CERTAIN REPAIRS TO JOINERY PLUMBING AND SANITARY WORK AT UNIT 495 AND UNIT 763 UNDER AGE BR WEST AT GE DEHU ROAD

Amount

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each.

–Ditto- as item No 1 above but n.exc. 1.50 sqm each

Taking down shutters of any descriptionn. exc. 1 sqm each

Taking down shutters of any description n. exc. 2 Sqm each.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts orings measured from the face of the jamb into wall exc half brick but no exc one brick.)

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

M/L for PCC 1:2:4 type B -0 (using 12.5mm graded aggregate ) in door frame filling.

S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

M&LFlush shutter solid core 30 mm thick with brick board core & ply wood face panels commercial type on both sides.

S & F steel window double leaf double shutter (gauge shutter will open inside and glaze shutter will open outside) with side hung shutter including box type hinges with peg stay 300mm long and 100 mm long handles of Z Section welded to frames & 150 mm long tower bolt welded to shutter one each at top and bottom to each shutter complete with glazing bar for one shutter and gauge bars of FI 10x 3mm thick dovetailed or welded including guard bar 12mm square etc .All as specified.

Ditto all as per item no 13 above but single leaf.

S&F steel vantilators with top hung shutters including hinges , steel peg stay complete, all as specfied.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S & F pre-laminated particle board 25mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl external teak wood lippling mm thick fixed with nails complete.

S&F continuous Piano type hinges mild steel bright finish or electrogalvanised (width of flap 40 mm when open) complete.

M & L Plywood, grade BWP, 12mm thick,Nos of ply 7, type BB fixed with screws to timber frame work

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint

M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a priming coat of Pink primer.

S&F aluminum powder coated window and ventilator shutter sliding type three track way with or without sash bars of aluminum section weighing 0.55 Kg per Sqm including necessary joining clits , glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles complete .

S&F aluminium powder coated door shutter section weighing 0.55 Kg/m incl necessary rubber beadings, mouldings, handles, locking arrangements, aluminium snap beading, jointing cleats, glazing clips complete as specified and directed by Engr-in-Charge.

S & F aluminum powder coated frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete

S & F 5.5mm thick tinted glass into aluminum frame complete including necessary of rubber beadings complete as specified and directed by Engr-in-Charge.

S&F Aluminium grills for windows and ventilators powder coated weight not less than 3.00 Kg per Sqm, design and pattern all as directed by Engr-in-Charge.

S & F double action floor door spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of metal steel heavy duty and fixed complete.

S & F framed work as in doors or gates of angle or other section with gusset plates, rail, braces, etc, complete, drilled for fixing of steel sheeting or other concering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door gfitting (exclusive of steel sheeting or other covering , running rails and guides) and hanging , also fastening and fixing complete confirming to Fe-410 W (gde E-250)quality-A)

S&F in repairs Butt Hinges medium weight cold rolled mild steel 100 mm long complete .

Ditto all as per item no 30 above but Stainless steel butt hinges for 100 mm long complete.

S&F 250 mm Aluminum alloy, anodised , sliding door bolt with ahsp and staple (BOLT TYPE) and fixing clips of sheet, cast orextruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.

S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F 150mm long Aluminium handles cast type anodised

S&F Haps and staple 100mm size, aluminium anodised, including bolt to hinge plate and fixed with screw.

S & F 250mm, ordinary rat tail rod pattern spring incl roller and roller plate complete.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples .

S&F as in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples .

S&F in repairs 3 mm thick sheet glass ordinary qualities in panes n.exc. 0.50 Sqm each pane and glazing with oil putty.

S&F 3mm thick sheet glass ordinary qualities in panes n.exc 0.5 Sqm each pane & glazing with oil putty complete.

S& F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc. 0.50 Sqm in each pane

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc all as specified

M&L Coloured ceramic tiles in vertical surface 350x250mm x 7mm/450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 10 mm thick backing coat in CM 1:4 all as directed.

M & L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

Demolition of brick work/stone boulder masonery built in cement mortar in any position

M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM (1:6) etc complete all as specified and directed

Ditto all as per item no. 46 Above but half brick work in CM (1:4) etc complete all as specified and directed

Taking down cement plaster from brick/stone/concrete wall surfaced incl racking out joints hacking for key scrubbing down with water etc all complete and disposing of debris to distance upto 250M all as directed

M&L for rendening 15mm thick cement plaster in CM (1.4) for fair faces of brick work or concrete surfaces finished even & smooth with out using etra cement.

M & L for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces including finishing the surface with a thin layer of sagol all as specified and directed.

M & L three coats of White washing on newly plaster wall surface incl necessary preperation of new surface complete all as specified and directed by Engr-in-Charge.

M & L two coats of OBD on newly plaster wall surfaces incl necessary preperation of new surface complete all as specified and directed.

M & L two coats of Cement base paint on newly plaster wall surfaces incl necessary preperation of new surface complete all as specified and directed.

Demolition of concrete ( un reinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M&L 75mm thick cement conc type D-2, 1:4:8 (40mm grade agg), in sub base.

M & L for precast concrete interlocking paves block of any shape & size coloured glossy finish, rubber moulding confirming to IS-1565S-2006 of 60mm thick M-35 grade with white cement & pigment. laid over sand cushing of 50mm thick complete all as specified & as directed by Engineer in -Charge.

M & L PCC 1:2:4 type B1 (20 mm graded aggregate) as in bed blocks,copings , kerb stone etc.

RAMESH PATIL

DR J S CHADHA AND SONS

M/S B.A. GAIKWAD