Renovation/Upgradation of 6 Nos. room (101 to 104 rooms with toilet at first floor, Neelkanthi Suite and VIP Suite at Ground Floor) at Kingfisher, Tourist Complex, Ambala.

Amount

Dismantling of floors, glazed tiles, door shutter, G.I. & C.I. pipes C.P. fittings, paneling (if required) sanitary fittings etc. including disposed of malba as directed by Engineer-in-charge.

Dismantling of existing false ceiling in room and toilets with frame including removal of malba from site as per satisfaction of engineer in charge.

P/F of G.I. pipe Jindal /tata make B class including cutting and making etc. complete in all respect as per satisfaction of Engineer in charge.

(i) 15mm dia

(ii)20mm dia

(iii) 25mm dia

Providing & Fixing 12"x24" wall tiles with Savanna light with highlighter Savanna light Kajaria make in skirting/dado, pillars, wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles complete in all respect as per satisfaction of Engineer in charge.

Providing and fixing floor tiles double charged 600mmx600mm of Johnson/kajaria/nitco make laid in any pattern as specified over base of 20mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles Complete in all respect as per satisfaction of Engineer in charge.

Providing & fixing at floor tiles Laying and fixing vitrified/ceramic/Glazed tiles of 400 mm x 400 mm any size of approved make in skirting/dado, pillars, wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles.(Tiles shall be supplied by the Department.)

Providing and Fixing POP false ceiling with G.I. suspender using fastener and frame work with G.I members using best quality wire mesh (23 gauge 12 Sq per inch)with 12mm POP plaster (Approved make) cornice beading if any, including two coats of plastic emulsion after preparation of surface priming coats to the full satisfaction of engineer in charge. (i) Main member will be 20 gauges @ 2'-0" centre to centre. (ii) Secondary member will be of 24 gauges @ 3'-0" centre to centre. (iv) Cutting of holes for electrical fittings as per drawing and design. (v) Floor area of false ceiling will be measured no extra area will be paid for offsets and dome area. (In rooms)

Providing and Fixing factory manufactured solid flush door shutters century or green make 35mm thick complete in all respect as per satisfaction of Engineer in charge.

Providing and fixing ATLANTA WALL MOUNTED closet, category no.92514 (55x37x39 CMS) of Italian collection in star white colour with Hindware queo collection equivalent complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing table top wash basin Fonte CAT.NO. 91069 size 55x46x15cm in Star White Colour or equivalent Orca Collection on shelf including cutting slab as per satisfaction of Engineer-in-charge.

Providing and fixing top wash basin in OPAL size with pedestal 67x51x82cm, or equivalent Cat. No. 10082, pedestal 11032, N.S as per satisfaction of E.I.C. (N.S) Room No. 101.

Providing and fixing fancy looking mirrors with SS spacers etc complete in all respect as per satisfaction of Engineer in charge. (Modiguard or equivalent)

Providing and fixing CP brass 15mm dia heavy duty extension pieces complete in all respect as per satisfaction of Engineer in charge.

Providing and laying 15 to18 mm thick granite stone in all shades in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite including labour for foxing cramps pins and dowels complete in all respect as per satisfaction of Engineer in charge (Basic Rs. 120/- per sqft+GST). (Black Granite)

Providing and fixing C.P. brass fittings Jaquar make continental series complete in all respect as per satisfaction of Engineer in charge.

Central Hole Basin mixer without pop up work system with 450 mm long Braided Hoses (Con-167B)

Shower Arm with flange (SHA- 483).

Overhead shower square 150x150mm (35497).

Telephonic shower with 1-5 mtr long flexible tube (SHA-571).

Wall bracket for Hand shower (SHA-555).

Wall mixer 3 in I (Con-281 KN).

Two way bib cock (Con-0.41KN).

Towel Ring (Con-1121 N).

Towel rack 600 mm with lower hanger (1181 N).

Soap dish (1131 N) holder

Toilet paper holder with flap cover at 1'-6" height cat. No. (1153 N).

Pillar cock CP brass (Con 021 KN)

Corner glass shelf with bracket (ACN-1173)

Angular stop cock with wall flange(Con-059 KN)

P/F BRASS T.B. 8" (S.S. finish) of door set make complete in all respect as per satisfaction of Engineer in charge.

P/F back doors stopper in (SS finish) 3" size complete in all respect as per satisfaction of Engineer-in-charge.

P/F Door set make, Nika Model-handle 10" CY of SS, P/F Door set cylinder of SS both side key 60mm Art No. CL200, P/F Lock body EC, SS make of Door Set Art No. ML 110 complete in all respect as per satisfaction of engineer in charge.

P/F door set make, Nika model-handle on rose of SS, P/F mortice latch of SS, Door set make Art No. ML 103 Complete in all respect as per satisfaction of engineer in charge.

P/F locks/latches SS ML-100 with both side key 80mm CL-203 cylinder make of door set/dorma make complete in all respect.

P/F SS bearing Hinges Dorset make of SB Art No. HG 1151A (304 grade) (102 x 76 x 2.5 x 12) complete in all respect as per satisfaction of engineer in charge.

P/F Door stopper Dorset make DSHT door mounted hanging type complete in all respect as per satisfaction of engineer in charge.

Melamine polish including preparation of surface and polishing complete in all respect as per satisfaction of engineer in charge.

Providing and fixing 8mm thick toughened glass with rubber beading as per drawing and design complete in all respect as per satisfaction of engineer in charge.

Electrical Items (Non Scheduled)

S/E of ceiling fan and exhaust fan (ventilator) of Orient/ Bajaj/ Crompton/Havells to be fixed with fan point with the required labour and material complete as per satisfaction of engineer in charge.

(i) Ceiling fan 56" Sweep

(ii) ventilator fan DX 250mm

Supply & Erection of LED Batten of 20 watt of Surya make complete to be fixed with light point on wall/ceiling along with required labour and material complete in all respect including testing as per satisfaction of engineer in charge.

Supply and Erection of fancy wall light single/double ceiling light, mirror light complete (subject to approval of architect in charge) in all respect alongwith LED Lamp 6 watt of Philips make to be fixed with light point with the required labour and material as per satisfaction of engineer in charge.

(i) fancy wall light single

(ii) fancy wall light double

(iii) LED ceiling light/Down lighter

Supply and Erection of MCCB enclosure of capacity 100 A to 250A to be fixed on existing angle iron board with the required labour and material as per satisfaction of engineer in charge.

Supply Erection and Installation of LED 43” Samsung/ L.G/Sony/ make High Definition pen drive supported complete in all respect as per satisfaction of engineer in charge.

Supply, Erection & Installation of 25 ltr. Capacity Jaquar make complete with required labour and material complete etc.

Supply and Erection of down light concealed of Philips make 6W LED to be fixed in false ceiling complete in all respect as per satisfaction of engineer in charge.

Supply and Erection of fancy mirror light as approved by Architect complete in all respect as per satisfaction of engineer in charge.

Supply and Erection of key tag switch modular type north east fixing in modular box including fixing and making necessary connection complete in all respect as per satisfaction of of Engineer in Charge.

Supply installation &testing of split inverter type air conditioner 1.5 ton 5star rating with indoor & outdoor unit complete in PVC pipe, copper pipe, stand and staplizer etc. complete kit all respect as per satisfaction of engineer in charge ( including installation of kit 3 m lenth of copper piping and copper wire 2.5 sq mm) ( model: RSOG518HCEA) ( Make: Hitachi/ daikin/ Carrier)

Bidder Name

Amount

M/s Sharwan Kumar Gupta

Chirag Dange, Contractor

Abhinav Parasar

Chirag Dange, Contractor

Abhinav Parasar

Chirag Dange, Contractor

Abhinav Parasar