WBPWD/SE/SWEC/NIQ30/2026-27

Charges for manpower deployment for day-to-day preventive, corrective, and routine maintenance within the said premises, to be carried out in three (03) shift per day, including working days and holidays, throughout the year, as per the direction of the Engineer-in-Charge (EIC).

The rate quoted shall be inclusive of: i) Operation on all working days, including holidays, and provision of off-day relievers. ii) Minimum labour wages as per prevailing Government norms, bonus, ESI, EPF, and all applicable taxes and duties, and shall be in accordance with the terms and conditions mentioned below.

The manpower requirement shall include for total three (03) Shift per Day, A) One (01) Skilled Electrician for 1st Shift or Shift No. 01 B) One (01) Skilled Electrician for 2nd Shift or Shift No. 02 C) One (01) Skilled Electrician for 3rd Shift or Shift No. 03 The timing of Shift One (01), Shift Two (02) , & Shift 03 shall be as per the direction of the Engineer-in-Charge (EIC).

Charges for the deputing the following manpower:-

Three (03) No. Skilled Electrician. ( Quantity: Three (03) Person x 12 Month = 36 Unit )

Objective The guiding philosophy of this contract shall be “Public Interest”, and all activities shall be carried out accordingly. The objective of preventive and corrective maintenance is:  To prevent fire hazards due to electrical short circuits or faults  To ensure safety of occupants and the general public  To minimize electrical breakdowns and associated downtime Any incident such as fire hazards, falling of ceiling fans/luminaries & suspended/pendent Electrical fittings, or similar occurrences due to lack of maintenance shall be viewed seriously, and the agency shall be held responsible.

A. Scope of Work The scope includes routine, preventive, corrective and Breakdown maintenance of the entire electrical installation within the premises, including but not limited to: i. Distribution Substations including HT gear, Transformers (performing different safety and performance tests and overhauling of substation equipments as detailed under A.2. ii. LT distribution networks and panels including Power and control cables iii. Electrical wiring for all buildings (residential and non-residential) iv. Distribution Boards (DBs), LT panels, feeder pillars, AMF panels v. Switchboards, sockets, Computer Points, Fittings & Fixtures vi. Electrical Power outlets for air-conditioning systems, sound systems, PA systems, etc. vii. Compound lighting including high mast viii. All type of signboards e.g. Glow-sign, Metal Signage, LED signage ix. Electrical installations up to switchboards/panels for lift machine rooms & pump rooms x. Timers for AC, Air-Curtain & compound lighting (operation, configuration, repair/replacement where supplied departmentally) xi. Fire detection system resetting/switching off as and when directed by EIC / AE / JE xii. Lightning Conductor Installations including it’s Earthings xiii. Operation of DG sets.

A.1 General Requirements The agency shall: A.1.1 Materials & Consumables Provide all consumables required for maintenance, including:  Cotton waste, insulation tape, grease, battery water, fuse wires, CTC and other cleaning agents, Soaps etc.  Cable Tie, Split pin and Jam Nuts of Ceiling Fans in sufficient quantity, nuts/bolts, Ferrules & lugs and other minor accessories  All Logbooks and/ or Register as mentioned in this document. A.1.2 Tools & Instruments Provide and maintain calibrated tools and instruments, including:  Digital multimeter, Digital clamp on Ammeter, Megger (500V & 5000V)  Continuity Tester, Earth tester  Complete set of screwdrivers (flat, star, insulated) and Line Tester  Combination pliers& Long Nose Pliers, Wire stripper  Pipe wrench, Ring and open-end spanner set and Socket wrench set  Electric Drill machine, Double Test Lamp, Hackshaw & Hammer, Torch  Crimping tools upto 400 Sq.mm, Sockets of some common sizes  Insulated ladder etc.