MAINT AND MISC CIVIL REPAIR WORKS TO CERTAIN OTM AND MD ACCN AT K AREA ZIRAKPUR AND SEC 28/29D UNDER GE CHANDIGARH

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5 sqm each and removing from site complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out 5mm plain colour PVC sheet reinforced with MS square tube made as per specification and drawing.

M&L Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thicks with partical board core), with 2, 4, or 6 raised paneldesign with 2mm thick MouldedPVC Sheet on the front face &2mm plain colour PVC sheet onback face, supplying & fixing inframe at site as per specification& drawing.

S&F for 100 mm stainless steel butt Hinges for PVC doors all as specified and directed

S&F 150 mm aluminium handles, cast type, anodised all as specified & directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed .

Demolition of brick work built in cement mortar including all quoins arches pillars complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks in cement mortar, straight or curved on plan exc 6m mean radius, built in in CM 1:6 all as specified.

M&L for old size bricks with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cement mortar 1:4 in walls ,complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete in any position at any height (reinforcement cut as required to facilitate demolition) and removing rubbish out of MD land complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 , type B-1(using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, shelves and the like complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 , type B-1(using 20mm graded crushed stone aggregate) as in chhajja complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished of concrete flat surfaces complete all as specified and directed.

Use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide height (upto 2nd floor) complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia & over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and building with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for installation of rebar by using hilti hammer drill with carbide drill bit, Chemical dispensing gun for inserting RE-500V3 Chemical upto minimum depth of (10 x dia of bar ) as in chajah beam ,lintel columns slab and paraper at any height before inserting an anchor bar ,hole must be free from dust debris , water ice and oil grease etc complete all as per manufacture instruction Note : (i) Reinforcement will be measured and paid separtely (ii) Rates are inslusive of from work shuttering and safely measures dia of bar 10 mm complete all as specified and directed

Repairing the edges of concrete chajjas, facias, slabs, columns & the like by providing PCC (1:2:4) type B-0 including all necessary form work and/or provision of rendering 15 mm thick (average thickness) in cement mortar (1:3), after applying a coat of cement slurry @ 3 kg/ Sq. m of surface, finished even and fair, surface area not exceeding 450 mm wide, in patches including taking down swoolen/damaged plaster or concrete complete all as specified.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid,bedded and pointed in any mortar and removing rubbish out of MD land complete all as specified

M&L for 20 mm thick granite slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

M&L for 18-20mm thick machine cut kota stone slab flooring over 15 mm thick cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.

All as per item No.20 above but in skirting /dado etc over 10 mm thick rendering in cement mortar (1:4) complete all as specified.

Dismantling of floor hearth or wall tiles including cement mortar but not backing and removing rubbish out of MD land complete all as specified and directed.

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. complete all as specified.

M&L for coloured non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (Premium quality), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) , complete all as specified and directed .

All as per ser item No 24 but in vertical surfaces such as skirting over and including 10 mm thick rendering in CM (1:4) , complete all as specified and directed .

M&L for coloured non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) , complete all as specified and directed .

M & L for coloured ceramic glazed ceramic tiles in vertical surface 450X 300X 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade/colour of tiles,over and including 10 mm thick rendering in CM (1:3) , complete all as specified and directed .

M&L for Renewing glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles including screed bed or bedding layer of 15mm thick in CM (1:6) , complete all as specified and directed .

Taking up or down 15 mm bore steel water tubing and S&F for 16mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all connected fittings , (elbow, socket, reducers etc.),including making good as existing surfaces complete all as specified and directed .

Cutting chases through brick walls pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps , cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing, (Girth n exc 10 cm) complete all as specified and directed .

S&F in repair 16mm CPVC SDR -11 brass elobw complete all as specified and directed

S&F in repair 16mm CPVC SDR -11 brass Teecomplete all as specified and directed

S&F in repair 16mm CPVC SDR -11 Male Brass Threaded Adaptor MTA/MBTAcomplete all as specified and directed

S&F in repair 16mm CPVC SDR -11 Female Brass Threaded Adapto RFTA/FBTA complete all as specified and directed

S&F in repair 16mm CPVC SDR -11 Tank Adaptor complete all as specified and directed

S&F in repair 16mm CPVC SDR -11 Union complete all as specified and directed

S&F in repair 16mm CPVC SDR -11 Ball Valve complete all as specified and directed

Taking up or down 20mm bore steel water tubing and S&F for 20mm dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl all connected fittings (elbow, socket, reducers etc.), complete all as specified and directed .

S&F in repair 20mm CPVC SDR -11 brass elobw complete all as specified and directed

S&F in repair 20mm CPVC SDR -11 brass Teecomplete all as specified and directed

S&F in repair 20mm CPVC SDR -11 Male Brass Threaded Adaptor MTA/MBTAcomplete all as specified and directed

S&F in repair 20mm CPVC SDR -11 Female Brass Threaded Adapto rFTA/FBTA complete all as specified and directed

S&F in repair 20mm CPVC SDR -11 Tank Adaptor complete all as specified and directed

S&F in repair 20mm CPVC SDR -11 Union complete all as specified and directed

S&F in repair 20mm CPVC SDR -11 Ball Valve complete all as specified and directed

Dismantling of PVC /cast iron pipes 75/100mm fixed in any position complete all as specified and directed .

S&F PVC (SWR) 110mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with PVC clamp complete all as specified and directed.

S&F PVC (SWR) 75mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with PVC clamp complete all as specified and directed.

S & F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F 110 mm bore PVC (SWR) bend of any radius with acess door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend of any radius with acess door complete all as specified and directed.

S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed .

Dismantling Asbestos cement (corrugated, semicorrugated,plain etc.) sheets in roof coverings complete all as specified and directed.

S & F 0.50mm thick pre painted galvalume aluminium zinc coating GI based corrugated steel sheeting having 550 Mpa as in roof covering/cladding to walls fixed with self tapping screws as specified

S & F 0.50mm thick pre painted galvalume aluminium zinc coating GI based plain steel sheeting having 550 Mpa as in roof covering/cladding to walls fixed with self tapping screws as specified

S&F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etccomplete all as specified and directed.

S&F MS rolled sections as in roof trusses (framed), trussed,purlins, rails and fastenings and bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. similar work conforming to Fe-410-W(Gde-E-250) ,complete all as specified and directed .

Dismantling wrought iron or mild steel work (incl connected wooden posts in stair cases) of any description not otherwise provided for

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets.

Supply and fixing in repair Mineral Fiber Ceiling Tile 16mm thick with 15mm Grid system interlocking UNI T15 Pro T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450mm centre to centre & 40 mm long dry wall S.S. screws. Then 16mm thick Impression or equivalent Mineral fiber ceiling panel having FLB edge of size 595x595 shall be placed into the above grid of size 600x600mm. This ceiling panel confirms to ASTM E84 surface burning characteristics (Class A, Flame Spread: 25 & Smoke developed: 50). The Ceiling panel provides NRC: 0.6, CAC minimum: 33, minimum Light Reflectance: 84%, minimum Recycled Content - 45%, Reaction to fire Class 0/Class 1 as per BS 476 Pt - 6 & 7 & can withstand Relative Humidity up to RH 99% (limiting conditions –Max 49°C/99%RH). Contains a broad-spectrum antimicrobial additive on the face and back of the panel that provides resistance against the growth of mold and mildew confirming to ASTM D3273.

Material & Labour for providing and fixing stainles steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement , complete all as specified and directed.

S&F in repair kitchen Plate Rack stainless steel having size 750mm x900mm x250mm (approx) incl fixing to walls with fasteing screws, rubber/PVC beading /capping complete to sustain utensils weight upto 8-10 Kg, complete all as specified and directed.

Demolition of cement concrete as in ground floors and in paving n. exc 15cm thick above ground floors and removing rubbish out of MD land complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6 ) type C-2 using 20 mm graded stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) P or S type white with seat cover white (exluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed .

S&F in repairs Belmonte Ceramic Vitreous China wash basin oval shape Table Top/over Counter vessel 500 x 380 x 120mm with CP waste coupling & pipe complete all as specified and directed .

S&F in repairs 10 ltr capacity PVC vlaveless syphonic action type flushing cistern low level,white with inlet ball valve,float and handle including brackets, complete all as specified and directed.

S&F in repairs 15mm dia bib tap, chromium plated brass, fancy type with crutch or butterfly handle, screwed down complete all as specified and directed.

S&F in repairs 15mm dia CP Center hole mixer (for hot and cold water), screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore CP angle cock/ Concealed Stop valves fancy type,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L in repairs brass chromium plated shower rose 125mm size with or without swivel joints with shower arm 15 mm size, 195mm long with bend of 45 degree with flange , including fixing to steel pipe or union complete all as specified and directed.

S&F S&F in repairs chromium plated towel rail 60 cm long 20mm dia with flanges complete all as specified and directed.

S&F in repair stainless steel sink, 1.00mm thick for kitchen overall size 495mm x 420mm with bowl size 410mm x330mm x 160mm including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste coupling, PVC waste pipe, washers, connecting union etc complete all as specified and directed.

S&F in replacement PVC connection 15mm size with PTMT Nuts of length 450mm complete all as specified and directed

S&F in repair 20mm dia SS 304 curtain rod including brackets, decorative balls/caps on both ends of curtain rods with comp fittings complete all as specified and directed.

S&F in repair 15 mm stainless steel paul toilet seat /commoder jet sprey complete set all as specified and directed

S&F in repair glass corner shelf, one set comprises of three pieces of corner shelf fancy type (small to large) 250 x 250mm, 200 x 200mm, 150 x 150mm) with all fittings,complete all as specified.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws,complete all as specified.

Dismantling of PVC water storage tanks capacity 1000 ltr complete all as specified.

S&F rotational moulded polyethylene (tripple Layer) water storage tanks 1000 Ltr capacity (cylindrical vertical with closed top) hoisted including tank Adoper inlet and outlet and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

M&L for framed work as in doors or gates of angle of any section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittngs (exclussive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified.Fe-290,E-165

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.5 sqm but n exc 4.00sqm each and removing from site complete all as specified and directed.

S&F 125 x 60mm pressed steel frames for doors,windows with one or more rebates incl necessary fixing lugs,hinges lock, strike plate etc,complete all as specified and directed.

S&F 105x60mm pressed steel frames for doors,windows with one or more rebates incl necessary fixing lugs,hinges lock, strike plate etc complete all as specified and directed.

M&L plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate, for as a back filling the chowkats, including necessary form work and weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-charge

M&L for providing cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) in blocks for fixing hold fasts & pressed steel frames for doors including necessary form work complete all as specified and directed

S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type with both faces are covered with decorative face veneer with lipping/frame to match, all as specified & directed by Engr-in-Charge.

S&F 35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composit) having high natural fiber content 25 to 30% wood colour sheet with density not less than 500Kg/Cum and the weight of sheet 1 Sqm should be 11Kg manufactured by ISO 9001/2015 certified compnay shoud be 100% water proof, termite proof, fire retardent manufactured by single layer extrusion process with excellent screw hold capacity and shore D hardness complete all as specified & directed by Engr-in-Charge.

M&L for 1st class softwood beads, straight (any size) for edging of MDF boards complete all as specified.

M&L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified & directed by Engr-in-Charge.

S&F Stainless steel wire cloth.0.36mm nominal dia of wireand average width of aperture 1.40mm and fixed withstainless steel wire staples

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete by means of welding or screwing down complete all as directed.

S & F Aluminium anodised hasp and staple 100 mm , safety type, brass with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed .

S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified & directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wooden surfaces exc 10cm girth or girth incl preparation of wooden surfaces complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/zinc chrome primer, including Cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/ zinc chrome primer, including cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F 3.00 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L mild steel work in framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165

M&L for applying two coats of synthetic enamel paint over a coat of red oxide in new steel or iron surfaces exc 10cm girth or girth incl preparation of new surfaces complete all as specified and directed.

M&L for preparation of old distempered surfaces by brooming or by steel wire brushing, scrapping down snow soot,moulds, moss and efflorescent salts and treading oil and greasy spots, not otherwise of walls including corinces pillars etc and applying one coat of Oil Bound Distemper, all as specified and directed.

M&L rendering 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces, including taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc and removing rubbish out of MD land complete all as specified and directed.

M&L for preparation of new undecorated surfaces and applying three coat of white wash on ceiling,complete all as specified and directed.

M&L rendering 15mm thick in CM (1:6) on fair faces with out extra cemet of brick work or concrete surfaces, including taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc and removing rubbish low lane area n. exc 5 km and as decided by Engr-in- charge.

M&L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over and including 1mm thick wall care putty, completed all as specified and directed .

Taking down wooden shutters exc 1.5 sqm but n.exc 4.00 sqm each and re-fixing the same after repairing the shutter , complete all as specified and directed

Disconnecting existing tank (500 to 1000 ltr) setting a side (or lowering if required ) for repairs ,cleaning etc, and hosting if required reconnecting and re-fixing in position (cleaning repair complete all as specified and directed

S&F for 100 mm PVC butt Hinges for PVC doors complete all as specified and directed.

Taking down AC rain water pipe any size or pattern incl all fittings heads, shoes, bends. Swan necks, etc including cleaning for refixing or removing to store.

Dismantling of PVC water storage tanks capacity 500 ltr complete all as specified and directed.

S&F rotational moulded polyethylene (tripple Layer) water storage tanks 500 Ltr capacity (cylindrical vertical with closed top) hoisted including tank Adoper inlet and outlet and fixed in position all as specified in SSR Part-I, complete all as specified and directed.

S&F 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge

M&L for Endura digital tiles, heavy duty ,for high traffic 300 x300 mm x 10mm thick, non skid acid and scratch resistance, fixed with 3 mm spacer & filled with grout breaking strength not less than 1700N as in floor jointed in neat cement slurry ,including 15mm thick screed bed cement mortar 1:6 and dismantling of tiles complete all as specified and as per direction of manufacturer’s instruction complete all as specified and directed.

S&F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long (S & F Diameter of neck Exc 12 n exc 20mm)

His Construction Company