e-TENDER No. CW/KSEBL/03 /2020-21

Amount

Providing 2 Nos Bus Shelters

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, - All work up to plinth level 1:2:4 (1cement:2 coarse sand:4graded stone aggregate,20mm nominal size)

Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete up to plinth level- Thermo mechanically treated bars of grade Fe-500D or grade

Solid blockmasonry using precast solid blocks of factory made) of size 40x20x20 or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness of 20cm and above in cm 1:6 (1cement:6coarse sand) etc complete

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20m in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

12 mm thick cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement: 4 fine sand)

Providing and laying Antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand),including grouting the joints with white cement and matching pigments etc.complete <br> Size of Tiles 300x300 mm as per Engineer In charge

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sand iched between two Aluminium sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc all complete required to perform as per specification and drawing

Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete

Providing and fixing aluminium work with extruded built up standard tubular sections/ appropriate Z sections and other sections, fixing with dash fasteners of required dia and size, including necessary filling up the s at junctions . Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete

Providing and fixing 6 mm dia. G I level adjusting hangers ( upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-Charge.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, vertical post, channels, plates etc.including welding, grinding,buffing,polishing and making curvature and fitting the same with necessary stainless steel nuts and bolts complete , of required size on the top of the floor or the side of waist slab

Name Boards

Sinelab Technologies Pvt. Ltd