Malappuram DP Annual Plan (2020-21), Project No. 1726/21, Ambalakkadavu Irrigation Project - Providing Motor Pump set and Electrification

Amount

Supply installation testing and commissioning of suitable size Kirloskar or similler make 3 HP Three Phase Vacuum Pump with Coupled Motor for proposed 75 HP motor pump set and test run etc as reuired

Supply installation testing and commissioning of Kirloskar or similler make 75 HP or nearest size Three Phase DSM MODEL END SUCTION PUMP with 100 CI Impel suitable to site etc as reuired

Supply and commissioning of Sluice Valve 100mm Karathar or similler make

Supply and commissioning of Reflex Valve 100mm Karathar or similler make

Supply and fabrication conveyance and installation of base frame of panel board using 150mm C channel.

Supply and fixing starter suitable for 75HP motot pump of the following ratings soft starter 75HP/55KW 24-580A 380-690V Ac soft starter of model EMXi.115A,3250-252Vac, CTR 110-240vac 3phase control (thyristor controlling) of L7T/eqquivalent make.(excluding GST)

Supply, threading laying and jointing of 150mm dia B class GI pipe with all required accessories as required and giving connections to both ends at pump delivery/suction side

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

Supply and providing heavy duty 'A' section neoprene gasket in the panel board U' section rubber beeding suitable for 1.60/ 2.00 mm sheet

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

Supply and providing copper earth bus in the panel board

Supply,installation, testing and commissioning of 160A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with thermal magnetic based release with overload setting of 80 - 100% having adjustable OL & SC in the existing panel as required

MCCB Accessories - Supply and fixing one number earth fault Relay up to 250A to 400A with CBCT.

MCCB Accessories - Supply and fixing rotary handle, Direct type (including BUC handle with door interlock ) in the existing MCCB of rating up to 250 A

Supply and fixing Danger notice board of size, 125 x 75 mm

Supply and fixing Digital Multifunction meter to read: V, A, F, PF-3 phase accuracy class 1 LED

supply and fixing Red, Green, blue, Yellow, Orange colours LED indicator, AC/DC, as required

P. R. RIJESH