Kerala

Active

Works

Civil Works - Roads

Road Safety Work in various roads under Vennikulam Section

Public Works Department

Mallappally | Pathanamthitta, Kerala

Amount: ₹8.5 LCloses: 14 Oct 20263d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes14 Oct 2026
Bid Opening16 Oct 2026

Tender Value

₹8.5 L

EMD Value

₹21,181

Closing Date

14 Oct 2026, 3:15 pm3d left

Tender Inviting Organisation

Name

Assistant Executive Engineer

Address

PWD Road Sub division, Mallappally

Work Description

Road Safety

Tender Information

Tender ID

2026_PWD_877228_1

Reference Number

PWD/RB/8072/2026-2027

Tender Type

Open Tender

Product Category

Civil Works - Roads

Form of Contract

Item Rate

Period of Work

60 days

Location

Mallappally

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredSBD (.pdf)

RequiredNIT (.pdf)

RequiredPreliminary agreement (.pdf)

RequiredAffidavit (.pdf)

RequiredForm of tender (.pdf)

Requiredepayment (.pdf)

RequiredIntegrity (.pdf)

RequiredPAN Card (.pdf)

RequiredGST documents (.pdf)

RequiredRegistration certificate (.pdf)

RequiredFee remittance (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,870

EMD Fee Amount

₹21,181

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

16 Oct 2026

Download Starts

7 Oct 2026

Download Ends

14 Oct 2026

Submission Starts

7 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (4 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Road safety
1.001	8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.	858.9	sqm	-	-
1.002	8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :-	1,416	no	-	-
1.003	OD18204/2026-2027: Supplying and erecting LED solar blinker lights with micro controller based Blinker controller,pole and panel frame,pole cap,MS clamps for mounting of signal heads , 300 mm polycarbonate housing with door assembly,supply cable ,30 mm LED signal aspects,battery bank,solar photo voltaic modules and charges control unit including erection testing and commissioning etc complete.	2	each	-	-
1.004	55.38a:Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on Structural Steel c section vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of structural steel c section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.3.	16	metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.04 MB

Work Item Documents

BOQ_1490557.xls

BOQ • 0.30 MB

sbd.pdf

Tender Documents • 1.63 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Road safety
1.001	8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.	858.9	sqm	-	-
1.002	8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :-	1,416	no	-	-
1.003	OD18204/2026-2027: Supplying and erecting LED solar blinker lights with micro controller based Blinker controller,pole and panel frame,pole cap,MS clamps for mounting of signal heads , 300 mm polycarbonate housing with door assembly,supply cable ,30 mm LED signal aspects,battery bank,solar photo voltaic modules and charges control unit including erection testing and commissioning etc complete.	2	each	-	-
1.004	55.38a:Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on Structural Steel c section vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of structural steel c section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.3.	16	metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Road safety

1.001

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

858.9

sqm

1.002

8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :-

1,416

1.003

OD18204/2026-2027: Supplying and erecting LED solar blinker lights with micro controller based Blinker controller,pole and panel frame,pole cap,MS clamps for mounting of signal heads , 300 mm polycarbonate housing with door assembly,supply cable ,30 mm LED signal aspects,battery bank,solar photo voltaic modules and charges control unit including erection testing and commissioning etc complete.

each

1.004

55.38a:Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on Structural Steel c section vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of structural steel c section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.3.

metre