GENERAL-PWD (Buildings) - Renovation and Maintenance of Staff Cabin at Office of the Chief Engineer Buildings-Electronics Works-General Electronics Work

Amount

LAN System

OD77930/2024-2025:Supply and Installation of 19inch, 12U Wall Mounted Network Rack with ACDB 6 port having 3 mtr cable, cable manager, cooling fans, etc. Approved Make: Netrack, President, Valrack.

OD111033/2024-2025:Supply and Installation of Layer 2 Manageable 28 port Ethernet Switch which having 24 x 10/100/1000 Mbps plus 4 x Gigabit 1G SFP (Up Link ports), web manageable supporting ipv6 having 256 MB RAM, Switching Capacity: 52Gbps, AC 230V. Warranty: 3 Year Approved Make: Netgear, Allied Telesis, Brocade, Cisco, HP, Juniper.

OD79746/2024-2025:Supply and Installation of 1G Single Mode Duplex SFP module . Approved Make: Cisco, Netgear, HP, Syrotech.

OD77931/2024-2025:Supply and providing 1Mtr CAT-6 Giga UTP patch cord with LSZH sheath. Approved Make: Actassi, Belden, Commscope, R and M, Molex

OD79841/2024-2025:Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type Patch Panel as per EIA/TIA-TSB 40A specification for interconnecting Switch and Computers, including termination charges. Approved Make: Actassi, Belden, Molex, R and M, Systimax.

OD89165/2024-2025:Supply, laying, certification and documentation of 23 AWG Soild copper CAT-6 UTP cable with LSZH (Low Smoke Zero Halogen) through the existing conduit and caseing and capping as required. Approved Make: Actassi, Belden, Molex, R and M

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

90.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid

90.9.2.3:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.External angle 90 degree

90.9.2.4:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Flat angle 90 degree

90.9.2.2:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Cable devider

90.9.2.10:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Joint cover

90.9.2.11:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Cable retainer

90.9.2.5:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree

90.9.2.8:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap

OD80019/2024-2025:Supplying and fixing following size/ modules, GI box in recess including making good the damage colour washing etc, as required.1 or 2 Module(75mm x 75mm x 60mm deep).

OD88460/2024-2025:Supply and Fixing UL certified 1 or 2 Module PVC Box on surface Approved Make: Belden, Honeywell, Legrand, Molex, R and M

OD77936/2024-2025:Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with one number of RJ45 keystone jack in the existing CMS/existing PVC Box including termination charges etc. Approved Make: Actassi, Belden, Molex, Commscope, R and M

OD77939/2024-2025:Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with two number of RJ45 keystone sockets in the existing CMS/existing PVC Box including termination charges etc. Approved Make: Actassi, Belden, Molex, Commscope, R and M

OD77932/2024-2025:Supply and providing 3Mtr CAT-6 Giga UTP patch cord. Approved Make: Actassi, Belden, Commscope, R and M, Molex

OD77954/2024-2025:Supply and Installation of Manageable Wi-Fi -6 wirelessAccesspoints having following Specifications: Indoor Dual Band Wi-Fi Access Point with smoke detector appearance. Frequancy : 2.4GHz and 5GHz, Wireless Mode: Dual band 2x2 (2.4GHz and 5.0GHz) 4 streams of data for an aggregate throughput of up to 1.8Gbps. Power over Ethernet (PoE), VLAN Support,Anteenas:Internal 3.8/4.5dBi (2.4GHz/5GHz)Bidirectional Multi-User MIMO. Certifications: Wi-Fi Alliance certified (WFA) 802.11ax, with (Wi-Fi 6), WPA2, WPA3,Security:WiFiProtectedAccess (WPA/WPA2/WPA3), 802.11i ,MAC address filtering,Guest Network etc. including all accessories such as power adaptor, mounting kit, connecting CAT-6 patch cords as per site condition, etc Approved Make: Cisco, HP, Netgear

OD102262/2024-2025:Supply and installation of PoE+ Injector Complies with IEEE802.3af/at standards, power delivery up to 30 W with 2 Gigabit ports . Approved make: Tplink, Aruba,Tenda

OD87027/2024-2025:Supply and Installation of necessary Electrical accessories for the distribution of KSEB Power into Network rack in a structured way, including necessary suitable multistrand cables,Sockets, Switches, Electrical PVC boxes etc. as per the site condition

Telephone cabling

OD94651/2024-2025:Supply and Laying of 50 pair PVC insulated and PVC sheathed Telephone cable of conductor size 0.5 mm diameter and conforming to ITD Specification for indoor application through the existing PVC conduits/ oval conduits/casing-n-capping etc as required. Approved make: Finolex, Legrand, RR.

OD86397/2024-2025:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of TELEPHONE DB including Krone rail suitable for fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required- 50 pair

OD86528/2024-2025:Supply and fixing telephone 10 pair 2 way Krone connector in the existing DB and giving connection as required

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.18.2:Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair

OD86534/2024-2025:Supply and Fixing UL certified 1 Module PVC Box on surface Approved Make: Belden, Honeywell, Legrand, Molex, R and M

OD86535/2024-2025:Supplying and fixing following size/ modules, GI box in recess including making good the damage colour washing etc, as required.1 or 2 Module(75mm x 75mm x 60mm deep).

OD86538/2024-2025:Supply and fixing of group A, 1 module face plate on the 1 module existing PVC box/GI box/ CMS fixing one RJ 11 telephone jack with shutter in the face plate. Approved Make: Actassi, Belden, Molex, Panduit, R and M, Systemax.

OD96108/2024-2025:Supply, Installation and commissioning of Caller ID phones (DTMF) with glass epoxy coated PCB 16 digit LCD display 30 incoming and 5 outgoing calls memory ,Real-time clock with year, date and month display along with necessary RJ11 telephone extension cord. Approved Make: Beetel, Panasonic

OD86801/2024-2025:Testing ,refixing of existing connections such as junction box,Krone modules,individual telephone outlets ,two pair cables etc.

PowerCMS Technology (BID ID -2006210)

Bidder Name

F1 Solutions

PowerCMS Technology