Proper fencing of 300 KVA, 11KV/440V, transformer, installed at B-Type Colony along with erection of 1 no. of tripod type lightening conductor nearby of 300KVA transformer at B-Type Colony of Ara colliery under Kuju Area.

Amount

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m, 10 Mtrs. X 16 Mtrs. 160 Sq.Mtrs.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,, fixing in position and applying a priming coat of approved steel primer all complete.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Fencing 26 * 0.5M * 0.3M + Shed 4 * 0.5M * 1M = 5.9

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) Fencing 26 * 0.5M * 0.3M + Shed 4 * 0.5M * 1M = 5.9

Fixing of metal fence for fencing

Painting of plate, angle, fencing structure, H & T board and transformer Shed with 2 coat of Anticorrosive bituminous paint (black) and 2 coat of enamel paint

Erection of pole of following length in cement concretel:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation 7 including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre. For Lightening Arrestor

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required. For Lightening conductor

Supply & Fixing of Copper Unarmoured cable single core1100 voltage grade 16 sq 9 mm. for earh connection 16 Nos. 12 Mtrs. For Lightening Arrestor

Supply & Fixing of Copper tubular lug 16sqmm for each connection for lightning arrester

18.4 kv rated support insulator 65mm dia and and 50mm long for lightning arrester

Supply & Fixing of heavy duty Solid copper material make lightening arrestor, 1.2 Meter long. 26mm dia with 38mm x 25mm solid copper ball on top embedded with 8mm x 100mm copper spike.

Supply and installation of 2Mx1Mx12mm size, insulaitng rubber mat suitable for working in 11KV rated electrical equiment. To be installed on transformer base

Providing and fixing 0.63 mm thick with zine coating not less than 275 gm/m³ corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks. bolts and nuts 8 mm diameter with bitumen and G.1. limpet washers or with G.1. limpet washers filled with white lead. including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins. rafters and trusses and including cutting to size and shape. For shed top cover-2.5M x 2.4M + for all side cover from top - 2.5M x 0.8M x 4 = 14 Sq.M.

Total impact of GST for the purpose of CTC

M.k. Traders

M/S. PAWAN KUMAR