WBPWD/EE/BED/44/e-IT of 2018_19

Amount

Dismantling the existing fittings & fixture, wiring, SPNBDB, switch board etc. & mending good damages to the original finish as per direction of EIC.

S&F 6 way VTPN PBDB in SS enclosure (IP-43 protection) double door (Legrand/ Siemens/ similar type) comprising of neutral link, earthing attachment on wall by iron leg and mending good the damages to original finish incl. interconnection. Incoming-415V, 36KA, 4 FP 125A, MCCB (Legrand / Siemens/ similar type) ----1no Outgoing- 415V, 10KA, 63A TP MCB (Legrand / Siemens/ similar type) ----6 nos.

S/F double door sheet steel (16 SWG),powder coated cable end box for 8 way TPN DB horizontal/ vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment

S/Laying 1.1 KV Gr. XLPE/Ar Al. cable on wall incl. S/F MS saddle with earthing attachment by 2 nos 10 Swg GI (Hot dip ) wire making holes mending good the damages as per GS. (i) 4 core 95 sq. mm

(ii) 4 core 35 sq. mm

Supply & fixing 415V 8 way 16-32 A per way TPNMCB DB with SS enclosure double door with IP 42/43 protection with 63A 4 pole isolator as incommer and 24 nos 6-32A SPMCBs (C Curve 10KA) as outging on wall by iron leg as per GS. (Legrand / Siemens/ similar type)

S/F double door sheet steel (16 SWG),powder coated cable end box for 8 way TPN DB horizontal/ vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment

Supplying & fixing 250 V 2+14 way SPN MCBDB with SS enclosure double-door with 40A DP isolator as incomer and 14 nos 6-10A SPMCBS ('C' curve, 10 kA) as outgoing in/on wall as per GS (Legrand/ Siemens/similar type) incl. connection.

S/ drawing PVC insulated & unsheathed single core standed FR copper wire ( ISI ) in 20 mm dia PVC rigid conduit (Precision/ ISI) complete with all accessories as per GS on wall/ in wooden partition as per direction of EIC as below : (i) 2 X6 sqmm and 1 X 4 sqmm.

(ii) 2 X4 sqmm and 1 X 2.5 sqmm.

(iii) 2x 2.5 sq mm + 1X 1.5 sq mm.

(iv) 3 X 1.5 sq mm cu wire

S/F compression type cable gland as per GS as bellow: (i) 4 core 95 sq mm

(ii) 4 core 35 sq mm

Finishing end by solderless socket by crimping method as per GS for the following cable/ wire:- 4 core 95 sq. mm cable

(ii) 4 core 35 sq. mm cable

(iii) 2 X 6 + 1x4 sq mm cu wire

(iv) 2 X 4 + 1x2.5 sq mm cu wire

(v) 2 X 2.5 + 1x 1.5sq mm cu wire.

Distn. Wiring by 2 X 1.5 sqmm & 1 X 1.5 Sqmm ECC single core stranded "FR" PVC insulated & unsheathed cu. wire in 20 mm bore PVC rigid conduit(Precision make) on/ in wall (wooden) to light/fan/call bell etc. points with modular type switch (North West/ Cabtree/ Legrand/Schneider) fixed on modular board with top cover plate and two no. suitable size "Ph & N" copper bar & earthing attachment ( Av. Run 8 mtrs) as per GS.

do--do-- to 6A plug point incl. S/F Modular flush type 250V 1 No 6A Plug socket & 1 No 6A (North West/ cabtree/legrand /Schneider) switches incl. earthing attachment (on board) as per GS.

do--do-- to separate 6A plug point incl. S/F Modular flush type 250V 1 No 6A Plug socket & 1 No 6A (North West /cabtree /legrand/ Schneider) switches incl. earthing attachment (Av. Run 7.5 mtrs) as per GS.

S/F modular flush type 250V 1 no 16A & 3 nos 6 A plug socket, 1 no 16A & 3 Nos 6 A Piano key type switch (North West /Cabtree/ Legrand/Schneider) incl. S/F MS/PVC box with Modular top cover on/in wall ( For computer board) incl. necy. connection as per direction of EIC.

S/F 250V modular flush type 1 no. 16 A Plug Socket with 1 no. 16A switch (North West/Cabtree/Legrand /Schneider) on/in wall with modular switch board & top cover & necy. connection as per GS.

S/F recessed mounted 28W 2'X 2'LED full glow light (Philips, cat no. RC380B LED28S-6500 L60W60 PSU OD/ Wipro) complete with all accessories fixing by GI wire/ iron chain arrangement from ceiling incl. necy connection as per direction of EIC.

S/F MS fan clamp of two piece type for RC ceiling as per GS

S/F 48'' sweep AC Ceiling fan complete with all accessories incl. connection (Make-Orient-PSPO, NEW BREEZE/CG) as per GS model & approved by EIC.

S/F modular type (step) 2 module electronics fan regulator incl. connection (North West/Cabtree/Legrand)

S/F twin TL5 fluorescent light fittings (Philips, TMC501 2xTL-D36W EBE/ similar type) complete with all accessories suspended below the ceiling by L clamp/down rod arrangement with S/F 2 nos 28 W fluo. Lamp incl. necy. connection as per GS.

S/F twin TL5 fluorescent light fittings (Philips, TMC501 2xTL-D36W EBE/ similar type) complete with all accessories suspended upto 40 cm below the ceiling by L clamp & down rod arrangement with S/F 2 nos 36 W fluo. Lamp incl. necy. connection as per GS.

S/F 400 mm sweep wall bracket fan complete with all accessories (Orient/ CG/Havells) on wall incl. connection as per EIC.

S/F 4 module starter for AC with 16-25A/ 11-18A starter, DP MCB & connection (Make- North West/ similar) as per direction of EIC.

S/F modular flush type 250V 1 No 25 A plug socket (ROMA/Cabtree/ Legrand/North West) with plug top incl. S/F metal box with modular top cover on/in wall & necy. connection as per direction of EIC.

S/F LED type engaged board with red lamp indicator incl. S/F 1 no red lamp on batten holder and connection.

S/F superior type call bell with moduler type bell push & ceiling rose incl. connection as per GS.

S/ F 6"/9" decorative type exhaust fan on wall/ window & making necy. Connection after cutting the window if necessary as per GS (Make- Havells,Cat no.Ventil Air DXW 150mm/ CG,cat no.Briskair 6Blade(250mm)/Orient).

S/F 3W circular type recessed mounted LED spot light fittings with lamp (Philips, AbstraSpot) after cutting the false ceilling & making necy. Connection as per direction of EIC.

S/F 15W warm/ white colour circular type recessed mounted LED light fittings with lamp (Philips, Ultra Slim) after cutting the false ceilling & making necy. Connection as per direction of EIC.

S/F mirror light fitting on wall with lamp incl. necy. connection as per direction of EIC.

S/F 2 Module box with 2 module socket incl. connection as per GS.

S/F 3'' alluminium U channel on floor for wire protection as per direction of EIC

SITC of 250V Timer DB (equivalent of 8 Way SPN DB in size) with steel sheet enclosure double door (IP-43, power coated), neutral bar, Din Rail comprising with 1 no. 20A/25A DP MCB ('C' curve, 10 KA.), 1 no. 24 hours Programmable digital Time Switch with minimum switching time of 15 minutes and 1 no. 18A/25A contractor complete with internal wiring by suitable size of copper wire including 1 No. Auto Manual bypass toggle/changeover switch and Provision for earthing attachment including LED indication light for running condition with locking arrangement. (For 1.5/2.0 TR AC m/c) (Make:-Siemens/ABB/Hagger/similar.)

Supply & installation of Split type Air Conditioner fitted with Rotary Compressor: Cooling capacity nominal (K.Cal/Hr): 5800; Cooling Cap(Min) Guaranteed (K.Cal/Hr): 5500; Min Room Discharge Air Flow (Cu.m/h): 800 (appx.), without installation kit (cupper pipe, water pipe, insulation, cable etc). Star Rating: 02 or above (1.8/ 2.0Ton) (Make: Mitsubishi Heavy/O General).

S/F M/S braket (2 nos leg per set) for installation of outdoor unit of split type AC machine.

Supply & fixing of (i) 2 X 2.5 sqmm + 1X 1.5 sqmm copper electrical cord, (ii) 5/8" & 1/4" copper pipe for suction & discharge, (iii) 5/8" & 1/4" insulation foam, (iv) PVC drain pipes for drainage.

L.W.C. must be quoted manually @1% on the total quoted value else the total quoted rate shall be treated incl. LWC as per rule. N.B. Rate should be quoted inclusive of GST.

MANTHU ELECTRICALS

BANDANA ENGINEERS CO-OPERATIVE SOCIETY LTD