Renovation of Wash Rooms

CIVIL WORKS

Demolishing Work: Dismantling, Demolishing, Cutting, Removing and Cleaning existing items at site, like wall tiles , floor tiles , Brick bat coba, Brick work, vanity counter, False ceiling, Existing plumbing pipes , sanitary fixtures, wc, wash basin, electrical fixtures , conduits, wiring etc. to make it ready for installation of new tiles, pipings etc. ( 7 wash room blocks and two wash rooms+ two toilet, one wash room block including three toilet and two wash area) including carting away debris from site. In short dismantling complete toilet and carting away the debris as per the site condition and as instructed by site incharge

Water proofing work: All surfaces to be waterproofed should be made sound, clean and dry. Concrete surfaces should have a light steel-trowel followed by a fine hair-broom or equivalent finish, which is dry and free of dust, oil and other contaminants. Sharp projection, moss and lichen must be removed physically.. Ponding test is to be conducted before the waterproofing is done and checked for weak points

Brick Wall: Providing and constructing 115mm thick Brick Masonry in approved Aerocon Bricks (600 x 200 x 100)mm (L x H x W), on approved make aerocon brick adhesive, including necessary pre-cast lintle for door opening, scaffolding work, raking out joints, watering, cleaning, curing etc. all complete at all heights / depth, curing etc. complete as per detail drawing, as specified and as directed by Site in charge.

Plastering : Providing and applying 12mm thick single coat approved make ready mix ciment plaster on internal walls, including necessary scaffolding work, raking out joints, watering, cleaning, curing etc. all complete at all heights / depth, curing etc. complete as per detail drawing, as specified and as directed by Site in charge.

Ledge Wall: Providing and constructing 115mm thick Brick Masonry in approved Aerocon Bricks (600 x 200 x 100)mm (L x H x W), on approved make aerocon brick adhesive, including necessary scaffolding work, raking out joints, watering, cleaning, curing etc. all complete at all heights / depth, curing etc.complete as per detail drawing, as specified and as directed by Site in charge.

Granite Sill: Supplying and laying of 20mm thick approved colour granite sill with double strip, flat mirror polished on cement mortar over lege wall. Rate should inclusive of taransporting unloading, wastage, cleaning and curing etc. all complete as per directed by site in charge.

DOORS: Supplying and fixing of moulded PVC Bathroom doors with all necessary hardware’s and accessories like hinges, tower bolts etc. as directed by site incharge.

UPVC Ventilation: Providing and fixing of Un-plasticized PVC (Polyvinyl Chloride) (60 cm x 60cm size frame) ventilators Louvers type with 6mm forested glass inserted and provision for fixing of 6’’ square type exhaust fan. All glazing shall be internally beaded. The windows shall be constructed in sucha manner that the glazing or deglazing can take place without the removal of the sash or frame. All corner joints shall be homogeneously fusion heat welded in accordance with the instructions of the profile Systems supplier. The resulting joints shall be finished by the grooving/knifing method. Solvent welded joints shall not be allowed. As per the instruction fromo the site incharge.

WASH ROOM MIRROR: Providing and Fixing in position 6mm thick all side polished Mirror (1000 X 900mm) Panelling on wall using glass spacers (4nos) etc. complete as per detail drawing, as specified and as directed by Designer.

FLOOR TILING WORK: Providing and laying in position 600mm X 600mm floor Tile of approved make, colour and shade for Flooring in approved pattern, size & shape to true line and level on average 40 mm thick bedding of 1:4 mix cement sand mortar floated with neat cement, filling the joint with grouting of matching colour including cleaning, watering, curing, filling, etc. complete as per detail drawing, as specified and as directed by Designer.

WALL TILING WORK: Providing and Fixing in position 600mm X 300mm Ceramic wall Tiles of approved make, colour and shade for Flooring in approved pattern, size & shape to true line and level on average 20 mm thick cement mortar floated with neat cement, filling the joint with white / colour cement including cleaning, watering, curing, filling, etc. complete as per detail drawing, as specified and as directed by Designer. Cost to include grouting of matching colour.

PCC WORK :Providing and Laying PCC 1:4:8( One part cement, 4 parts of M sand and 8 part of aggregate)confirming to IS specification including leveling and compacting etc. complete as per specification and as directed by EIC with 40mm granite,/machine/hand broken aggregate for flooring.

SUNKEN AREA FILLING: filling of Sunken area with brick bats red earth (materials can be used from demolished items which is available at site. Rate quoted for only labor charge

UPVC Sliding door: Supply and installation of UPVC Sliding Door with all necessary hardware’s and accessories like hinges, tower bolts, door handle etc. as directed by site incharge. (1m x 2.10 m Size). The sliding should be fixed top of the door.

False Ceiling: Providing and fixing 6mm cement fiber board false ceiling using GI sections as per standaerd specfications

PLUMBING WORKS

Providing and Installation with Material, laying, fixing, checking & finishing total Internal piping and plumbing works in cpvc pipes of approved make for complete Toilet works. (By Using 20mm, 32mm SDR 11 CPVC pipe and 110 mm, 63mm,50mm 10Kg PVC pipe as per the requirement for connecting existing inlet and out let) Cost to include chasing chizling fixing plastering watering curing etc. complete, ( 7 wash room blocks and two wash rooms+ two toilet, one wash room block including three toilet and two wash area)

Providing and fixing of wall mounting WC of approved make, including, flush tank, seat cover and all necessary mounting hardware, white cement, consumables. The cost shall also include health faucet & Angle cock of same make with flexible pipe, 1 No long body tap including all necessary mounting hardware & bracket, consumables, etc. complete as per detail drawing and as specified and as directed.

Providing and fixing Wall mounting Urinal bowl of approved make, Size, including all necessary mounting hardware, white cement, consumables. The cost shall also include health faucet & Angle cock of same make with flexible pipe including all necessary mounting hardware & bracket, consumables, etc. complete as per detail drawing and as specified and as directed.

Providing and fixing of wash Basin (Counter top)of approved make. size of 400-500mm width including all necessary mounting hardware, brackets, necessary hardware, white cement, consumables. The cost shall also include basin mixer with anti bacterial coating, Pillar tap, bottle trap, waste coupling & angle cock of approved make with flexible pipe including all necessary mounting hardware & bracket, necessary hardware, consumables, etc. complete as per detail drawing and as specified and as directed. The cost shall also including 60cmx60cm fabrication and installation of granite counter top with 18mm marine 710 grade marine play wood over the MS frame work.

Providing and fixing of Floor trap, including all necessary mounting hardware, necessary hardware, white / colour cement, consumables, etc. complete as per detail drawing and as specified and as directed.

ELECTRICAL WORKS:Installation, testing & Commissioning of standard light fittings, Exhaust fans and lighting accessories including lamp. The scope shall include, providing of all hardware such as nuts, anchor fasteners, bolts, screws, cleats, clamps, PVC insulated FRLS wires / cables from Junction box to lighting fixtures, with J.B., suspension conduit pipe for drop for fluorescent fitting The cost for supports (wire ropes etc.) and sutiable modular switch back box shall be included in the cost. Full Toilet wiring (conduiting and rewiring, providing Modular switch/socket should be considered in the costing.

LED Ceiling/surface mounted panel Lights (11 W)

LED Wall Mounted Light fittings (Mirror light) 11 W

Wall mounted Exhaust fan with flap 6''

GRAB BAR

U- Shaped Hand Rail foldable . The grab bar is made of 304 stainless steel inside and nylon outside. The handrail is designed with a flip-up assistant leg and the toilet grab bar supports up to 200 Kg frame size Size 60x20x10 (LxWxH) and foldable floor support bar of minimum height of 62 cm. Location of fixing WC Area

Straight Nylon Grab Bar : The grab bar is made of 304 stainless steel inside and nylon outside. The size of the grab bar is 60 cm. Location of fixing Wash counter.

Straight Nylon Grab Bar: The grab bar is made of 304 stainless steel inside and nylon outside. The size of the grab bar is 8 mtr.

Aswam Group

E SQUARE INTERIORS AND DEVELOPERS

MANIKATH CONSTRUCTIONS

R SAJI KUMAR