RESURFACING OF ROAD OF DEPOT PERIMETER AND SPECIAL REPAIR TO SINGLE OFFR LIVING AREA ROAD AT ARMY AREA BANAR UNDER GE BANAR

Amount

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., complete all as directed and specified.

M&L for repair to pot holes not exceeding 30mm depth not exceeding 1.00 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, etc., cutting around edges to at least 30mm in depth, making good by applying tack coat using paving bitumen VG-10 grade @ 5 kg per 10 Sqm, putting in premix bituminous macadam with binder 9.8kg per 10Sqm bonded with 0.09cum of stone chipping of 6.3mm, filled up to the top level of existing road, well rammed (including supply of bitumen, premix and chippings) and compacted with power roller complete all as specified and directed.

M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 sqm and not exceeding 50mm deep complete all as specifed and as directed.

M&L for Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre on unsurfaced surfaces ie., on pot holes complete all as specifed and as directed.

M&L for laying premixed bituminous macadam using VG-40 grade paving bitumen (using binder not less than 4% by weight of total mix) rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using 8 to 12 ton power roller complete all as directed and specified.

M&L for applying evenly a tack coat with paving bitumen VG-10 grade at the rate of 5.0Kg per 10Sqm complete all as directed and specified.

M&L for bituminous premix semi dense asphaltic concrete, 30mm consolidated thickness with 5.5% binder content by weight of total mix using paving bitumen VG-40 grade mixed in computerized hot mix plant and laid with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as directed and specified.

M&L for preparing bituminous road surfaces and marking 2.5mm thick center lines, stop lines, dashes, arrows, letters etc and the like not exceeding 10cm width, with hot applied Thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

ABHOG INFRASTRUCTURE PRIVATE LIMITED