REPAIR TO JOINERY ROOF TREATMENT PLUMBING FILLING DRAIN AND OTHER MISC WORKS UNDER AGE E/M NO II OF GARRISON ENGINEER UTILITY II VISAKHAPATNAM

Amount

Taking down existing roof treatment including plastering below tar felt etc., of any type, any thickness and removing the same exceeding 5 KM outside MD complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortar 1:4 mixed with water proofing compound including brushing with neat cement slurry @ 3KG per Sqm as in roofs complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound

Supply and lay HYPERPLAS-STANDARD 3Kg/ Sqm polymeric membrane incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bituminous primer @ 100 Grams/ Sqm, followed by a coat of blown bitumen of grade 85/25 or 90/15 @ 1.2Kg/ Sqm each at the top and bottom and applying one coat of aluminium paint on the membrane complete including sealing all the joints by thermo fusion with minimum 10cm overlap complete all as per manufacturer's instructions all as spcified and as directed.

S&F steel rolling shutters of 1.00 mm of laths, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type and MS safety lever lock 4 levers including taking down old unserviceable one complete all as specified and directed by Engr-in-charge.

Taking down wooden Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as directed

Taking down wooden Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as directed.

S&F Aluminium grill 7.5 mm thick of pattern DG 104 of DECOGRILLI or equivalent surrounded by 'F' channel of 1.2 mm thick fixed to aluminium window complete all as specified and as directed.

S&F powder coated alluminium window frame made of 91x 43 x2.0 mm sections and shutters made of 39.4 x 17.7 x 2.0 mm thick sections with 4mm thick tinted glass and mesh shutter made of 39.4 x 17.7 x 2.0 mm thick sections with fixed stainless steel wire mesh including locking handle complete all as required and all as specified and directed

S&F Aluminium door frame made of 101.50 x 44.5 x 2.0 mm thick sections and stiles and top rail made of 47 x 44.5 x 2.0 mm thick sections, lock rail made of 50 x 44.5 x 2 mm thick sections and bottom rail made of 101.50 x 44.5 x 2.0 mm thick sections and with 5.5 mm thick tinted glass for top and 12 mm thick pre-laminated particle board (Novapan) for bottom panel including joining clips, rubber beading, anodized aluminium snap beading, glazing clips etc., with mortice lock of Godrej Make, handle, tower bolt, Hydraulic door closer complete all as directed

M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and as directed.

M & L for Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified.

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 100 mm aluminum anodised bow handles complete all as specified and as directed.

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.

Supply and fix staineless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium /pvc sections fixed from ground floor to height of 12 floors complete all as specified and as directed.

Taking up or down steel tubing of size 15 mm bore and connections complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing of size 20 mm bore and connections complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing of size 25 mm bore and connections complete all as specified and directed by Engr-in-Charge.

Supply and laying GI pipes medium grade of 15 mm dia with all fittings fixed to wall/ ceilings or laying in floors complete all as specified and directed.

Supply and laying GI pipes medium grade of 20 mm dia with all fittings fixed to wall/ ceilings or laying in floors complete all as specified and directed.

Supply and laying GI pipes medium grade of 25 mm dia with all fittings fixed to wall/ ceilings or laying in floors complete all as specified and directed.

S&F in repairs PVC float valve of 20mm dia high pressure with polythene float and fly nut complete screwed for iron pipe or brass and fixed complete including nipple complete all as specified and as directed.

Supply and fix in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and as directed.

Supply and fix vitreous china squatting pan of orrisa pattern of size 580x440mm colour to match the existing surface with P & S trap front of back with intergral foot rest including connection to trap and to flushing pipe anti syphone pipe etc complete including making good the floor in repairs complete all as specified and as directed.

Supply and fix Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand in repairs complete all as specified and as directed.

S & F 32 mm dia Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F 32mm dia waste pipe fixed to vest coupling complete all as specified and as directed.

S & F PVC Connection both and screwed to iron pipes of 15mm dia 450mm long complete all as specified and as directed.

S&F 15 mm bore fancy type pillar taps cast copper alloy, with capstan heads chromium plated screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and as directed.

M&L for Brickwork with modular fly ash bricks, straight or curved on plan exc 6M mean radius, built in CM (1:4) complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints hacking for key scrubbing down with water complete all as specified and as directed .

M&L for rendering 15 mm thick on stone masonry or other than fair face surfacesof brickwork in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness complete all as directed.

M & L 40 mm thick PCC 1:2:4 type B2 (using 20 mm graded granite stone aggregate) as in floorings including finishing the surface even and smooth complete all as specifed and as directed.

M&L for chequred cement concrete tiles 30cm x 30cm x 22mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 20mm thick in CM 1:6 screed bed or bedding layer complete all as specified and as directed.

M & L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and no pigments complete all as specified and as directed.

M&L for sand cushioning for interlocking tiles complete all as specified and as directed.

M & L 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) as in plinth protection finishing the surface even and smooth using extra cement complete all as specifed and as directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded granite stone aggregate) as in foundation, filling, mass concrete complete all as specifed and as directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling old unserviceable complete all as specified and directed.

Dismantling of structural steel work including doors, gates but excluding frame truss etc., complete all as directed

M&L for MS steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W gde-e-250 with one coat of Zinc chromate primer complete all as specified and directed by Engineer-in-Charge.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete of Fe- 410 (grade -E250) quality 'B' complete all as specified and direcetd.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe- 410 (grade -E250) quality 'A' complete all as directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as directed.

M & L for precast RCC cover slabs (1:2:4) type B1 (using 20 mm graded granite stone aggregate) including all necessary formwork and finishing the exposed concrete surface complete all as specifed and as directed. Note: Reinfocement will be measured and paid separately

M&L for Mild steel TMT 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M & L Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M & L for preparing old surfaces of walls including brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and as directed.

M & L for preparing new plastered or un plastered surfaces of walls applying two coats of exterior weather proof coat paint over a coat of primer complete all as specified and as directed.

M & L for preparing of old decorated surfaces and applying one coat of exterior weather proof coat paint on walls and all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer after finishing the surface with two coats of putty (Birla/JK) to get smooth finish complete all as specified and directed.

M&L for complete removal of existing treatment from wall and applying two coats of oil bound distemper over a coat of primer after finishing the surface with two coats of putty (Birla/JK) to get smooth finish complete all as specified and directed.

M & L Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

SREE GAYATRI INFRA

Prasad and Suresh Constructions

P SRINIVASA RAO

L DURGA GANESH

KUNDAN SAI ENTERPRISES

MR ENTERPRISES