MISC REPAIRS INCLUDING PAINTING TO CHARPOY MS TUBING AND TABLES UNDER GE MISAMARI

Amount

M&L for MIDDLE STIFFENER made out from Mild Steel Square Tube/Pipe 25x25mm of 1.6mm wall thickness, adjusting existing 2 No. Stiffeners and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. CWE/TEZ/04 & FD/MAP-II/01 including taking out unserviceable Foot Rest Board, complete all as specified and as directed.

M&L for Plywood TOP 12mm thick BWR grade confirming to IS-303, ISI marked and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP & CHARPOY IP WITH HARD TOP as shown on Drawing No. CWE/TEZ/04 & FD/MAP-II/01 including taking out unserviceable Plywood Top, complete all as specified and as directed.

M&L for welding of extra 4 nos Mild Steel CLIT of size 25x25x6mm with single hole on Short Rails for Support of Plywood Top and fixing to CHARPOY MS TUBING WITH PLYWOOD TOP and fixing as shown on Drawing No. CWE/TEZ/04 & FD/MAP-II/01,including taking out unserviceable Clit, complete all as specified and as directed.

M&L for HEAD SIDE BOARD of CHARPOY MS TUBING WITH PLYWOOD TOP & CHARPOY IP WITH HARD TOP of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. CWE/TEZ/04 & FD/MAP-II/01 including taking out unserviceable Head Side Board, complete all as specified and as directed.

M&L for FOOT SIDE BOARD of CHARPOY MS TUBING WITH PLYWOOD TOP & CHARPOY IP WITH HARD TOP of Prelaminated Particle Board 18/19mm thick, exterior grade, ISI marked and fixing as shown on Drawing No. CWE/TEZ/04 & FD/MAP-II/01 including taking out unserviceable Foot Rest Board, complete all as specified and as directed.

M&L for Complete removing/scrapping old worn out Paint on Steel Surfaces of CHARPOY MS TUBING WITH PLYWOOD TOP & CHARPOY IP WITH HARD TOP (Drawing No. CWE/TEZ/04 & FD/MAP-II/01) by Sand Paper/Scrapper and applying two Coats of Synthetic Enamelled Paint (as approved) by Spray Painting Machine over a coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for TOP of TABLE OFFICE OFFICER STEEL of decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round as shown on Drawing No. FD-84,1003 including taking out unserviceable Top, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84,1003, complete all as specified and as directed.

M&L for DRAWER made out of 1.0mm thick Mild Steel Sheet and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84,1003 including taking out unserviceable Drawer, complete all as specified and as directed.

M&L for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE OFFICER STEEL as shown on Drawing No. FD-84,1003 including taking out unserviceable Central Stiffener, complete all as specified and as directed.

All as per Item No. 10 here in before but for SIDE STIFFENER of TABLE OFFICE OFFICER STEEL.

M&L for LOCK (MAKE : GODREJ) of TABLE OFFICE OFFICER STEEL and fixing as shown on Drawing No. FD-84 & FD-1003 including taking out unserviceable Lock, complete all as specified and as directed.

M&L for removing old worn out PVC Covering from recessed handle of TABLE OFFICE OFFICER STEEL and S&F new PVC covr of best quality as shown on Drawing No. FD-84,FD-1003 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for removing/scrapping old worn out Paint from TABLE OFFICE OFFICER STEEL (Drawing No. FD-84,1003 by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for TOP of TABLE OFFICE CLERK STEEL of decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 6.0 mm thick all round , applying french polish upto the desired finish on beading as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Top, complete all as specified and as directed.

M&L for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, ncomplete all as specified and as directed.

M&L for DRAWER made out of 1.00mm thick Mild Steel Sheet and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, including taking out unserviceable Drawer, complete all as specified and as directed.

M&L for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE OFFICE CLERK STEEL as shown on Drawing No. FD-84, FD-381 & FD-1004, including taking out unserviceable Central Stiffener, complete all as specified and as directed.

All as per Item No.18 here in before but for SIDE STIFFENER of TABLE OFFICE CLERK STEEL.

M&L for LOCK (MAKE : GODREJ) of TABLE OFFICE CLERK STEEL and fixing as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Lock, complete all as specified and as directed.

M&L for removing old worn out PVC Covering from recessed handle of TABLE OFFICE CLERK STEEL and S&F new PVC covr of best quality as shown on Drawing No. FD-84, FD-381 & FD-1004 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for removing/scrapping old worn out Paint from TABLE OFFICE CLERK STEEL (Drawing No. FD-84, FD-381 & FD-1004) by Sand Paper/ Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for TOP of TABLE 3'X2' WITH and WITH OUT DRAWER of decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading as shown on Drawing No. FD-1007/1008 including taking out unserviceable Top, complete all as specified and as directed.

M&L for for Welding of Broken Leg with Mild Steel Square Pipe of size 25mm (as required) for TABLE 3'X2' WITH and WITH OUT DRAWER as shown on Drawing No. FD-1007/1008, complete all as specified and as directed.

M&L for DRAWER made out of 1.6mm thick Mild Steel Sheet and fixing to TABLE 3'X2' WITH DRAWER as shown on Drawing No. FD-1008, including taking out unserviceable Drawer, complete all as specified and as directed.

M&L for CENTRAL STIFFENER made out of Mild Steel Square Pipe of 25mm and fixing to TABLE 3'X2' WITH and WITH OUT DRAWER as shown on Drawing No. FD-1007/1008, including taking out unservice-able Central Stiffener, complete all as specified and as directed.

All as per Item no. 26 here in before but for SIDE STIFFENER of TABLE 3'X2' WITH and WITH OUT DRAWER, complete all as specified and as directed.

M&L for LOCK (MAKE : GODREJ) of TABLE 3'X2' WITH and WITHOUT DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Lock, complete all as specified and as directed.

M&L for Mild Steel HANDLE of TABLE 3'X2' WITH DRAWER and fixing as shown on Drawing No. FD-1008 including taking out unserviceable Handle, complete all as specified and as directed.

M&L for removing/scrapping old worn out Paint from TABLE 3'X2' WITH and WITH OUT DRAWER (Drawing No. FD-1007/1008) by Sand Paper/ Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for TOP of TABLE DINING ORS of Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 5.0 mm thick all round, applying french polish upto the desired finish on beading, as shown on Drawing No. FD-165(M) including taking out unserviceable Top, complete all as specified and as directed.

M&L for Mild Steel Square Pipe of size 25mm, 1.0mm thick as LEG having length from 300mm to 500mm and fixing/ welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), including taking out unserviceable Leg, complete all as specified and as directed.

M&L for Mild Steel Square/Round Pipe of size 25mm, 1.0mm thick as LONG RAIL and fixing/welded to TABLE DINING ORS as shown on Drawing No. FD-165(M), including taking out unserviceable Long Rail, complete all as specified and as directed.

All as per Item No.33 here in before but for SHORT RAILof TABLE DINING ORS, complete all as specified and as directed..

All as per Item No.33 here in before but for SIDE STIFFNER of TABLE DINING ORS, complete all as specified and as directed..

All as per Item No.33 here in before but for CENTRAL STIFFNER of TABLE DINING ORS, complete all as specified and as directed..

M&L for Complete removing/scrapping old worn out Paint from TABLE DINING ORS (Drawing No. FD-165(M) by Sand Paper/Scrapper and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M&L for TOP(Sixe 900mmX562mm) of TABLE COMPUTER of made out of Decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 6.0 mm thick all round as shown on Drawing No. TP/FD/E6/MAP/03 including taking out unserviceable Top, complete all as specified and as directed.

M&L for KEYBOARD TRAY of TABLE COMPUTER made out of Decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 6.0 mm thick all round alongwith telescopic channels of best quality as shown on Drawing No. TP/FD/E6/MAP/03 including taking out unserviceable Keyboard Tray, complete all as specified and as directed.

M&L for MOUSE TRAY of TABLE COMPUTER made out of Decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 6.0 mm thick all round all round alongwith telescopic channels of best quality as shown on Drawing No. TP/FD/E6/MAP/03 including taking out unserviceableMOUSE Tray, complete all as specified and as directed.

M&L for CPU STAND of TABLE COMPUTER made out of Decorative Prelaminated MDF Board 18/19 mm thick, exterior grade ISI marked (MAKE : GREEN PLY/CENTURY), providing Teak Wood Beading 6.0 mm thick all round all round alongwith telescopic channels of best quality as shown on Drawing No. TP/FD/E6/MAP/03 including taking out unserviceable CPU STAND, complete all as specified and as directed.

Supply and Fix rectangular PVC SHOE superior quality (as approved) fixing to TABLE COMPUTER as shown on Drawing No.TP/FD/E6/MAP/03 including taking out unserviceable Shoe, complete all as specified and as directed.

M&L for preparing old steel surfaces of RACK STEEL 6 TIER (Drawing No. FD-1038/106/129) by Sand Paper/Scrapper, filling with Filling Materials such as Putty, etc. to obtain a smooth surface, removing all dents and bends and applying two Coat of Synthetic Enamelled Paint (as approved) over a coat of red oxide primer, complete all as specified and as directed.

M/S K.K.TRADERS

Ms N D Enterpise

L.BHIMSEN

Markson