WORK

Amount

Troubleshooting/rectification/restoration/configuration of the Siemens make SCADA System installed at 220 KV Sub-Station Bahraich

SCADA HMI Troubleshooting/rectification of the Siemens make SCADA substation Automation System installed at 220kV Bahraich, The following work included to make SCADA System Healthy (A) Replacing the defective Fiber patch cords/CAT-5 cables, if any. (B) Checking & rectifying the healthiness of IEC61850-3 compliance Ethernet Switches. (C) Rectification /checking healthiness of the old backup installed at the system, if any. (D)Checking the all-healthiness communication in between protection relays and SCADA system. (E) Checking the SLD communication failure on SCADA HMI. F) Checking the real time Analogue Values on the SCADA System. (G) Checking and rectifying the control command issues from SCADA to BCPUs, if any. subject to CB /ISO must be control from the respective BCPUs. (H) Installation of OS window 10 (Long time support) and updated HMI (WinCC+SCC) (J) Reinstallation of old backup in Main and Standby sever SCADA HMI-I & HMI-II if required. All above required mentioned material will be provided by the contractor.

Bay Integration/configuration in the existing SICAM 230 ver 7.11 make SCADA of 33 kV Bays, work includes as below: (A) Creation of Single line Diagram(SLD) Graphics. (B) Database point configuration as per the existing database version 7.11. (C) Alarm/EVENT/REPORT templates veneration. (D) Real time report page generation for Hourly/daily/monthly). (E) Soft Interlock logics templates generation. (F) Buffered/Un-buffered Report Control Block updation as per the BCPUs files. Following are the details of 132 KV Bays for integration/configuration. 1. 33 kV Bay No-313 (33 KV Bhakla DOC 31.10.2020) 2. 33 kV Bay No-314 (33 KV Medical DOC 20.01.2020) 3. 33 kV Bay No-315 (33 KV TA Green DOC 11.02.2019)

Mapping/Configuration of the ICD files variables of IEC61850 base relays in existing database software of feeder bays. (01 Job includes 01 Relay per Bay work)

Supply and Installation of IEC61850 based Ethernet Switch suitable for existing SAS system with sufficient Fiber/RJ45 ports..

Gateway Configuration and testing validation work of the above mentioned feeders to send the real time data to SLDC Lucknow and SLDC Modipuram.

Supply and installation Various type of Fiber patch LC to LC, LC to ST MM patch cords of different lengths as required.

Troubleshooting/rectification/restoration/configuration of the Siemens make SCADA System installed at 132 KV Sub-Station Kaiserganj

SCADA HMI Troubleshooting/rectification/restoration of all healthy 132 KV/33 KV Feeders real time data at local SCADA HMAI as previously running on the SCADA also rectifying the issue related IEC 1850 variable and buffered report control block to mate healthy communication on IEC-104 protocol over TCP/IP to SLDC Lucknow.

Configuration of the stand by CPT cum gateway in the existing SICAM, Siemens make SCADA system. Mapping the IEC61850 variables as per the field signals in the gateway to make the communication on IEC-104 protocol over TCP/IPs to Modipuram SLDC. Firmware updation for the Network protocol (NTP) and configuration the time synch. Validation of the real time data to Modipuram in between Relays / BCUS.

AR POWER AUTOMATION (BID ID -5112741)

exSel Corporation (BID ID -5112869)