Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹49.8 L+₹48,185.25 (0.98%)Rejected-AOC | L2 | Rejected-AOC Not being L1 | |
| 3 | L3₹50.0 L+₹64,913.60 (1.32%)Rejected-AOC | L3 | Rejected-AOC Not being L1 | |
| 4 | L4₹50.8 L+₹1.5 L (3.07%)Rejected-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | VISAKHAPATANAM | ANDHRA PRADESH | 530001 | L4 | Rejected-AOC Not being L1 | |
| 5 | L5₹51.2 L+₹1.8 L (3.74%)Rejected-AOC | L5 | Rejected-AOC Not being L1 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
19 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Naval Depot
Garrison Engineer Naval Depot Industrial Estate Post 104 Area Visakhapatnam 530007
REPAIRS TO SEWAGE LINE AT INS DEGA AND DEGA VIHAR AND REPAIRS TO ROOF VALLEY GUTTER AT NAD V UNDER AGE BR II OF GE ND VISAKHAPATNAM
2023_MES_628654_1
8314/E8
Open Tender
Civil Works
Item Rate
240 days
VISAKHAPATNAM
As per Tender
8 documents required · 8 mandatory
₹500
GE ND VISAKHAPATNAM
₹1 L
Yes
27 Feb 2024
17 Nov 2023
21 Dec 2023
17 Nov 2023
19 Dec 2023
5 Dec 2023
Amount
Schedule 'A' Part -I ( B/R Schedule)
Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep for foundations, etc and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches not exc 1.5m wide and exc 1.5 m and not exceeding 3.00 m deep for foundations, etc and getting out in soft/loose soil complete all as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thickness as in soil complete all as specified and directed.
Removing excavated material /soil to a distance not exceeding 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from PVC and RCC water tanks of capacity 250 to 500 Litres and from mouths of circulating pipes, etc including washing the tank with clean water and applying bleaching powder after removing scales, dirt complete all as specified and directed by the Engineer-in-Charge.
Cleaning and removing all scale and dirt, etc, from PVC and RCC water tanks of capacity 500 to 1000 Litres and from mouths of circulating pipes, etc including washing the tank with clean water and applying bleaching powder after removing scales, dirt complete all as specified and directed by the Engineer-in-Charge.
Taking down cement plaster on brick work or stone masonry walls, etc including raking out joints, hacking for key, scrubbing down with water, etc and removing the debris outside of MOD land complete all as specified and directed.
M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces mixed with and including cement water proofing compound @ 2% by weight of cement, finished even and smooth with out using extra cement complete all as directed.
Demolition of brick work built in cement mortar and removing from site of works complete all as specified and as directed.
M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 for manholes etc complete all as specified and as directed.
M&L brick work with fly ash bricks,straight or curved on plan to any radius in half brick wall built in CM (1:4) all as specified and directed
M&L for brick work with fly ash bricks laid on edge on top surfaces of drains, bedded & jointly in cement mortar (1 : 4) and pointed in cement mortar (1:3) complete all as specified and directed.
M & L for racking out loose brick work joints as in inside vertical inclined surfaces of bricks drains, laid flat and flush pointed the same in cement mortar (1:4) complete all as specified and directed.
M & L for racking out loose brick work joints as in top horizontal surfaces of bricks drains, laid on edges flush pointed in cement mortar (1:4) complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthatic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L in repair Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' of size 150 x 100 mm with necessary fittings complete all as specified as directed.
S&F in repair for cast iron work grade FG 150, for articles not exceeding 5 kg each unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles etc complete all as specified and directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 100mm bore (dia), Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes (except Bed), complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 150mm bore (dia), Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes (except Bed), complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200mm bore (dia), Jointed in Cement Mortar of any description including PCC of Packing and Haunching to Sides of the Pipes (except Bed), complete all as specified and as directed.
M & L for cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggrerate as in bed concrete to drain pipes 100 mm bore including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M & L for cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggrerate as in bed concrete to drain pipes 150 mm bore including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M & L for cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggrerate as in bed concrete to drain pipes 200 mm bore including packing under & haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
S&F 150mm internal dia of reinforced concrete pipes, class NP3, laid and jointed complete with collar all as specified
S&F 200 mm internal dia of reinforced concrete pipes, class NP3, laid and jointed complete with collar all as specified
M&L for repairs holes of rat/mouse to manholes faces/surfaces by making good to wall, PCC benching, drains, channel etc, of section area not exc 150 Sqcm each and depth not exc 25cm each and filling the same with PCC (1:2:4) type B-1 with using 20mm graded stone aggregates and finishing to the surfaces complete all as specified and as directed.
S & F 110mm bore PVC (SWR) soil, waste or rain water pipes single socketed in any length with rubber ring joints fixed to walls with and including MS flai iron rings 40 mmX6 mm etc complete all as specified and directed.
S & F in repair 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
S & F in repair for PVC (SWR) bends any radius 110mm bore with oval access door complete all as specified and directed.
S & F in repair for 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
S & F in repair for 110mm bore PVC (SWR) branch piece double, (double Y) equal or unequal with acess door complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M & L 100mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B 1 (1:2:4) using 20 mm graded crushed stone aggregate complete all as specified and directed.
S & F in repair grating doom 125mm dia with waste hole of PTMT (min wt 40 gms) complete all as specified and directed.
S&F in repair 32mm dia PVC waste pipe for urinal/kitchen sink/WHB including CP waste coupling 32mm dia including taking down old existing pipe complete all as specified and as directed.
Supply & fixed in repair, Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe)complete all as specified and as directed.
Supply & fixed in repair, Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and as directed.
M & L for PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete including demolition of old concrete complete all as directed.
M & L for PCC 1:2:4, type B-2 using 40mm graded crushed stone aggregate as in surface channels and drains etc including demolition of old concrete complete all as directed.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for all complete as specified and as directed.
M & L for Precast RCC 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manholes), shelves including necessary formwork, and the like and set in CM 1:4 etc complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
S & F mild steel work as in hand rails, wind ties, fencing posts and struts, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, securing bolts, posts and struts in fencing, etc and similar work conforming to FE-290 Gde E-165
M & L for TMT bars 10 mm dia and over, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M & L for TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directetd.
Material & Labour for cleaning of Septic Tanks, soakage wells and manholes of any size and capacity by removing the sewage water and sludge and other materials by using Vehicle Mounted automatic sewage suction machine and disposal to out side MD land and cleaning the complete area including making good any damages complete all as directed.
Cleaning of Manholes of any size , type and capacities by using a pressure pump used for sewage cleaning and removing out all waste solid material/ sludge to a borrow pit with in 50 m of the location of manholes and spreading bleaching powder on top and surrounding area of borrow pit and covering with fresh mud and finaly spreading unslaked lime , around the manhole and over the borrow pit complete all as directed.
M&L for keeping sewage lines fully functional by providing services of cleaning of blockages of sewage lines of any dia and depth, manholes of any size and depth, working in foul conditions, cleaning of manholes and sewage lines by mechanical means, flushing with water in sewage lines between successive manholes and keeping the system functional including water closets, floor traps, Nahani traps, gully traps etc, upto final drop/outlet into septic tanks, in the area Under AGE B/R II by providing adequate manpower for attending complaints of sewage cleaning as instructed by concerned JE with complaint slip and report back to the same JE after resolution of complaints including maintaining of the record of complaint slips after getting signature of users, complete all as specified and as directed by Engineer-In-Charge.
Note:- Minimum Two unskilled workers of contractor shall report daily to the JE concerned for noting down of complaints and attending to them, daily at 9 Am including sundays and holidays but if more personals are required to make the sewage line fully functional the contractor shall provide more manpower and the quoted rates shall deemed to be inclusive of the same, the bidders/tenderers are advised to meet with AGE B/R-II to schedule a visit to the site to acess the total requirement of manpower at site and quote their rates accordingly and no claim whatsoever on account of misunderstanding or anything else shall be admissible at any later stage.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Naintial or similar pattern roof covering.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S&F 1.00 mm thick plain pre painted galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed ) with grade of zink coating 275.
M&L for drilling holes upto 12mm dia in plain or corrugated sheets supplied by the Ministry of Defence for fixing only
Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts,all set in stiff white lead, bolt n exc 25mm in length
As per Item No 1.00 above refixing in same plain or corrugated steel sheeting, any gauge etc, complete all as specified and directed.
S&F for rolled mild steel Fe-410-W (Gde-E-250 quality A) for framed work as in doors ,gates of angle or other section with gusset plates, rails,braces etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings also fastening & fixing complete all as specified and as directed.
S&F for 1.60 mm thick mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165
S&F roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle, channel or flat sections) including clits etc conforming to Fe-410-0 or Fe-310-0.
S&F Flat iron of size 40X6 as in wind ties conforming to Fe-290 Gde E-165.
S&F in repair 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, an- choring rod, hasp and staple and one shop coat of primer; erected in position as indi- cated, complete: push pull or manual type gear operated type with bevel gear box and crank handle , complete all as specified.
above item no 13 Extra for wicket door including a 4 lever mild steel safety lock, lockable from both inside and outside (area of wicket door to be only measured)
Material & Labour for repairs and servicing of rolling shutters and removing of worn out components such as hood cover laths ball bearings, helical wire spring, lock plates, brackets, plates, shaft rod, laths, straightening of existing at required places including greasing and refixing in the same location as directed by engineer-in-Charge. Note: Spares required if any shall be measured and paid separately at supply only rates.
Supply only Rolling Shutter Shaft made of MS ERW Pipe, 50 mm bore, Medium Grade, conforming to IS – 1239 complete all as specified and as directed.
Supply only Rolling Shutter Shaft made of MS ERW Pipe, 40 mm bore, Medium Grade, conforming to IS – 1239 complete all as specified and as directed.
Supply only 450mm long Helical Wire Spring made of 7.5mm dia wire complete all as specified and as directed.
Supply only 300mm long Helical Wire Spring made of 6.4mm dia wire complete all as specified and as directed.
Supply only Ball Bearing of size 65mm inner dia suitable for rollong shutters complete all as specified and as directed.
Supply only Ball Bearing of size 50mm inner dia suitable for rollong shutters complete all as specified and as directed.
Supply only Rolling Shutter Hood Cover made of 1.00 mm thick CRCA Sheet, bent to shape to match with existing brackets including MS Angle / Flat Stiffeners complete all as specified and as directed.
Supply only Safety Lever Lock Mild Steel with 4 Levers suitable for rollong shutters complete all as specified and as directed.
M&L for Painting two coats of synthetic enamel paint over a coat of red oxide primer to new steel Surfaces of any description, not otherwise described, over 10cm width or girth.
Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of synthetic enamel paint.
Preparation of old painted surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of Aluminium paint complete all as specified.
Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of Aluminium paint over a coat of Aluminium red oxide, complete all as specified.
M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described and applying one coat of Synthetic enamel paint over 10 cm width or girth complete all as specified and directed.
M&L for complete removal of existing treatment on walls and applyingtwo coats of fire resistant paint over a coat of primer including wall putty/white cement whereever required to fill the wall cracks/holes complete all as specified and as directed.
Rendering 10mm thick on fair faces of brick work or concrete sur?facesin cement mortar 1:6 and finishe even and smooth without using extra cement complete all as specified and as directed.
M&L for 5mm rendering thick in CM (1:3) on ceiling sufaces, finished even & smooth (without using extra cement), complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper, white or tinted and including applying of Birla white wall care putty complete all as specified and as directed.
M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper, white or tinted and including applying of Birla white wall care putty complete all as specified and as directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
M & L for preparing old surface and appllying one coats of weather proof exterior paint and including filling of holes and cracks with putty on wall complete all as specified and directed.
Demolition of un-reinforced concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for 100 mm thick Cement concrete type C-2, 1:3:6 (using 40 mm graded granite stone aggregate) as in flooring /hard standing etc complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metres and every change of direction and filling the same with & including bitumen and sand 1:3 by weight of grade 'A' complete with and including necessary form work etc complete all as specified and as directed.
Removing the existing roof treatment completely and roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc then Brushing neat cement slurry with 3 Kg of cement per Sqm,then Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair without using extra cement then supplying testing and applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application including coating the APP membrane surface with water based bituminous primer of blow bitumen of 85/25 at 1.2 Kg/Sqm both at bottom and top of the membrance (Three layers of bitumen primer one on plastered surface and two on APP membrane) and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified and directed.
Taking down eaves gutters & rain water pipes ( any size or pattern) including all fittings , heads, shoes , bends, swan- necks, etc including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings & accessories) .
S&F 110 mm dia bore PVC (SWR) bends .
Dismantaling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
M& L for PVC false ceiling consisting of 600mm X 600mm, 5mm thick plain PVC sheet of 600/ Cum density manufactured by an ISO 9000 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x1" (25 x 25mm, 19gauge or 1 mm thick) in square pattern of grid sizes of 2' x 2'(600x600mm). the aluminium framework is supprted from the ceiling with the help of 'J' hook and GI wire/ 6mm MS aluminium L-section of size 1" x1" (25x25mm) angles etc. complete all as specified and directed.
M&L for cutting/chipping the spalled loose concrete of RCC structural member and trimming, cleaning the surfaces of any thickness to receive gunitting/ plastering preparing surfaces of any thickness to receive epoxy primer to all steel surface as antirust agent and welding steel wire fabric /mesh of aperture 75mm and 2mm dia of wire to existing reinforcemen, applying a coat of Nito Bond AR of M/s Fosroc chemicals or M/s Sika India Pvt Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostic India Pvt Ltd as per manufacturer instruction and providing pressure guiniting average 40mm thick at a pressure of not less than 6 Kg/Sqm in CM 1:3 duly mixing the mortar with and including polycrete admixture of M/s Sika India Pvt Ltd or M/s Choksey Chemicals Pvt Ltd or M/s Bostic India Pvt Ltd @5% of weight of cement, finishing the surface rough and finally rendering with 15 mm thick in CM 1:4 and finishing the top surface even and smooth without using extra cement conforming to proper geometrics to match with the existing surface including providing double scaffoldingto the buildings/ structures upto four storey / 15 metre height and safety measures as required and removal of the same on completion and disposal of demolished material/ debris outside MD land complete all as specified and as directed-in-charge. and removal of the same on completion of the work.
TECHNO SOFT SOLUTIONS
N V S S K N SIVA PRASAD
RAJASHEKHAR ENTERPRISES
M/s.G.KRISHNA RAO
M/S SRI VENKATA BHAVANI CONSTRUCTIONS
M/s SIRI CONSTRUCTIONS
Sai Sri Constructions
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .