FURNITURE WORK OF HEALTH CENTER AND READING ROOM AT MOJE PASODARA, R.S.NO.173 AND 174/002 AMENITIES SPACE IN NEW EAST ZONE (SARTHANA)

SR.NO. ITEM QUANTIY UNIT AMOUNT

1 WOODEN PARTITION 2.37 3,669.58 Sq. Mt

Providing and fixing of full height solid sandwitch partitions (AS PER DRAWINGS) using

50 x 50 mm aluminium pipe for framing (minimum grid size of 600 mmx 600mm ), 12mm

ply (both sides)of brand greenply ecotech mr,century sainik mr,srg etc, teak wood beading

patti etc. making of rebates and including all hardware items, groove (if shown)50 MM TK

, 24 kg density insulation if required,with all materials,hardwares,ss or powdercoated

screws, labour, lead and wastage,scaffolding etc. complete. And Finished with different

materials,and complete the work satisfactorily as per instruction of architect or Engineer-

2 ABOVE CEILING PARTITION 18.71 1,503.83 Sq. Mt

Providing and fixing of above ceiling partitions (AS PER DRAWINGS) using 75 mm x

mm x 1 mm aluminium pipe for framing,with ghana wood infill etc. including all hardware

item, with all material, labour, lead,scaffolding and wastage etc. and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.

3 GLASS PARTITION WITH FILMWORK 1.00 4,756.14 Sq. Mt

Providing and fixing of full height glass partitions (AS PER DRAWINGS) using patch fitting

/ U-channels, 12mm clear toughned glass,film work as per drawing including all

hardware items,silicon,etc with all material, labour,cutouts,edge polish , lead and wastage

etc. and complete the work satisfactorily as per instruction of architect or Engineer-in

4 MIRROR FINISH(5mm thick Looking Mirror) 27.27 2,565.97 Sq. Mt

Providing and fitting of mirror/glass (as per drawing & approved shade)of brand

ais,modiguard,etc on ply panelling / on tile cladding including all material, labour and

hardware, cutouts, edge polishes,waste of materials and complete the work satisfactorily

as per instruction of architect or Engineer-in charge.

5 WOODEN PANELLING 69.88 1,748.14 Sq. Mt

Providing and making of ply panelling on Wall & columns using 12mm ply, aluminium

pipe for (2" x 1") framing(minimum grid size of 600 mmx 600mm ), Ghana bidding patti

(11/2" x 3/4")including all material, labour and hardware complete,including scaffolding

as per instruction of architect. And Finished with different materials,polish work as per

instructions,and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.

6 LAMINATE FINISH 103.06 1,190.98 Sq. Mt

Providing and fitting of 1 mm laminate (as per drawing & selection) of brand

greenlam,merinolam,century etc on ply partition with 25 mm x 20 mm teakwood beading

patti design on top as per drawing,and 3mm x 3mm grooves if shown, all material,

adhesives,polish work,labour and hardware, waste of materials,polish work as per

instructions, complete as per instruction of architect.[Basic Rate of Laminate :

2000rs./sheet (8' x 4')] and complete the work satisfactorily as per instruction of architect

or Engineer-in charge.

7 ACOUSTICAL PANEL FINISH 34.44 4,407.47 Sq. Mt

Providing and fitting of acoustic panels with Standard size & thickness of

1220*2420*9mm.of brand Artois,smart pannel,senses akustik,trnaquil ,only.IN

GRADIENT PATTERN,including synth pf of 24kg density,Panels should have Sound

Absorption coefficient (NRC) 0.84. Formaldehyde emission standards of GB18580-

2001 class E1, it should be a green material with asbestos-free, non-toxic and tasteless gas

under extreme temperature, protecting the ozone layer, non-irritant and recyclable.

acoustic panels have to be Fire-resistant as per China standard class B1. Good insulation

properties, to prevent transmitting the heat from outdoor to indoor directly as partition or

and ceiling, saving 35% of energy, extending the life of air conditioning.including all

acceessories, material,cutting work of approved finishing,adhesives,paint work , labour

etc. and complete the work satisfactorily as per instruction of architect or Engineer-in

charge.(Basic rate of PANNEL-160 rs/sq.ft.)

8 GYPSUM CEILING 98.80 958.58 Sq. Mt

Supplying and Fixing of Suspended ceiling system components which includes Single

Layer Boarding with 12.5mm thick USG Boral Standard Plasterboard This includes of USG

9 WOODEN CEILING 27.52 2,818.42 Sq. Mt

Providing and fixing of wooden ceiling using 12 mm ply of brand greenply ecotech

mr,century sainik mr,srg etc, , aluminium channel & pipe(50 x 25 mm) for framing and

suspension, screws etc. including all vertical support and all vertical surfaces from

ceiling,necessary hardwares,75mm anchor fastners and complete with all material,

making of coves and cutouts for ac grills ,labour & scaffolding with all lead, lift and

transport. and finished and complete the work satisfactorily as per instruction of architect

or Engineer-in charge.

10 CEMENT SHEET CEILING 59.60 2,853.80 Sq. Mt

Providing and fixing of cement ceiling using 10 mm cement sheet of brand T.P.I,SHERA

(single sides), etc. using aluminium framing of 25mm x 50mm x 1 mm in 600 x 600 mm

grid,and same pipe for vertical framing, including all hardware item, aluminium L clits,

mm powder coated self drilling screws,groove (if shown) with all material, 75 mm anchor

fastners,making of coves for indirect lighting, grooves,cutting ,labour,SCAFFOLDING, lead

and wastage etc. complete. And Finished with satin finish wall color and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

11 SOLID DOORS FOR WOODEN PARTITION(75 MM TK) 4.30 5,249.88 Sq. Mt

SR.NO. ITEM QUANTIY UNIT AMOUNT

Providing and fixing of 75 mm solid doors (AS PER DRAWINGS) using 50 x 50 mm

aluminium pipe for framing, 12mm ply (both sides)of brand greenply ecotech mr,century

sainik mr,srg etc, including glass slit as per drawing 50 mm teak wood beading patti at the

framing etc. making of rebates and including all hardware items,mortise door lock (ENOX

EMH-SS-019)with entire set including cylinder,heavy duty conceal door closer of brand

enox (ENOX ITS-3870-EN 2-5),ozone,dorma,and groove (if shown) with all materials,

labour, lead and wastage,polish work as per instructions etc. complete. And Finished with

different materials,and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.

12 CARPET FLOORING(LOOP PILE) 77.54 1,883.10 Sq. Mt

Providing and fixing of approved quality Carpet tile of brand Toli Yutaka,including all

acceessories, material, labour etc. complete. (Basic rate of Carpet- 150 rs/sq.ft.)Surface

should be BCF Nylon 6.6 with Stain Release. Base fabric should be nonwoven polyester

with glass fibre and pvc backing. Size of tile should be 500mm x 500 mm x 6mm with a

pile height of 3 mm. Area of use shall be heavy commercial. CRI Green Label Plus

Certification is GLP9978. Performance specifications include smoke density of less than

450 (ASTM E662), Electrostatic Propensity of 1.1kv (AATCC 134), Surface Flammability

passes CPSC FF 1-70 (ASTM D2859), Dimensional Stability as per ASTM D 7570 and

delamination strength exceeds backing strength.(Basic rate of CARPET-155

rs/sq.ft.)installation , adhesives,primer work,etc, as per instruction of Architect or

Engineer-in charge.

13 WALL COLOR - SATIN 10.00 282.80 Sq. Mt

Providing and applying satin paint of approved quality, company and shade upto finishing

(min 3 coats) including lappi and primer work and all material, labour including

scaffolding etc. and complete the work satisfactorily as per instruction of architect or

Engineer-in charge. (Basic rate of Luster paint- 24 rs/sq.ft.)

14 PLASTIC PAINT 158.40 178.06 Sq. Mt

Providing and applying plastic paint of approved quality, company and shade upto

finishing (min 3 coats) including all material, labour including scaffolding etc. and

complete the work satisfactorily as per instruction of architect or Engineer-in charge.

(Basic rate of plastic paint- 12 rs/sq.ft.)

15 S.S 304 GRADE DUSTBIN 6.00 1,656.40 No.

Providing & Supplying of S.S 304 GRADE . Dustbin of brand SATYAKI,pigeon etc,having

size of 10 In. Diameter & 14" Height etc. complete as per selection & directed by the

Architect and approved by the Engineer in Charge.(BASIC RATE OF DUSTBIN IS RS 1550/-

16 POP PUNNING 10.00 273.31 Sq. Mt

Providing and fixing of POP Punning and finished by company approved gypsum, taping,

lapi, including scaffolding etc. and including grooves as shown in drawing And including

satin paint complete with all material, labour with all lead, lift and transport.and complete

the work satisfactorily as per instruction of architect or Engineer-in charge.

17 MEETING ROOM TABLE (9.5X 1.8) 1.00 4,41,361.85 No.

Providing and fixing of MINI -CONFERENCE ROOM table including side storage as per

drawings and instructions provided, using ply of brand greenply ecotech mr, century

sainik mr, srg etc., aluminium pipe for framing and finishing it with 12 or 6 MM CORIAN

work including all cnc work of brand granium,Tranquil,dupont ,and 1mm unicore laminate

and 1mm laminate of brand greenlam or selected by the architect (basic rate of unicore

laminate is 3000 per sheet and other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0)

including all material, installation,m.s fabrication work with powder coating, glass work as

per design,labour and hardware, waste of materials,polish work as per instructions etc.

and complete the work satisfactorily as per instruction of Architect or Engineer-in charge.

(APPROX RUNNING LENGTH OF TABLE IS UP TO 9.53 MT.)

Providing and fixing of 10 mm clear Acrylic cut work and fixing 3mm acrylic on top of

brand Ptglass,astari etc,3M vinyl with 5 years warranty on fading with all laser and cnc

work,including all material, labour,25 mm ss studs for mounting and other hardwares,

waste of materials etc and complete the work satisfactorily as per instruction of architect

or Engineer-in charge.

19 ROLLER CURTAIN 28.80 2,507.05 Sq. Mt

Providing and fixing of approved quality roller blinds using phifer fabric of premium

grade, with roller tube, bottom bar leveller made of extruded aluminium alloy an Idler,

Insert Type- Brackets, PVC chain etc. all complete at all floor and heights as per approved

specification. Roller Tube Control, Clutch, Idler Side by side or single Roller Tube of

extruded Aluminium 38mm inner dia - 41mm outer dia minimum wall thickness of

Roller blind - roller blind fabric should be made up of 35% FibreGlass, 65% PVC, it should

have specific low emissivity treatment and lead free with Greenguard gold certification. It

should have 3% to 5% openness, fabric thickness should be 0.43 mm, mesh weight

approx 400 gms/ sqmtr. It should cut UV rays, with antimicrobial properties preferably

with Microban. The fabirc should be Flame retardant and Lead Free. It should be

GreenGuard certified with Gold Standard for low chemical emissions for indoor use. (Basic

rate of Roller blinds- 85 rs/sq.ft.)including all accessories, material, labour,installation

etc..and complete the work satisfactorily as per instruction of architect or Engineer-in

20 WOODEN BLINDS 8.00 6,267.62 Sq. Mt

Providing and fixing of approved quality wooden vanishing blinds 50 mm wide slit of

brand signature -essential series, with easy lift cord/chain operation, including all

acceessories, material, labour,installation etc.. (Basic rate of wooden blinds-

rs/sq.ft.)and complete the work satisfactorily as per instruction of architect or Engineer-in

21 HOSPITAL CURTAIN 69.23 1919.00 Sq. Mt

SR.NO. ITEM QUANTIY UNIT AMOUNT

Providing and fixing of approved quality Privacy Curtain - Machine Washable, Anti-

Bacterial, Inherently Flame Retardant.The fabric used for these Professional Cubicle

Curtains are 100% polyester an is AUTHENTICALLY flame-retardant that complies with

NFPA 701 fire code, to be installed on existing track's with Mesh top and Grommets with

track,channels ,hook and hanger including all acceessories, material, labour,installation

etc. and complete the work satisfactorily as per instruction of architect or Engineer-in

22 STORAGE UNIT WITH LAMINATE FINISH 57.44 12,682.38 Sq. Mt

Providing and Making of Storages (AS PER DRAWINGS) using ply of brand of brand

greenply ecotech mr,century sainik mr,srg etc,(thickness as specified)/ sag wood and

finished by 1 mm Laminate outside as per selection of brand greenlam,merinolam,formica

or 6mm HDF as per drawing, 1mm tk laminate (inside),water pu polish (as shown),

drawers, shelves etc. with all hardware, nylon leveler foot rubber, handles,hinges, locks

magnet and other acessories with all material, installation,labour, lead and wastage,polish

work as per instructions etc. and complete the work satisfactorily as per instruction of

architect or Engineer-in charge.(Basic rate of Inside Laminate : 18 rs./sq.ft. & Outside

Laminate : 53 rs./sq.ft.)

23 BED WITH BELOW STORAGE (2.10X0.90X0.90) 13.23 31,748.64 Sq. Mt

Providing and Making of BED WITH BELOW STORAGE AND 4" THICK MATTRESS (AS PER

DRAWINGS) using ply of brand of brand greenply ecotech mr,century sainik mr,srg

etc,(thickness as specified)/ sag wood and finished by 1 mm Laminate outside as per

selection of brand greenlam,merinolam,formica or 6mm HDF as per drawing, 1mm tk

laminate (inside),water pu polish (as shown),miniumn 4 to 5 drawers, shelves and

shutter with exterior laminate etc. with all hardware, nylon leveler foot rubber,

handles,hinges, locks , magnet and other acessories with all material, installation,labour,

lead and wastage,polish work as per instructions etc. and complete the work satisfactorily

as per instruction of architect or Engineer-in charge.(Basic rate of Inside Laminate :

rs./sq.ft. & Outside Laminate : 53 rs./sq.ft.)

24 GANG CHAIR - 2 SEATER 4.00 12,625.00 No.

Providing and fixing 2-seater gang sitter with moulded foam, with Aluminium casting and

metal waterfall seats, PU 10mm thick pads on seat & back (chargeable), P.C. frame & with

perforation. as per architects selection,and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.BRANDS : COHUMAN , FEATERLITE

HAYWORTH(BASIC RATE OF GANG CHAIR 10000)

25 GANG CHAIR - 3 SEATER 12.00 16,665.00 No.

Providing and fixing 3-seater gang sitter with moulded foam, with Aluminium casting and

metal waterfall seats, PU 10mm thick pads on seat & back (chargeable), P.C. frame & with

perforation. as per architects selection,and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.BRANDS : COHUMAN , FEATERLITE

HAYWORTH(BASIC RATE OF GANG CHAIR 14000)

Providing and fixing corner table of brand as per architects selection,and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.(basic rate per

piece is 7000/-)

27 WALLPAPER 1.00 2,070.50 SQ MT.

Providing & Supplying of WALLPAPER as per selection of approved brand selected by the

architect and complete as per selection & directed by the Architect and approved by the

Engineer in Charge.basic rate of wall paper is 125 / sq ft

28 SINGLE BAY TABLE WITH OUT MODESTY PANNEL (1.20 mt x 0.60 mt) 23.00 33,330.00 No.

Providing and fixing of single bay office table of size 1.20 x 0.60 mt and side storage with

drawers and shutters of width 0.45 mt as per drawings,modesty pannel and instructions

provided,using ply of brand greenply ecotech mr,century sainik mr,srg etc,or aluminium

pipe for framing and finishing it with 1 mm unicore laminate and 1mm laminate of brand

greenlam or selected by the architect(basic rate of unicore laminate is 3000 per sheet and

other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0)including all material,

installation,m.s fabrication work with powder coating,labour and hardware,drawer

channels,hinges,handles,keyboard trolley,cpu trolley,cable manager,cable trunking system

etc waste of materials,polish work as per instructions etc and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.BRANDS

:UNIMAPLE,FEATHERLITE,COHUMAN.

29 "L" TYPE TABLE FOR STAFF (1.80 mt X 0.60 mt ) 4.00 45,450.00 No.

Providing and fixing of L-TYPE office table of size 1.80 x 0.60 mt and side storage with

drawers and shutters of width 0.60 mt as per drawings,modesty pannel, and instructions

provided,using ply of brand greenply ecotech mr,century sainik mr,srg etc,or aluminium

pipe for framing and finishing it with 1 mm unicore laminate and 1mm laminate of brand

greenlam or selected by the architect(basic rate of unicore laminate is 3000 per sheet and

other 1mm laminate is 2000 per sheet, of size 8'0 x 4'0)including all material, installation,

m.s fabrication work with powder coating with powder coating,labour and

hardware,drawer channels, nylon leveler foot rubber,hinges,handles,keyboard trolley,cpu

trolley,cable manager,cable trunking system etc,, waste of materials,polish work as per

instructions etc and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.BRANDS :,UNIMAPLE,FEATHERLITE,COHUMAN.

30 HIGH BACK CHAIR-TYPE A (ALL CABIN & MEETING HALL) 6.00 10,100.00 No.

SR.NO. ITEM QUANTIY UNIT AMOUNT

Providing and fixing of high back office chair, with bifma class IV gas lift. Zen HB Chair, G.F.

Nylon structure with wire mesh on back high density cushion on seat adjustable arms

with PU pads synchro tilt with multi locking mechanism and seat slider gaslift for height

adjustment prong aluminium base with 60 mm castors. as per selection and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.Basic rate of chair

is 7790/- per chair. BRANDS : Zen,COHUMAN, BRISTOL, COMO.

31 MID BACK CHAIR-TYPE D( STAFF & MEETING HALL ) 31.00 4,040.00 No.

Providing and fixing of mid back office chair of good quality Curved fiber and nylon body

with adjustable lumber support, Reinforced mesh & knee tilting mechanism, 4 way

adjustable arms, 5 prong nylon base as per selection and complete the work satisfactorily

as per instruction of architect or Engineer-in charge.Basic rate of chair is 2975/- per chair

BRANDS : BRISTOL, COHUMAN STORM FIX CHAIR

32 PLASTIC CHAIR WITH CUSIONING FOR ALL VISITOR 46.00 2,525.00 No.

Providing and sulppying plastic chair with cusining of High-grade 100 percent virgin

polymers which ensure its longevity,Ergonomically designed plastic chair for home with a

lacquered finish, heavy-duty armrest, back and seat cushion made up of velvet upholstery

and PU material for maximum comfort as per selection and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.Basic rate of chair is

2200/- per chair BRANDS :Supreme Ornate

33 METAL RACKS 72.00 4,545.00 NO.

Providing and fixing of storage rack of angle slotted type of size 2000 x 36”900 x 18”

with 6 shelfs(20 swg) ,including all hardware,colours,powder coating, channels, etc.and

complete the work satisfactorily as per instruction of architect or Engineer-in charge.

34 STOOL CHAIR 22.00 2,222.00 No.

Providing and supplying stool chairs of stainless steel with height adjustable seating

option for doctors and patients

per selection and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.Basic rate of chair is 2000/- per chair

Providing and fixing of painting as per selection and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.Basic rate of chair is 3000/- per painting

Providing and fixing of painting as per selection and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.Basic rate of chair is 4500/- per painting

37 PLANTER WITH REAL PLANTS 10.00 3,535.00 No.

Providing and fixing 13 inch dia planter/pots of frp or plastic including drain tray with

real indoor plants as per selection,including 3 feet ht plants of brand seasonal dekor or as

per selection and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.(BASIC RATE OF POT IS RS 1880/-)

38 PLANTER WITH ARTIFICIAL PLANTS 10.00 7,575.00 No.

Providing and fixing of 22 inch dia planter/pots of roto moulded plastic with artificial

indoor plants as per selection and including artificial plants of 4 feet ht of brand seasonal

dekor or as per selection,complete the work satisfactorily as per instruction of architect or

Engineer-in charge.(BASIC RATE OF ARTIFICIAL PLANTER IS RS 3500/- AND POT IS RS

39 WALL CLOCK 15.00 1,262.50 No.

Providing and fixing of 12 to 16 inch dia wallclocks of brand quartz or as per selection and

complete the work satisfactorily as per instruction of architect or Engineer-in

charge.(basic rate of wall clock including gst is rs 750/-per piece)

40 OUTDOOR FLOOR MAT 1.00 3,535.00 No.

Providing and fixing outdoor floor matt of brand comforts or as per selection and

complete the work satisfactorily as per instruction of architect or Engineer-in

charge.(basic size of matt is 1.80 x 1.20 mt)

41 INDOOR FLOOR MAT 4.00 1,262.50 No.

Providing and fixing indoor floor matt of brand my floor or as per selection and complete

the work satisfactorily as per instruction of architect or Engineer-in charge.(basic size of

matt is 1.20 x 0.60 mt)

42 PVC DUSTBIN 30.00 1,010.00 No.

Providing & Supplying of 8 to 10 in dia and 12 to 15 inc ht P.V.C. Dustbin of brand

cello,pigeon etc. complete as per selection & directed by the Architect and approved by

the Engineer in Charge.(BASIC RATE OF DUSTBIN IS RS 850/- )

43 12 MM PROFILE LIGHT 24.46 2,171.50 RN MT.

Providing & fixing 12mm Surface Led profile Housing with powder coating made from

aluminium with Milky acrylic cover with matt finished, Linear profile with 40 WATT

Tranquil LED STRIPS and driver suggested & as directed by EIC/Consultant.and complete

the work satisfactorily as per instruction of architect or Engineer-in charge.(MODEL NO :

SL A010, BRAND SMART LUMINOUS OR EQUIVALENT

44 HANDING LIGHT 5.00 6,060.00 NOS

Providing & fixing of HANGING LIGHT with box type aluminium housing ,frosted acrylic at

bottom, end caps,hanging strings etc as per selection with 40 watt Tranquil led strips &

driver suggested & as directed by EIC/Consultant.and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.( MODEL NO -RL024 OF BRAND RANGE

LITE OR EQUIVALENT)

45 DECORATIVE WALL LIGHT 2.00 3,726.90 NOS

Providing & fixing of DECORATIVE WALL LIGHT as per selection with lamp & driver

suggested & as directed by EIC/Consultant.and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.(MODEL NO : RL2012 SQ OF BRAND RANGE

LITE OR EQUIVALENT)

SR.NO. ITEM QUANTIY UNIT AMOUNT

46 S.S NAME PLATE SMALL 36.00 1,515.00 NOS

Providing and fixing of 2MM TK S.S 316 GRADE matt finish NAME PLATE with cut work

and fixing 3mm acrylic on top or behind of brand Ptglass,astari etc,with all laser and cnc

work,and wooden finish back board ,including all material,SCAFFOLDING labour,15 mm ss

studs for mounting and other hardwares, waste of materials etc and complete the work

satisfactorily as per instruction of architect or Engineer-in charge.(BASIC SIZE OF NAME

PLATE 150 MM X 900 MM)

47 SOFT BOARD 36.00 2,424.00 SQMT

Providing and fixing of soft board of size 1 x 1.8 Quartet White Frame Cork Board, Bulletin

Display Board, Pin Board, Lightweight Board for offices with backing of wood with

complete installation and mounting with other hardwares, waste of materials etc and

complete the work satisfactorily as per instruction of architect or Engineer-in charge.

48 ECOTECH VINYLE WORK - 2D 20.00 2,676.50 Sq. Mt

Providing and fixing of 2-D cut vinyl work of brand 3M including pvc sheet base with all

material,machine cutting, labour,and hardwares, waste of materials etc and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

Providing & Fixing Reading table (size:- 4.780m x 1.200m x 1.200m) with table top 18mm

thick Commercial Plywood with 1.0mm thick lamination sheet fitting with Ghana Beading

Patti. Vertical support should be made by Commercial Plywood & Ghanna Beading Patti

1 with french polish labour work with necessary hardware etc. completed as per site in

charge instruction and as per details drawing. Commercial Plywood Make- (Echotech,

Century, Green), Laminate Make- (Century, Green, Royal Touch). (DWG No. ID/01)

Providing & fixing L- type table (Size:- 1.800m x 1.600m x 1.050m) with table top

would be 38mm thick, made out 18mm Commercial Plywood. All outer surfaces to be

finished using 1mm thick laminate and bottom surface to be finished with 1mm thick

laminate as approved by architect.The vertical support of table would be 18mm

thick Commercial Plywood. The surface would be finished using 1mm thick laminate

as approved by architect. Front of the table is made using 18mm thick Commercial

Plywood. It should have 2 nos. of drawer units made out of 12mm thick Waterproof

2 Commercial Plywood on all side &12 mm thick Commercial Plywood at bottom. It

should have 2 shutters made out 18mm thick Commercial Plywood. All Exterior surfaces

of the table would be finished in 1mm thick laminate & all internal surfaces would be

finished with 1mm thick laminate as approved by architect. including all necessary

hardware & fittings like screw, lock, drawer channel, handle, key board tray, cable

manager etc. completed as per architect drawing & Instructed By Site Engineer.

Commercial Plywood Make- (Echotech, Century, Green), Laminate Make- (Century,

Green, Royal Touch). (DWG No. ID/05)

Storage Unit with table top would be 38mm thick, made out 18mm Commercial

Plywood, central partition of 18mm. 20mm thick shutters made with 18 mm thick, back

side surface of the unit is to be made with 12 mm thick , the outer surfaces would be

finished using 1mm thick laminate and all internal surfaces would be finished using

1mm thick laminate as approved by architect. Storage unit as per measurement from

3 drawer and shutter side, including all necessary premium quality hardware &

fittings like screw,bonding material, lock, drawer channel, handle,magnets, chain

etc. completed as per architect’s drawing & Instructed By Site Engineer.

Commercial Plywood Make- (Echotech, Century, Green), Laminate Make- (Century,

Green, Royal Touch). (DWG No. ID/04)

Providing & Fixing Reading table (size:- 2.400m x 1.200m x 0.750m) with table top

18mm thick Commercial Plywood with 1.0mm thick lamination sheet fitting with

Ghana Beading Patti. Vertical support should be made by Commercial Plywood &

Ghanna Beading Patti with french polish labour work with nessasary hardware etc.

completed as per site in charge instruction and as per details drawing. Commercial

Plywood Make- (Echotech, Century, Green), Laminate Make- (Century, Green, Royal

Touch). (DWG No. ID/03)

Providing & Making Wooden Cubical Reading Unit Using 18mm, 12mm thick Commercial

Plywood, 1mm thick lamination, teak wood molding liping, M S Powder Coated footrest &

Necessary hardware material etc. liping patti french polish finish complete respected by

4A drawing & engineer-in charge's instruction.( Plywood - saras, Kitply, uniply, Anchor,

Green, Wood Stock, Everest, Euro or Century), ( Laminate - Green Laminates, Century,

New Mica Make) ( Size - H 4'-0" x L 8'-0" x W 5'-6")

Providing of Other PVC Plastic Chair Length (47 cm), Width (51 cm), Height (89 cm)

5 PVC Standard Brand chair as per directed by Architect/Engineer - in - charge

Providing & Fixing fitting commercial 8mm thick plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) magazine stand of Size 6' x

4' with 3" x 11/2" vertical supporting and adjustable lag support and horizontal

simple 2" x 1" teakwood patti for magazine support with necessary french polish

hardware labour etc.as per site in charges instruction and as per drawing.

SR.NO. ITEM QUANTIY UNIT AMOUNT

PVC Chairs Providing and fixing PVC Arm Chairs having Premium Matt Finish with

soft feel texture finish, having Size: 600 mm D * 560 mm W * 885 mm H, as per the

7 Specified Company of HOF, Feather Light, Wipro, Godrej, Neelkamal, Supreme etc.as

per selection and complete the work satisfactorily as per instruction of architect or

Engineer-in charge

Providing and fixing of soft board of size 1 x 1.8 Quartet White Frame Cork Board, Bulletin

Display Board, Pin Board, Lightweight Board for offices with backing of wood with

8 complete installation and mounting with other hardwares, waste of materials etc and

complete the work satisfactorily as per instruction of architect or Engineer-in charge.

Prov. & Fixing Roller type Curtain as per aprooved complete as per instructions by

engineer in charge.

Providing and fixing 2-seater LINK CHAIR with moulded foam, seat in 304 stainless steel

beam: cold rolled steel arm & leg:304 stainless steel of brand as per architects

selection,and complete the work satisfactorily as per instruction of architect or Engineer-

METAL RACKS : Providing and fixing of storage rack of angle slotted type of size 78” x 36”

x 18” with 6 shelfs(20 swg) ,including all hardware,colours, channels, etc.and complete the

work satisfactorily as per instruction of architect or Engineer-in charge.

Providing & making wooden partition using 08 mm thick commercial plywood with

mm thick laminate, 3" Ö 1" size teakwood frame, 3" Ö 0.5" molding patti, 08 mm clear

glass & necessary hardware material etc., french polish finish complete respected by

drawing & engineer-in-charge.( Plywood- Saras, Kitply, Uniply, Anchor, Green, Wood

Stock, Everest, Euro or Century), (Laminate - Green Laminates, Century, New Mica make)

13 Providing protection to tile on flooring with POP with Plastic sheet

Proving and Fixing of 2mm TK S.S 316 grade matt finish Name Plate with cut work

and fixing 3mm acrylic on top or behind of brand Pt glass, astari etc, with all laser and

cnc work and wooden finish back board including all meterial, Scaffolding

14 labour, 15mm SS Studs for mounting and other hardwares, waste of materials etc

and complete the work satifactorily as per instruction of architect of Engineer in

charge. (BASIC SIZE OF NAME PLATE 150mm X 900mm)

15 Providing & fixing Powder Coated Aluminium partly glazed and partly panelled partition

using medium duty sections of Hindalco,Zindal, Narmada, Banco or Equivalent

approved make having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt & Middle

section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass of approved make

including all other necessary fittings and fixtures. Entire work will have to be made water

proof using necessary rubber sectioned wherever required. Gaps all round the frame to be

filled with approved water proof sealent. Bottom portion of doors both side to be

covered with 12mm thick prelaminated

particle board of approved make and quality and as per design.

(A) Same as above but Colour anodized 12.500 2,400.00 SM

16 Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with

aluminium section of Hindalco, Jindal , Narmada,Banco or Equivalent approved make

having Poder Coated outer frame Leg Partition section of 63.50 mm x 38.10 mm having

weight 1.158 kg. / R.M. shutter section having size 83.5 mm x 44.45mm ( top & bottom:

1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (

vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No.

19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick

prelaminated sheet of Greenlam, Panama or archid make as approved by Engineer-in-

charge including fixing brass pivot, handle, lock etc.complete.

(A) Same as above but Colour anodized 25.000 3,237.00 SM

EXECUTIVE ENGINEER

NEW EAST (SARTHANA) ZONE

SIGNATURE OF CONTRACTOR SURAT MUNICIPAL CORPORATION