Revitalization of Major River Lift Irrigation scheme at Barabaidyapur IV under Berhampore II AM Division

Amount

UPVC and P.V.C. PIPES & ACCESSORIES

315 mm dia P.V.C. Pipe(Cl-I) with Coupler (Class-I)

200 mm dia P.V.C. Pipe(Cl-I) with Coupler (Class-I)

140 mm dia P.V.C. Pipe(Cl-I) with Coupler (Class-I)

140 mm dia P.V.C. Pipe(Cl-II) with Coupler (Class-II)

200 mm dia P.V.C. Equal Tee

140 mm dia P.V.C. Equal Tee

315 mm dia F.T.P.

200 mm dia F.T.P.

160 mm dia F.T.P.

160 X 140 mm P.V.C. Reducer (Class-II)

200 X 140 mm P.V.C. Reducer (Class-II)

140 X 90º P.V.C. Bend IS 10124

315 X 90º P.V.C. Bend IS 10124

200 mm dia P.V.C. End Cap(Cl-III)

140 mm dia P.V.C. End Cap(Cl-III)

315 mm dia P.V.C.Extra Coupler (Class-II)

200 mm dia P.V.C.Extra Coupler (Class-II)

140 mm dia P.V.C.Extra Coupler (Class-II)

150 mm dia P.V.C Flexible Hose pipe

Solvent Cement(Exra)

B. M.S / G.I. ACCESSORIES

150 mm dia C.I. Sluice Valve

150 mm dia CI Foot Valve (Flanged type)

150 mm dia CI Alfa Alfa type Valve (C type)

150 mm dia 90º GI bend

150 mm dia 90º GI bend (With priming arrangement)

150 mm CI NRV, Flange end & swing type with side By-pass arrangement IS: 5312 /2004 with latest amendment , Wt. 40 kg

MS Shore manifold as per drwaing(Annexure-E)with Painting made 350 mm dia MS ERW of 2 nos of 150 mm diameter inlet and 3 nos of 150 mm dia outlet all end flange welded,MS ERW pipr conforming to IS 1239(Part-1)/3589,medium and MS flange conforming to IS 6392/71 (table-17 execpting thickness) Flange 150 mm dia-12 mm thick

150 mm M.S Special Bend both End flange welded (As per Annexure-F)150 mm ERW .Pipe should be conforming to IS 1239(Part-I)/2004,medium and 12 mm nominal thickness MS Flange conforming to IS 6392/1971,table-17 (Total pipe length should be 2.5m)

M.S.Reducer 300mm long both end flange welded. Flange should conform to IS 6392/71 Table 17,300mm/150mm

150 mm dia MS. E.R.W. Pipe with both end flange (each of 6 meter length) 4.8 mm thick (Galv. MS, IS 4736)

M.S. Hose Clamp

150 mm dia 5mm thikness 45 mm width

C.I. Flanged Tail piece/Nipple

150mm dia. GITail piece one end flanged other end grooved.

Foundation Bolt

For Electromotor Pump Sets

Nuts & Bolts

Compresed Asbestos fibre jointing for Quadruped & Tripod set( for raised surface of Flange as per IS-6392)

Foot Valve Leather Washer(150 mm dia) Imperial/ Techno

Rubber Insertion( for raised surface of Flange as per IS-6392) 5 mm thik with std. drill hole with proper renforcement 2 ply cotton fabric

300mm.dia( Table-11)

300mm.dia( Table-5)

200mm.dia( Table-11)

200mm.dia( Table-5)

150mm.dia( Table -17)

150mm.dia( Table -5)

ELECTRICAL ACCESSORIES

200 m3/hr,180 m Head(20 HP) Electro motor pump set IS 12615 & IS 6595 The Motor shall be designed for operation at 415V(±6%),3 Phase, 50 c/s (±3%) , A.C. Supply1500 r.p.m. The Motor shall be TEFC ISI marked as per IS 12615 with latest amendments thereof. The Pump ( model NW -12D of size 150× 150 mm.) shall be horizontal, single stage, split casing, duly ISI marked as per IS-6595/1993 with latest amendments hereof. Pump should be directly coupled with Motor and mounted on a common fabricated M.S. Base frame

3 Q Electromagnetic Star-Delta Starters for 20 HP Motor oil Immserd. IS 60947

500Volt,200Amps Busbar Chamber with copper bars of 30 cm x3.7 cm x0.6cm provided with requisite bolts

Main Switch 415 v 3 v phase for 200 amp TPN, Conforming to IS-60947

4'' Round Projection type Ammeter

4'' Round Projection type Voltmeter

Main Switch 415 v 3 v phase for 63 amp TPN IS-60947

Construction of Water Transmission Arrangement ( Detalis Sheet WTA)

Construction of Pump House ( Detalis Sheet PH)

Internal Wiring of Pump House ( Detalis Sheet IW)

Enerzization of New Major RLI Scheme ( Detalis Sheet Enerzization)

MAMATA USHA ENTERPRISE

AISHI DRILLING AND CONSTRUCTION CO