Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.7 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹41.1 L+₹2.4 L (6.30%)Rejected-AOC 53 13 A OUTER CIRCULAR ROAD KILPAUK GARDEN COLONY CHENNAI 600 010 | CHENNAI | CHENNAI | TAMIL NADU | 600010 | L2 | Rejected-AOC NOT BEING L1 | |
| 3 | L3₹42.2 L+₹3.5 L (9.03%)Rejected-AOC DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L3 | Rejected-AOC NOT BEING L1 | |
| 4 | L4₹43.4 L+₹4.7 L (12.1%)Rejected-AOC 22 1685 ST JACOB CHURCH LANE PAMBAIMOOLA EDACOCHIN ERNAKULAM KERALA 682010 | COCHIN | ERNAKULAM | KERALA | 682010 | L4 | Rejected-AOC NOT BEING L1 | |
| 5 | L5₹44.3 L+₹5.6 L (14.5%)Rejected-AOC GP KIZHAKKAMBALAM KOLENCHERY | THRISSUR | KERALA | 680667 | L5 | Rejected-AOC NOT BEING L1 |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
YOGENDRA KUMAR
GE(I)(CG)KOCHI BUILDING NO.22/2614, OPP. SANTHOM CHURCH MUNDAMVELI POST RAMESWARAM KOCHI-682 507
IMPROVEMENTS TO KITCHEN AND CONNECTED WORKS AT CGRA KOZHIKODE.
2023_MES_592771_1
8831E8
Open Tender
Civil Works
Item Rate
180 days
KOZHIKODE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (I) (CG) KOCHI
₹87,000
Yes
21 Jul 2023
2 May 2023
19 Jun 2023
2 May 2023
12 Jun 2023
29 May 2023
2 May 2023 - 9 May 2023
Amount
Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed.
Demolition of brick or PCC block masonry built in cement mortar including all quoins,arches,pillers etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified and as directed.
Material and labour for precast cement concrete solid block masonry using Solid PCC block type C4 exceeding 10 Cm width, built in cement mortar 1:4 all as specified and as directed.
Material and Labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and as directed.
Material and Labour for 5mm thick rendering on fair faces of ceiling surfaces in cement mortar 1:3 finished even and smooth with out using extra cement complete all as specified and as directed.
Material and Labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material and labour for providing 25mm thick plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooring finished rough to reiceve toping complete all as specified and as directed.
Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork and filling the joints with sand and bitumen in 1:1 ratio complete all as specified and as directed.
Material and Labour for vitrified ceramic tiles 8-10 mm thick light shade area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
All as per item No11 above but in vertical surfaces like skiting/dado etc jointed in neat cement slurry and pointed in colored cement to match colour of tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Material and Labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile of size 400 x 400 x 7 to 8mm thick in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. NOTE: No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Material and Labour for glazed ceramic coloured tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 cmplete all as specified.
Demolition of cement concrete in ground floors and paving ( reinforced) n exceeding 15 cm thicknesses, below or above ground level, complete all as specified and as directed.
Material and labour for preparation of of new plastered/concrete surfaces of walls and applying two coats of acrylic distemper of approved shade/tint over a coat of primer, over 3mm thick wall care putty finish to achieve uniform smooth surface of wall all as specified and as directed.
Material and labour for preparation of new plastered/concrete surfaces of ceiling and applying two coats of acrylic distemper of approved shade/tint over a coat of primer all as specified and as directed.
Material and labour preparation of newly plastered wall surfaces and applying two coats of exterior emulsion (weather coat) paint over a coat of primer complete all as specified and as directed.
Material and labour taking down chowkhats or frames, without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 sqm in each and removing as directed.
Material and labour taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 Sqm in each and removing as directed.
Taking down shutter of any drescription Not exc 1 sqm in each panes and refixing the same opening complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof/wall coverings complete all as specified and as directed.
Supply and fixing pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through through specialist agency and complete all as specified and as directed.
Supply and fixing 3mm thick polycarbonate solid corrugated sheet with sealed end and fixed with sealant and self driven screw complete all as specified and as directed.
S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed. Make :Asian sleek cat part No: ASSEPL430505100 or equivalent in Hettich
S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 200 mm for different use such as placing plain plate etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed. Make :Asian sleek cat part No: ASSEPCB430505200 or equivalent in Hettich
S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 200 mm for different use such as placing cup & saucer /cutlery / thali etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed. Make :Asian sleek cat part No: ASSETLP430505200 or equivalent in Hettich
S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 100 mm for different use such as placing dish / cup & saucer /cutlery / thali etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed. Make :Asian sleek cat part No: ASSEPCB430505100 or equivalent in Hettich
Material and Labour for repairing of chajja/roof projectio by taking down old plaster/concrete of any description and making good with cement concrete (nominal mix)1:2:4 Type B0 and finishing the surface with CM 1:3 10mm thick and applying two coats of exterior emulsion (weather coat) paint over a coat of primer complete all as specified and directed.
Material and labour for second class hard wood(indian teak wood) plain solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, well seasoned and finished with polishing, fixed to wall and making good to wall carving as approved all as specified and directed.
Material and Labour for 30mm thick factory made flush shutter with solid core construction with block board core and plywood face panels commercial type on both sides including lipping on edges complete all as specified and directed.
Supply and Fix 2nd class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including taking down old unserviceable one.
Supply and fix 100mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed.
Supply and Fix 100mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge.
Supply and fixing aluminium alloy,anodised, sliding door bolt of length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed.
Supply and Fix 300mm long Mild steel ordinay rat tail rod pattern springs including roller and roller plate complete and fixed complete all as specified and directed.
Material and Labour for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.
Supply and fix in repairs waste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed.
Supply & Fixing in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
Supply and fix in repair sinks made of stainless steel 1 mm thick kitchen or laboratary with plugs, washers and wastes incl bedding in CM on to dwarf walls, or incl fixing cantelever brackets & connecting union to pipe overall size 458 mm x 410 mm x 420mm without drain board and bowl size, 405 mm x 355 mm x 160 mm including waste Pipe all as specified and as directed. Make: Blue Star/Nirali/Diamond/ Pheonix.
Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 10 mm thick backing coat in CM 1:4 complete all as specified. Including pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite (including moulding etc).
S & F in repairs stainless steel plated rack of overall size 80 x 90 x 25 Cm made out of 0.8mm thick 304 SS sheet, with shelves and racks to hold kitchen utensils such as plated, tumblers, bowls and cutlery etc with edges of rqacks and shelves turned in, including fixing to wall iwth brass chromium plated screws as directed, plate rack of design and quality as approved and directed.
Material and Labour for rounding to edges of Granite slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed
Material and labour for Cleaning of overhead tank by closing of all valves in distribution and dewatering of complete tank and cleaning with wire brush, cloth, bleaching powder, removing dirt, scale from the tank and from mouths of circulating pipes etc through drain pipe or by manually and washing of inner surface using lime and bleaching powder and removing the same until clean surface is obtained, all as specified and directed by Engineer-in-Charge (Tank shall be cleaned yearly and writing with white paint over black base on the tank as "TANK CLEANED ON" with date with 5 cm high letters/ numbers and connecting all connections after cleaning and testing for leakages of tank of capacity 500 Ltrs. complete all as directed. Note: Tank shall be cleaned yearly as directed by Engineer-in-Charge.
Material and labour for Cleaning of overhead tank by closing of all valves in distribution and dewatering of complete tank and cleaning with wire brush, cloth, bleaching powder, removing dirt, scale from the tank and from mouths of circulating pipes etc through drain pipe or by manually and washing of inner surface using lime and bleaching powder and removing the same until clean surface is obtained, all as specified and directed by Engineer-in-Charge (Tank shall be cleaned yearly and writing with white paint over black base on the tank as "TANK CLEANED ON" with date with 5 cm high letters/ numbers and connecting all connections after cleaning and testing for leakages of tank of capacity 1000 Ltrs. complete all as directed. Note: Tank shall be cleaned yearly as directed by Engineer-in-Charge.
Supply and fix in repairs 50 mm size mild steel body Mortice lock, vertical type, with 2 brass liver, fixed to cub board /aluminium door complete all as specified and as directed.
Supply and fix mild steel nickel coated telescopic drawer slider, one inch size, 18 inch long two beam max load capacity 35-40kg suitable for working table, drawer on andy size and any pattern complete all as specified and as directed.
Supply and Fix 19mm thick plywood 7 ply with BWR type BB, fixed with adhesive and nails for wall panel/cladding of cubical cabin of any shape to required size, pattern/design of cabin complete all as specified and as directed by Engineer in Charge.
Supply and Fix 12mm thick plywood 7 ply with BWR type BB, fixed with adhesive and nails for wall panel/cladding of cubical cabin of any shape to required size and pattern/design of cabin complete all as specified and as directed by Engineer in Charge.
Supply and Fix 9mm thick plywood 7 ply with BWR type BB, fixed with adhesive and nails for wall panel/cladding of cubical cabin of any shape to required size and pattern/design of cabin complete all as specified and as directed by Engineer in Charge.
Material and Labour for 0.90mm thick decorative laminate type I of surface finish(colour & pattern as approved) fixed with approved adhesive as per manufacturers instruction finished to approved size for wall panel/cladding of cubical cabin of any shape of any pattern and design etc complete all as specified and as directed by Engineer in Charge.
Supply and fix Cast brass powder coated auto lock and release concealed hinges of size 100mm complete all as specified and as directed.
Supply and fix Cast brass powder coated Box type decorative door handle of size 75mm complete all as specified and as directed.
Supply and fix Cast brass powder coated Box type decorative door handle of size 100mm complete all as specified and as directed.
Supply and fix IInd class hard wood plain fillets square or rectangular or triangular, clean swan of sectional area exc. 6 sqcm and not exc. 13 Sqcm fixed with nails or brads including french polishing over a coat of sealer and wood filler, complete all as specified and as directed.
Supply and fix IInd class hard wood plain fillets square or rectangular or triangular, clean swan of sectional area exc. 3 sqcm and not exc. 6 Sqcm fixed with nails or brads including french polishing over a coat of sealer and wood filler, complete all as specified and as directed.
Supply and fix 125mm long butt hinges type B 12, cast brass with mild steel hinge pin, bright polished complete all as specified and as directed.
Supply and fix magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
Material and labour for two or more coats of French polishing on wooden surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed.
Taking down carefully (copper/aluminum) point wiring complete of any type (batten/surface conduit) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants regulators etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster or tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.
Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and including working voltage 1100volts grade, drawn through and including PVC casing and caping including all accessories ISI marked including press fit white PVC open switch/surface board high strength and crack resistance and unsheathed copper conductor stranded cable (FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:-. (a ) one light point controlled by one switch 5 Amps
(b ) one fan/ exhaust fan point point controlled by one switch 5 Amps
(c) One 3 pin socket outlet 5 Amps on independent board
(d ) One 3 pin socket outlet 5 Amps on same board
(e) One bell point controlled by one bell push
Supply and fixing of Modular switch, one way, 6Amps, two module complete all as specified.
Supply and Fix Modular Bell Push, 5 Amp, 1 module complete all as specified and as directed.
Supply and Fix Modular Socket, 6 A- 2/3 pin combined 2 module complete all as specified and as directed.
Supply and Fix Modular Socket, 6/16 A- 2/3 pin combined 2 module complete all as specified and as directed.
Supply and Fix Modular Switch 1 way, 16 Amps, 1 module complete all as specified and as directed.
Supply and fix Fan step regulator, 120 w, 2 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 12 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 8 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 6 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 4 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 3 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 1/2 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 12 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 8 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 6 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 4 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 3 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 1 module complete all as specified and as directed.
Supply and fix ceiling rose, 65x50mm 3 terminal,poly carbonate,isolated body white/any shade complete all as specified and as directed.
Schedule of Credit (Minus) Rs.37560.00 NOTE: Bidder shall insert credit amount of Rs. 37560.00 as rate in Green field under Col-13.
M/s.Sai Agency
KDR CONSTRUCTION
ZOOM ENTERPRISES
VIJAY CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .