Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹5.6 LAccepted-AOC | l1 | Accepted-AOC WORK AWARDED | |
| 2 | l2₹6.0 L+₹39,204.66 (7.00%)Rejected-Finance | l2 | Rejected-Finance work awarded to RAMAKRISHNAN M |
| Sl No | Description | Qty | Unit | HANEEFA P V L2 | RAMAKRISHNAN M L1 |
|---|---|---|---|---|---|
| 1.00Civil work | |||||
| 1.00 | 22.6:Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured) | 441.5 | sqm | 683.73 ₹3,01,869.53 | 639 ₹2,82,121.06 Lowest |
| 1.00 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | 441.5 | sqm | 72.76 ₹32,123.83 | 68 ₹30,022.27 Lowest |
| 1.00 | OD144303/2025-2026:Supplying and stacking Ist clss MP roofing tiles of size 373.75mm or nearest size including cost and conveyance of all materials to site and all labour charges etc.complete | 200 | 1 nos | 41.73 ₹8,346 | 39 ₹7,800 Lowest |
| 1.00 | OD144304/2025-2026:Re-roofing with departmental MP roofing tiles including all materials to site and all labour
charges etc.complete | 441.5 | sqm | 79.18 ₹34,958.29 | 74 ₹32,671.3 Lowest |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 123.75 | kg | 216.14 ₹26,747.33 | 202 ₹24,997.5 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 61.88 | kg | 181.9 ₹11,255.06 | 170 ₹10,518.75 Lowest |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 12.38 | sqm | 827.11 ₹10,235.49 | 773 ₹9,565.88 Lowest |
| 1.01 | 12.51.2:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Flashings / Aprons (Upto 600 mm) | 16.5 | metre | 497.55 ₹8,209.58 | 465 ₹7,672.5 Lowest |
| 1.01 | OD144320/2025-2026:Providing and fixing 160 mm dia 2.50 kgf/cm2 PVC rain water gutter and accessories with pre painted GI Clamps,bolts,nuts and washers including the cost of conveyance of all materials to the site and all labour charges etc. | 113.85 | metre | 288.9 ₹32,891.27 | 270 ₹30,739.5 Lowest |
Tender Value
₹5.8 L
EMD Value
₹14,611
Closing Date
17 Jun 2026, 3:00 pmClosed
Assistant Executive Engineer
O/o Assistant Executive Engineer, Building subdivision Kozhikode
GENERAL-HMDC vellimadukunnu, Kozhikode.-Leak rectification, Water proofing etc-General Civil Work
2026_PWD_855333_1
PWD/BLDG/TR/16605/2025_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
180 days
Vellimadkunnu
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,290
Yes
₹14,611
Yes
18 Jul 2026
10 Jun 2026
19 Jun 2026
10 Jun 2026
17 Jun 2026
10 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Civil work | |||||
| 1.001 | 22.6:Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured) | 0.6 | sqm | - | - |
| 1.002 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm | 0.6 | sqm | - | - |
| 1.003 | OD144303/2025-2026:Supplying and stacking Ist clss MP roofing tiles of size 373.75mm or nearest size including cost and conveyance of all materials to site and all labour charges etc.complete | - | 1 nos | - | - |
| 1.004 | OD144304/2025-2026:Re-roofing with departmental MP roofing tiles including all materials to site and all labour
charges etc.complete | 0.6 | sqm | - | - |
| 1.005 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.006 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.007 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | - | - |
| 1.008 | 12.51.2:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Flashings / Aprons (Upto 600 mm) | - | metre | - | - |
| 1.009 | OD144320/2025-2026:Providing and fixing 160 mm dia 2.50 kgf/cm2 PVC rain water gutter and accessories with pre painted GI Clamps,bolts,nuts and washers including the cost of conveyance of all materials to the site and all labour charges etc. | 1 | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1445568.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1445568.xls
BOQ • 0.31 MB
viewsbd.pdf
Tender Documents • 1.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .