Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.9 LAccepted-AOC PARUTHIYEZHATHU HOUSE MULAVUKAD P O NORTH ERNAKULAM 682 504 | ERNAKULAM | KERALA | 682504 | ₹7.9 L Quoted ₹8.6 L | L1 | Accepted-AOC Being Lowest Tenderer |
| 2 | L2₹8.8 LRejected-Finance 26 2579 THEVARA PO KOCHI ERNAKULAM KERALA 682013 | KOCHI | ERNAKULAM | KERALA | 682013 | ₹8.8 L | L2 | Rejected-Finance Other than Lowest Tenderer |
| 3 | L3₹9.4 LRejected-Finance | ₹9.4 L | L3 | Rejected-Finance Other than Lowest Tenderer |
| Sl No | Description | Qty | Unit | AR Traders L2 | GOLDEN EYE BUILDERS L1 | 3 VOLT ELECTRICALS ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Material and labour for repair to unserviceable street/security/solar light fittings of LED, of any wattage and size by taking down from poles/buildings after disconnecting the electric connection, replace the unserviceable drive, PVC connector etc. cleaning, re-fixing the light fittings at its original position after rectifying the defects and connecting to street light feeder including testing complete all as specified and as directed.
Note for item No1:
1) Replacement of parts will be measured and paid separately as supply only
2) The cost of labour and tools required for replacement of parts shall deemed to be included in the unit rate quoted by the contractor. | 241 | Each Job | 300 ₹72,300 | 70 ₹16,870 | 500 ₹1.2 L |
| 2.00 | Supply only for renewal of LED driver suitable for LED street light/flood lights 25 to 60 watts 230V compatible with LED Luminaire at site in all aspects complete all as specified and as directed. | 40 | Each | 250 ₹10,000 | 340 ₹13,600 | 1,000 ₹40,000 |
| 3.00 | Supply only for renewal of LED driver suitable for LED street light/flood lights 70-90 watts 230V compatible with LED Luminaire in all aspects complete all as specified and as directed . | 35 | Each | 320 ₹11,200 | 435 ₹15,225 | 1,200 ₹42,000 |
| 4.00 | Supply only for renewal of LED driver suitable for LED street light/flood lights 100-150 watts 230V compatible with LED Luminaire at site in all aspects complete all as specified and as directed. | 31 | Each | 360 ₹11,160 | 610 ₹18,910 | 1,500 ₹46,500 |
| 5.00 | Supplyand fixing for renewal of LED post top made in die-cast aluminium bottom housing and spun aluminium top reflector with decorative PMMA opal and Clear douser and IP65 protection at site in all aspects complete all as specified and as directed.
Make :Bajaj, ARIAN cat part No. BGCTN 45W LED WH or equivalent as approved by GE. | 4 | Each | 6,500 ₹26,000 | 5,650 ₹22,600 | 9,000 ₹36,000 |
| 6.00 | Supply only for renewal of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, all as specified and as directed. | 40 | Each | 1,800 ₹72,000 | 2,600 ₹1.0 L | 1,000 ₹40,000 |
| 7.00 | Supply only for renewal of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with aerodynamically designed for all weather conditions with excellent thermal management complete, all as specified and as directed.
Make:-Crompton/ Philips/Havells. | 34 | Each | 2,000 ₹68,000 | 1,900 ₹64,600 | 2,100 ₹71,400 |
| 8.00 | Supply only for renewal of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. | 27 | Each | 3,000 ₹81,000 | 2,700 ₹72,900 | 3,200 ₹86,400 |
| 9.00 | Supply only for renewal of LED flood light 50 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and as directed.
Make- Phillips/Crompton cart part Np. CFS-504-50-57-60D sl-gl-NSG or equivalent. | 25 | Each | 3,500 ₹87,500 | 1,850 ₹46,250 | 4,000 ₹1 L |
| 10.00 | Supply and fixing in renewal of energy saving LED Garden light of 9 W LEDs made up of aluminium casting with acrylic diffuser for soft illumination effect and the bollard trunk is of black powder coated complete all as specified and as directed | 5 | Each | 3,500 ₹17,500 | 3,450 ₹17,250 | 700 ₹3,500 |
Updated dates
Tender Value
₹12.8 L
EMD Value
₹25,500
Closing Date
5 Jan 2026, 11:00 amClosed
GE FORT KOCHI
GARRISON ENGINEER MILITARY ENGINEER SERVICES GE FORT KOCHI -682 001
REPAIR/ REPLACEMENT OF STREET/ SECURITY LIGHTS, TIMER SWITCHES AND CONNECTED MISC WORKS AT SMA RAMESWARAM UNDER GE FORT KOCHI
2025_MES_742501_1
8301/E8_GE_FORT_KOCHI
Open Tender
Electrical and Maintenance Works
270 days
FORT KOCHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE FORT KOCHI
₹25,500
Yes
23 Feb 2026
2 Dec 2025
12 Jan 2026
2 Dec 2025
5 Jan 2026
16 Dec 2025
Amount
Material and labour for repair to unserviceable street/security/solar light fittings of LED, of any wattage and size by taking down from poles/buildings after disconnecting the electric connection, replace the unserviceable drive, PVC connector etc. cleaning, re-fixing the light fittings at its original position after rectifying the defects and connecting to street light feeder including testing complete all as specified and as directed. Note for item No1: 1) Replacement of parts will be measured and paid separately as supply only 2) The cost of labour and tools required for replacement of parts shall deemed to be included in the unit rate quoted by the contractor.
Supply only for renewal of LED driver suitable for LED street light/flood lights 25 to 60 watts 230V compatible with LED Luminaire at site in all aspects complete all as specified and as directed.
Supply only for renewal of LED driver suitable for LED street light/flood lights 70-90 watts 230V compatible with LED Luminaire in all aspects complete all as specified and as directed .
Supply only for renewal of LED driver suitable for LED street light/flood lights 100-150 watts 230V compatible with LED Luminaire at site in all aspects complete all as specified and as directed.
Supplyand fixing for renewal of LED post top made in die-cast aluminium bottom housing and spun aluminium top reflector with decorative PMMA opal and Clear douser and IP65 protection at site in all aspects complete all as specified and as directed. Make :Bajaj, ARIAN cat part No. BGCTN 45W LED WH or equivalent as approved by GE.
Supply only for renewal of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, all as specified and as directed.
Supply only for renewal of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with aerodynamically designed for all weather conditions with excellent thermal management complete, all as specified and as directed. Make:-Crompton/ Philips/Havells.
Supply only for renewal of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
Supply only for renewal of LED flood light 50 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and as directed. Make- Phillips/Crompton cart part Np. CFS-504-50-57-60D sl-gl-NSG or equivalent.
Supply and fixing in renewal of energy saving LED Garden light of 9 W LEDs made up of aluminium casting with acrylic diffuser for soft illumination effect and the bollard trunk is of black powder coated complete all as specified and as directed
Supply and fixing in renewal of SMC junction box size of 300x200x105 mm fixed on pole including provision of MCB SP 20 Amps fixed on rail inside box with proper hinges locking arrangements with provision of clamping accessories complete including taking down old unserviceable item all as specified and as directed.
Supply and fixing of 2 core, 6 Sqmm PVC flat weather proof aluminum cable including taking down old unserviceable cable of any size complete all as specified and as directed.
Supply and fixing of 2 core, 10 Sqmm PVC flat weather proof aluminum cable including taking down old unserviceable cable of any size complete all as specified and as directed.
Material and labour for applying a coat of cement base paint to PCC Pole 9 metre long and writing pole number with synthetic enamel paint (White with black base) including applying a coat of aluminium paint to FI Clamps/ Brackets and applying oil paint black and yellow colour alternatively up to 1.2 mtr from ground complete all as specified and as directed.
Material and labour for preparation of old steel surfaces over 10cm width or girth not otherwise described and applying a coat of synthetic enamel paint to steel tubular pole complete all as specified and as directed.
Supply and fixing in repairs PVC insulated 3 core copper conductor cable of size 1.5 Sqmm sheathed 1100 volts including PVC conduit pipe conforming to IS 694 from junction box to street light fitting, all as specified and as directed.
Supply and fixing in repairs GI bracket for RCC Pole, made out of GI pipe 25/32 mm dia medium grade, 1.5 mtr long bent to shape and fixing on poles with MS clamps of suitable sizes etc. complete, all as specified and as directed.
Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for laying /removing of cable/ erection of poles in Soft/ loose soil all as specified and as directed.
Material and labour for riddled sand for cable cushioning in trenches all as specified and as directed. Note: For the purpose of payment punned thickness of sand cushioning will be measured and paid.
Supply and lay sub class "B" burnt bricks of size 23x11.5x7.5 cm, laid length of brick perpendicular to length of cable complete all as specified and as directed.
Material and labour for returning and filling in of soil including spreading levelling, watering and ramming in layers not exceeding 25 cm complete all as specified and as directed.
Material and labour for removing excavated soil to a distance not exceeding 50 metre and not exceeding 1.5 metre above the starting point, and depositing where directed complete all as specified.
Material and labour for straight through joint, outdoor type 1100 volts grade, heat shrinkable type suitable for 4/3.5 core ,10 sqmm to 25 sqmm LT, XLPE cable and testing after jointing including taking down the old straight through joint complete all as specified and as directed.
Material and labour for PCC (1:3:6) ,type C-1,(using 20 mm graded stone aggregate ) as in coping and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and as directed.
Material and labour for demolition of cement concrete unreinforced in ground floors and pavings not exc 15 cm thickness (below or above ground level) for laying UG cable or any other purpose complete all as specified and as directed
Supply and fix in repairs indicating lamps LED type set (R,Y,B) all as specified and as directed.
Supply and fixing XLPE insulated PVC sheathed armoured with multistranded aluminium conductor cable having cross sectional area as follows1100-volt grade, heavy grade conforming to IS :7098 (Part 1) laid in trenches/Ducts or passing through pipes or fixing on poles etc. complete all as specified and as directed. Note : Necessary earth works sand cushioning cable protection cover GI pipe etc. will be measured and paid separately under relevant items.
10 sqmm 2 core cable
16 sqmm 4 core cable
25 sqmm 4 core cable
Supply and fixing 40 mm dia GI pipe light grade for cable protection including taking up of old unserviceable pipe all as specified and as directed.
Material and labour for road cutting not exceeding 1.0 M width and 1.0 M depth including excavation, returning, filling in, spreading, levelling, well ramming in layers, soling with broken boulders / stones, suitable size coarse aggregate and making good the surface at par with the existing surface complete all as specified and as directed. Notes: (i) Actual executed depth, width and length of road shall be measured.
Material and labour for taking down existing unserviceable UG cable all as specified and as directed.
Material and labour for taking down and re-fixing carefully and keeping in safe custody of street light fitting of wattage and fixing back on any other pole including providing necessary fitting, complete all as specified and as directed.
Supply and fixing in repairs hot dip galvanized single arm bracket on steel tumbler poles complete all as specified and as directed. Make :- Crompton graves/ Philips or equivalent as approved by GE.
Supply and fixing in repairs hot dip galvanized double arm bracket on steel tumbler poles complete all as specified and as directed. Make :- Crompton graves/ Philips or equivalent as approved by GE.
Supply and fixing factory made and Outdoor type powder coated CRCA sheet 1.6 mm thick suitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system with provision of programmable timer switch for street lights (digital timer setting with monsoon/summer/winter etc) with three phase contactor 20 amps , 10 amps MCB TPN including taking down the old complete all as specified and directed.
Supply and fixing inrepairs street light timer box of Max 6 KW ,32 Amps TP contactor MCB 40 Amps TPN digital 24 Hrs complete all as specified and as directed. Make : Havells/Bajaj or equivalent
Supply and fix in repairs 3 Pole Contactor up to 40 Amps capacity, suitable for existing street light pole control panel all as specified and directed.
AR Traders (BID ID -3511727)
3 VOLT ELECTRICALS ENTERPRISES (BID ID -3505603)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.15 MB
BOQ_831457.xls
BOQ • 0.38 MB
8301Tenderdocu.pdf
Tender Documents • 1.09 MB
Download all tender documents and submit your bid