SPECIAL REPAIR TO BLDG NO 119 (09 QTRS) OR MD ACCN AT SARAN LINE OF EME BN UNDER AGE B/R-IV OF GE(SOUTH) MEERUT CANTT

Amount

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Material & labour for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry surfaces, finished even and smooth without using extra cement complete all as specified & directed.

Demolition of plain cement concrete in ground floors & pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

Material and labour for PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregates) mass concrete and sub base of floor complete all as specified and directed.

Material and labour for coloured Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) area of each tile exc 0.6 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and and directed

Material and labour for coloured Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and and directed

All as per item No 8.00 above but as in skirting/dado complete all as specified and directed.

Material and labour for coloured Glazed ceramic tiles in vertical surfaces350x250x7mm/ 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or cloured cement to match over and including 10mm thick rendering in CM (1:4) on fair face of brick or concrete surface complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floor, etc complete all as specified and directed.

Material and labour for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platforms and the like, bedded over and including 10 mm thick screed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of stone, including rounding of exposed edges and drilling hole for gas pipe complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 12-15mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granite finish complete over and including 15mm thick cement screed bed in CM 1:4 complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1, 75mm thick (using 20mm graded stone aggregate) as in plinth protection including finished sufraces even and smooth without using extra cement complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc 1.5 sqm each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed.

Taking down shutter of any description area exc. 1 Sqm but n.exc.2 Sqm each complete all as specified and directed.

Refixing or easing & adjusting shutter, without taking down of any description exc 2 Sqm each complete all as specified and directed.

Supply & fix steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm all round including iron mongry etc complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit . (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) Gaurd bars glazing & wire mes shall be measured and paid for separately complete all as specified and directed.

Supply & fix steel window or ventilators fixed type with glazing bars complete all as specified and directed.

Supply & fix 35mm thick 2nd class hard wood (hollock) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc, without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I section 8.24 (a) complete all as specified and directed.

Supply and fix 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Supply and fix MS 300mm size helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed.

Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

Supply and fix in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix 3 mm thick plain sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix 3 mm thick sheet glass frosted type ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & fixing mild steel framed work such as grills or framed guard bars with end of bars shouldered or reveted or forged into spike, and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed.

Material & labour for PCC 1:3:6 type C-1 using 20mm graded stone aggregates as in hold fast blocks, copings, benching, roof kerbs etc, incl cutting into bricks or stone wall as required for inserting hold fasts complete all as specified & as directed by Engr-in-Charge.

Supply and fix butt hinges 100mm size, medium weight, cold rolled incl necessary screws complete all as specified and directed.

Supply & fix 125mm size aluminium alloy handles, cast type, anodised complete all as specified and directed.

Supply and fix 150mm long aluminium anodised barrel tower bolts, 12mm dia of bolt all as specified and directed.

Supply and fix 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube in opening as per specification & drawing shown on page 178 of SSR-2020(Part-II) complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gether with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II) complete all as specified & directed.

Supply and fix 100mm long stainless steel butt hinges complete all as specified and as directed.

Material and labour in repair factory made solid PVC plyboard 18mm thick as in cup baord shelf, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free, complete all as specified and directed.

Material and Labour for 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws cup board/kitchen cabinet including taking down old worn out boarding of any description complete all as specified and directed.

Supply and Fix 40mm dia cupboard knobs of brass, polished, fixed with nut, screw and washer complete all as specified and directed.

Supply and fix chromium plated hydraulically operated hinges, bright finished ISI marked fixed with stainless steel screws complete all as specified and dircted.

Supply and fix CP steel handle 100mm long fancy type for PVC cupboard and fixed with standared steel screw complete all as specified and directed

Supply and fix in repairs alluminium door seal with PVC brush fixed with steel screw at bottom rail door shutter complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling of old water tanks complete all as specified and directed.

Supply and fix in repair 20 mm bore, PVC ball valves, high pressure PTMT epoxy coated aluminium rod, screwed for iron pipe or for brass ferrule complete all as specified and directed. ( Min Wt:- 210 Gms).

Supply & fix in repair 15 mm bore gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Supply & fix in repair 20 mm bore gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

Taking up or down steel tubing and connection 15 mm bore pipe complete all as specified & directed.

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified & directed.

Cutting chases, pinning in making good to facing where required and pointing in CM 1:3 to ends for concealed water tubing and making good cutting n exc 10 cm girth in brick wall complete all as specified and directed.

Supply and fix 15mm bore GI tubing medium grade with all fittings and fixed to walls/ceilings or laid on floor complete all as specified and directed

All as per item No 51.00 above but 20mm bore

Supply and fix bib taps, cast copper alloy chromium plated , body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

Supply and fix in repair angular valve , 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions all as specified and directed.

Supply and fix in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe fixed complete all as specified and directed.

Supply and fix in repair stop valves 15mm bore fancy type, CP with long shank & cup (concealed type) cast copper aloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for uniouns complete all as specified and directed.

Supply & fix in repair brass chromium plated shower rose125mm size with or without swivel joints, long body , including fixing to steel pipe or union complete all as specified & directed.

Supply and fix in repair vitreous china wash hand basin, white, flat back of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and CP brass waste coupling complete all as specified and directed.

Supply & fix in repair vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest,Cast iron ‘P’ or ‘S’ trap, lime concrete bedding including making good to floor to match the existing surface complete all as specified and directed.

Supply and fix PVC low level duel flushing cistern 9-10 Ltr capacity white with inlet, ball valve, float , handle ,brackets and 32 mm dia PVC flush pipe for low level cistern complete all as specified and directed.

Supply & fixing PVC connections of 450mm long suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified & directed.

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply and fix in repair cast iron 'P' or 'S' trap, ISI marked, suitable for 100mm bore CI spun pipes complete all as specified and directed.

Supply and fix100 mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

Supply and fix in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

Supply and fix 100/125mm dia CP grating complete all as specified and directed.

Demolition & breaking up drain pipe (PVC/AC/salt glaze ware) for 100mm/75mm complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls as in rain water pipes including stack clamp FI 30x4mm, and screws, plugs complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls as in rain water pipes including stack clamp FI 30x4mm, and screws, plugs complete all as specified and directed.

Supply and fix in repair PVC bends any radius 75mm dia complete all as specified and directed.

Supply and fix in repair PVC bends any radius 110mm dia complete all as specified and directed.

Supply and fix in repairs stainless steel kitchen plate rack, 0.80mm thick, made out of size 900mmx750mmx250mm fixed with plugs screws, washers and waster, including necessary chipping/drilling holes to fix on wall suitable size in wall as per IS specification complete all as specified and directed.

Supply and fix in repair, sinks made of stainless steel not less than 1.00mm thick sheet for kitchen with plugs , washers & waste, including bedding in CM on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495x420mm bowl size 410x330x160mm complete all as specified and directed.

Supply and fix in repairs corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated brass bracket guard and railing complete all as specified and directed.

Supply and fix in repairs glass shelf 43x13cm of 5.5mm thick shelf with chromium plated brass bracket and frame complete all as specified and directed.

Supply & fix tubular towel rail of 20mm dia of brass, chromium plate, ’D’ type, 600 mm long between flanges complete all as specified & directed.

Supply and fix in repair 25mm bore drapery curtain rods poweder coated finished as directed with fancy type incl fixing brackets, stops, rollers etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre insulation etc ) slabs/blankets any thickness incl cover fillets complete all as specified and directed.

Supply and fix false ceiling with 6mm thick e-board white prelaminated both side, set embossed reinfraced ceiling board of oceanic texture fixed over and including GI grid frame work of size not more than 600x600mm having 25mm wide t-section runner made of .33mm GI sheet and angle made 0.45mm thick GI sheet suspended with and including 2 mm dia GI wire leveling clips complete all as specified and directed. (Note- All exposed surface of grid shall be powdered coated white).

Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles incl removing rubbish off the premises complete all as specified and as directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 82.00 above but except bricks including cleaning of old bricks complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

Dismantling of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and Labour for precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slab (for manholes, drain etc), chullah hoods, chajjas, shelves and similar articles complete all as specified and directed.

Material & labour for TMT Bars 10mm dia and over cut to length bent to shape required inculding cranking bending spirally hooping for columns hooking ends etc and binding with and including mild steel wire annealed less than 0.9mm dia or securing with clips complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and S&F 6mm thick fiber cement, corrugated or semi-corrugated sheets in roofs, walls etc with L or J type or cranked hook bolts complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering/claddingto wall, fixed with hot dip glavanised shelf drilling and shelf tapping screws neoprene and EPDM wahsers complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

Supply and fix mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to Fe-410 Gde-310 complete all as specified and directed.

Materials and labour for complete removal of existing treatment and finishing the surfaces of wall with wall putty and applying two coats of cement base paint of any colour, complete all as specified and directed by Engr-in-Charge.

Materials and labour for complete removal of existing treatment from wall and preparing the surfaces of wall by applying a coat of wall care putty and applying two coat of oil bound distemper of approved colour complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall etc and applying two coat of oil bound distemper (OBD ) over one coat of primer over and including 1mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of newly plaster surface of wall and applying two coats of cement base paint over and including one coat of primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour preparation of new or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer all as specified and directed.

Materials and labour for preparation of old painted wooden surface of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

Materials and labour for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including taking down carefully old battens/conduit point wiring complete all as specified and directed for One Bulb /Tube light/Bell /security light point controlled by one, one way switch 05 / 06 Amps

All as per serial item No 100.00 above but One ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 100.00 above but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 100.00 above but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 100.00 above but One call bell point controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 100.00 above but 2.5 nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Supply and fix switch piano flush type, 05/06 Amp single pole, one way 240 volts complete all as specified and directed .

Supply and fix socket outlet 5 pin, 05/06 Amp flush type 240 volts complete all as specified and directed.

Supply and fix switch piano flush type, 15/16 Amp single pole, one way 240 volts complete all as specified and directed.

Supply and fix socket outlet 3 pin, 05/06 Amp and 3 pin 15/16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed .

Supply and fixing call bell push button switch piano/flush type, 05/06 Amps single pole, one way 240 Volts complete all as specified and directed.

Supply & fixing call bell ding dong type, AC 230 Vols sinlge pole complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, with and including connector complete all as specified and directed .

Supply and fixing LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 Watt, complete with all acessoires all as specified and directed. Make :- Havells HEXAFT10WLED857SSYMBOPC/Crompton/Wipro/ Bajaj

Supply and fix decorative LED tube light fitting 1x20 Watt, with opal diffuser, environment friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No having single side connection complete with all accessories and fixing material complete all as specified and directed. Make : Havells Model No PHOTONULTRAE2.01213T8SSTL20WLED865SPC+STREAKT8UPT01x22WSSBSWH or Equivalent in Crompton/Wipro/C&S

Supply and fixing LED tube light fitting 1x9/10 watt surface mounted, with extruded polycarbonate, integrated lamp & dirver with opal diffuser and decorative end plates complete with all acessories all as specified and directed. Make- Havells Capt Part No LUMELINEBS9WLED865SPCWH or equivalen in Crompton/Bajaj

Supply & fixing of ceiling rose 3 terminal PVC / poly carbonate, isolated body complete all as specified & directed.

Supply and fix lamp holder (Angular/Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fix LED lamp BEE rated 9 watt suitable for B22 holder complete all as specified and directed.

Material and labour for sub main wiring with 2x6.00 Sqmm nominal cross sectional area (two single core cable of 6.00 Sqmm for phase and neutral + o1 single core cable of 6 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, FRLS unsheathed, copper conductor cable with and including continuous earth wire of size 6.00 Sqmm nominal cross sectional area, single core, PVC insulated, FRLS copper conductor cable drawing into rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/fittings, brass screws, washers etc and connected to common earth dolly including taking down unserviceable sub main / service main wiring including all cutting/chases etc in wall, making good to walls etc including two coats of white/colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified and directed. (Note : One meter of conduit of 25 mm dia along with 2x6.00 sqmm wire and one 6.00 sqmm earth wire shall be measured as one RM length.)

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white/colour washing/distempering etc to match the existing surfaces complete all as directed .

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge.

Supply and fixing vertical loadline sheet metal enclosure double door, triple pole and neutral (TP&N vertical loading) AC, 415 volts, 04 way , with 200 Amps rated copper bus bar and IP-43 & IK 09 protection, with inbuilt of 01 No MCCB 125 Amps, 16 KA 415 Volts and 12 Nos of MCB's 63 Amps 230 Volt 10 KA inside the DB with metal door and flush to wall including grouting and cutting in existing wall and making good distrubed surface with two coats of white/colour washing/distempering etc to match the existing one complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts of 06 to 40 Amp C curve, 10 kA, confirms to IS/IEC 608981:2002 and making connections complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts of 63 Amp 'B' curve, 10 kA, confirms to IS/IEC 608981:2002 and making connections complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. (Note- After completion of work if desired result of earthing is not obtained the earthing shall be redone without any extra cost to Govt.)

Taking down /out carefully under ground cable of any size and making good to disturbedcomplete all as specified and directed

Supplying, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25Sqmm 3.50 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Supply ,laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m deep for foundation and for manholes, pier holes etc n exc 10 Sqm on plan & foundation etc and getting out in soft loose soil and levelling of bottom surface to required level complete all as specified and directed.

Material and labour for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hard punning complete all as specified and directed.

Material and labour for contineous brick protection to cable with width equal to the length of the whole sub class 'B' bricks laid on edge complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm thick in soft / loose soil complete all as specified and directed.

Removing excavated materials to a distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Supply and fixing LED security light fitting 1x45 Watt luminaries with die cast aluminium housing epoxy powder coated comprising high power LEDs enclosed with lens embeded PC cover with driver fixed in repair including security light bracket made of 32 mm dia GI pipe medium grade 1.5m long including flat iron clamps and suitable nut and bolt qrouted in wall and taking down old GI brakcet complete all as specified and directed. Make :- Havells Model No ENDURA Pearl Neo or equivalent inCrompton/Phillips/Surya

SHAKTI CONSTRUCTION CO

AR Enterprises

Jay Ambay Enterprises