.

Material and labour for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over a layer of fine river sand, watering and consolidating complete . (Note: Sand will be measured paid for seperately under respective item supplied only).

Supply only river bed fine sand for screed bed min 25mm thick for paving flooring

Material and labour for PCC chequered tiles with grey cement and pigment 25cm X 25cm X 25mm thick set & jointed in neat cement slurry as in path, pavement, floors, etc. over 20mm thick screeding of CM 1:6 all as specified and directed.

Material and labour for filleting work in CM 1:4 not exc 25 Sqcm

Cleaning and clearing of any type of drain any width or depth including covered drain by taking off draincovers and re-fixing the same after cleaning all as specified and directed.

VARUN TRADERS

M/s Krishan Aggarwal

KUKREJA ENGINEERS

shree balaji builders

ALPHA ENGINEERS AND BUILDERS