Electrical lighting arrangement

Amount

Supply, Installation, testing & Commissioning of Floor Mounted Cubical type, Front & back opened, Compartmentalized LT Panel made by3mm CRCA Sheet With powder coated paint, cable alley with connector at both side, hinged type door arrangement at front & back side with interconnection by suitable size copper wire as per direction of EIC comprising the following :- (Make - L&T / Legrand / Seimens) (i) 415V, 63A, TPN,SFU - 1 No. (ii) 415V, 32A, TPN,SFU - 4 Nos. (iii) 415V, 32A, 4 Pole Contractor (Make- L&T, MCX Cat. No- CS97011)- 4 Nos.

Supply, Installation, of Kiosk Box of Size 900mm X 500mm X 1600mm (3'X1'-8"X5'-2") made by 3mm CRCA sheet with hinged type front open door and locking arrangement to rest on the structure made by 40 X 40 X 6mm size angle iron frame incl. fixing the LT Panel in Kiosk box with all required materials. Top of the Kiosk Box should be slamting roof made from 14 SWG CRCA sheet incl. painting the Kiosk box (Inside & outside) by Powder coated anticorrosive paint. Errection of above Kiosk box on brick foundation of size 1200mm X 750mm X 300mm depth incl. plastering & neat cement finish as per direction of EIC.

S & F 1 Ft X 1 Ft. X 1 / 2 inch thick hylem sheet best quality on wall by 4 Nos. 4 inch X 1 / 2 inch nut, bolt with washer icl. S&F 3 Nos. 500V, 63A Fuse base and bridge ( Make- EPC) by nut bolt after drilling hole as per direction of E.I.C.

OCTAGONAL POLE FOR PATH LIGHTING. Supply and installation of 7 Mtr GI Octagonal Pole as per dimension-Top dia -70 mm, Bottom Dia - 130 mm, Section-1 (Section Length - 7000 mm) Thick-3mm.Base Plate - 225 mm x 225 mm x 16 mm, PCD - 225 mm, FOUNDATION ACCESSORIES - Foundation Bolt- M20 x 700 mm.(4Nos.), Sword Type Single Arm Bracket 1500 mm Long, templates and Foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1400 mm with 8 nos. 12mm dia.

tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing. This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground / driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Excavation, RCC and reinforcement shall have to be as per direction of EIC.

The pole should have in built 2 pole and earth terminal for power distribution arrangment. (Material for Pole Shaft- As per BSEN 10025 / IS 5986 Grade or Equivalent / Material for Base Plate - As per IS 2062 Grade - Fe 410 / Metal protection - Hot Dip Galvanisation as per IS 4759 or equivalent) (Make: Utkorsh / Bansal / Skipper / Bajaj / Surya / CG)

Errection of Octagonal Pole by designing and casting RCC foundation of suitable size as specified below considering the safe soil bearing capacity at site incl. excavation of earth. Providing cutting, bending and placing in position reinforcement as per drawing and cleaning extra earth- 7 Mtr. Long [ foundation Size- 500 X 500 X 1200mm, J Bolt Size- M-20X600)

Errection of Octagonal Pole on Bridge with necessary arrangements & as per direction of EIC.

SITC of Single deep galvanized steel overhang bracket ( Swan Neck Type ) at different height of the pole as per direction of EIC. The bracket should be having 1.5 Mtr. Length complete with all fixing arrangements as required incl. painting.

(i) Single Swan Neck Arm Bracket.

S & F of Vibration Damper to be fixed in between pole and fittings as per direction of EIC.

Fixing only outdoor / street light type fluorescent light fitting complete with all accessories to be fixed / projected from the wall of the building incl. making holes to building, S&F 40 mm dia GI pipe (ISI-Medium) 1.50 mts. average length, with GI socket at one end and thread at the other end & suitable bend to house the fitting & making necy. connections with S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall and painting.

S & F 230V, 140-160W LED Street light with aluminum die cast housing having at least IP66 protection with individual optics of LED Colour (warm white) - CDL minimum lumen out put 120 lumen / watt on existing pole arm. [Make - Philips - BRP 360 LED 155watt 3000K WW or equivalent make].

Supplying & Fixing CI waterproof type looping cable box size 250 x 250 x 100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, 4- Nos. PVC COnnector, one NL on porcelain insulator, one compression type brass cable gland for upto 4- core 25 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, flushed in wall including painting with anticorrosive paint.

Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level incl. (G-1/2)

Excavation of soil ( Soft Soil) for installation of Earth Electrode and filling & ramming. ( G-1/1)

Connecting the equipments body to earth busbar including S & F 20 mm x 3 mm galvanized (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. (G-3/5 ( C))

Supply of following size 1.1KV, Armoured PVC / Al. Cable. (Make- Polycab / KEI / Havells).

(i) 4 Core 35 sq. mm. PVC / Al. Armoured Cable.

(ii) 4 Core 16 sq. mm. PVC / Al. Armoured Cable.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of following size XLPE/PVC armoured cables.

(i) 4 Core 35 sq. mm. PVC/Al. Armoured Cable.

(ii) 4 Core 16 sq. mm. PVC/Al. Armoured Cable.

Finishing the end of following sizes XLPE/PVC armoured cables by crimping method incl. supplying and fixing solder less socket (Dowels make), tapes, anticorrosive paste & jointing materials.

(i) 4 Core 35 sq. mm. PVC/Al. Armoured Cable.

(ii) 4 Core 16 sq. mm. PVC/Al. Armoured Cable.

Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable up to 50 sq. mm. , on existing Cable Tray and binding with suitable size GI wire.

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles making holes etc. as necy. mending good damages and painting.

S/F the G.I. Pipe 40 mm dia ISI-M for protection purpose as per direction of EIC.

BISPA INDIA

PANDIT AND CO