PROVN 06 X HIGH MAST SECURITY LIGHTS WITH 4 X FLOOD LIGHTS 150 WATT IN 12 CORPS SIG REGT (AREN) IN ARMY AREA JODHPUR

Amount

Supply and fix in replacement of LED flood light fitting, 150 Watts, 230 V, 50 HZ, suitable for operation over voltage range of 160 V to 260 V, duly housed in pressure die cast aluminium housing, compresing of LED with individual optical lens, electronic driver with Surge protection upto 10 KV and PF more than 0.90, confirming to IP65 with copper wire for connection complete all as directed by Engr-in-Charge. MAKE :- Phillips/Wipro/CG.

Supply and fix security light junction boxes of Dimension –[300mmX200mmX105mm], shockproof, rustproof, termite resistant, weather proof, cable entry from bottom , pole mounting arrangement along with 3 phase 4 wire almunium busbar with insulators and MCB SP - 6 amps rating with provision of MCB, Cable Glands incl three core copper cable with pvc conduit from junction box to existing LED fitting complete all as directed by Engr-in-Charge. Make :Sintex Code No GS-JB-3020 (I) (hight hinged) / Hensel/Neptune

Material and labour for prestressed concrete poles as per IS 1678 11 M long minimum cross section area 152mm x152 mm at top and 152mm x 260mm at bottom class-9 all as specified and directed by Engr -in- Charge. Make: sankhala udyog Jodhpur / JK Udyog Jodhpur / Cement Fabric Jodhpur

M&L cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 10 Sq mm 4 Core complete all as directed by Engr-in-Charge.

Material and labour Cement concrete (1:3:6) type C -2 using 40 mm graded stone aggregate for foundation of pole /struts/stay assembly etc complete all as directed by Engineer-in-charge.

Material and labour Cement concrete (1:3:6) type C -1 using 20 mm graded stone aggregate set in cement motor 1:6, for pedestal of poles/copping including necessary frame work ,fair finishing to exposed surfaces using extra cement complete form, all as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as directed by Engr-in-Charge.

Material and labour for river sand cushioning to underground cable screened un-washed river sand and punning for cushioning to cable all as specified and as directed by Engr-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover, class HVP, type-I flat size 250mm x 150mm x 40mm and abutting each other with gap between adjacent precast concrete cable cover not exceeding 10 mm over underground cables for protection complete all as directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as directed by Engr-in-Charge.

Removing of excavated soil not exc. 50 M and depositing where directed at a level n. exc 1.5 M above the starting points all as directed by Engr-in-Charge.

Earthing complete with galvanized steel earth plate electrodes 600mm x 600mm x 6.3mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site. NOTE:- Rate included for excavation & earth work in any type of strata as shown in electrical plate No 3.

M&L for GI tubing medium grade (ISI marked) with all fitting/accessories for protection of cable on pole/wall and under road crossing including clamps, nuts bolts etc all as specified and directed of following sizes:- (a) 40mm dia

(b) 80 mm Dia

Motorized Auguring/drilling in road at 90cm depth of dia suitable for laying of 80/100mm dia GI tubing pipe complete all as directed by Engr-in Charge.

Material and labour for steel structure, cross arms bracing supports ,clamps, back plates of any type, section incl. nuts, bolts, washers, welding ,bending cold or hot in any size and circular shape incl hanging arrangement for LED flood light all as directed Including two coats of aluminium paints over a coat of red oxide primer incl preparation of surface complete all as directed by Engr-in Charge.

S&F sheet metal enclosures for MCB distribution board SPN 4 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as directed by Engr-in Charge.

S&Fof Isolator SPN , 40 Amp , 240 Volt complete all as directed by Engr-in Charge.