Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-Finance | L1 | Accepted-Finance Lawerr Rate Quoted | |
| 2 | L2₹13.7 L+₹12,868.73 (0.95%)Accepted-Finance | L2 | Accepted-Finance Higher Rate Quoted | |
| 3 | L3₹14.0 L+₹33,791.13 (2.48%)Rejected-Finance | L3 | Rejected-Finance Higher Rate Quoted | |
| 4 | L4₹14.8 L+₹1.2 L (8.75%)Rejected-Finance | L4 | Rejected-Finance Higher Rate Quoted | |
| 5 | L5₹15.3 L+₹1.7 L (12.3%)Rejected-Finance | L5 | Rejected-Finance Higher Rate Quoted |
| Sl No | Description | Qty | Unit | MALABAR LABOUR CONTRACT L5 | Santhosh Kumar K.V. L1 | SAJI P L2 | JASIR CA L3 | ROSHAN HARRISH L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00Sheet roofing | ||||||||
| 1.00 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | 0.64 | cum | 2,037.99 ₹1,304.31 | 1,660 ₹1,062.4 | 1,500 ₹960 Lowest | 1,611.99 ₹1,031.67 | 1,711.76 ₹1,095.53 |
| 1.00 | 4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.41 | cum | 11,249.57 ₹4,556.08 | 9,600 ₹3,888 | 10,000 ₹4,050 | 8,898.09 ₹3,603.73 Lowest | 9,448.77 ₹3,826.75 |
| 1.00 | 4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts | 3 | sqm | 965.05 ₹2,895.15 | 800 ₹2,400 | 800 ₹2,400 | 763.33 ₹2,289.99 Lowest | 810.51 ₹2,431.53 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 3,147.91 | kg | 231 ₹7,27,167.21 | 162 ₹5,09,961.42 Lowest | 165 ₹5,19,405.15 | 174.79 ₹5,50,223.19 | 185.5 ₹5,83,937.31 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,518 | kg | 190 ₹2,88,420 | 140 ₹2,12,520 Lowest | 165 ₹2,50,470 | 141.05 ₹2,14,113.9 | 149.62 ₹2,27,123.16 |
| 1.01 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 713.4 | kilogram | 111.64 ₹79,643.98 | 100 ₹71,340 | 100 ₹71,340 | 88.32 ₹63,007.49 Lowest | 93.62 ₹66,788.51 |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 250.6 | sqm | 842 ₹2,11,009.41 | 696 ₹1,74,421.08 | 700 ₹1,75,423.5 | 637.38 ₹1,59,730.61 Lowest | 676.37 ₹1,69,501.7 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 18.1 | metre | 540.68 ₹9,786.31 | 470 ₹8,507 | 300 ₹5,430 Lowest | 427.66 ₹7,740.65 | 454.12 ₹8,219.57 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 247.95 | sqm | 157.75 ₹39,113.8 | 128 ₹31,737.34 | 90 ₹22,315.32 Lowest | 124.78 ₹30,938.95 | 132.12 ₹32,758.89 |
Tender Value
₹16.9 L
EMD Value
₹42,356
Closing Date
16 Jul 2026, 3:00 pmClosed
Executive Engineer
Building Division Mananchira Kozhikode
GENERAL Providing sheet roof for Mini civil station Perambra-Providing sheet roof for Mini civil station -Perambra in Perambra GP General Civil Work
2026_PWD_859823_1
09/EEBK/2026-27
Open Tender
Civil Works - Buildings
Item Rate
180 days
Perambra
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,760
Yes
₹42,356
Yes
21 Jul 2026
9 Jul 2026
18 Jul 2026
9 Jul 2026
16 Jul 2026
9 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Sheet roofing | |||||
| 1.001 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar | - | cum | - | - |
| 1.002 | 4.2.3:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts | - | sqm | - | - |
| 1.004 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.005 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.006 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1 | kilogram | - | - |
| 1.007 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.008 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
| 1.009 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 0.2 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
finance_1453930.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1453930.xls
BOQ • 0.30 MB
sbd.pdf
Tender Documents • 1.64 MB
AS.pdf
Additional Documents • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .