Renovation of Washrooms in D and E

Amount

PART-A CIVIL WORKS

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm sqm

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling of old S.W. pipes/PVC pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 100 mm diameter

Dismantling of old S.W. pipes/PVC pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 150 mm diameter

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling E.W.C/I.W.C/ Pans, Wash basins of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in ll shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level/or above plinth level and Thermomechanically treated bars of grade Fe500D or more

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade Area of slab over 0.50 sqm

Providing and Laying Ceramic glazed Floor Tiles (Kajaria make Cyprus Tiles or equivalent) of size 300X300 mm (Thickness to be Specified by the manufacturer) of 1st quality conforming to IS:15622 of approved making colours such as white, ivory, grey, fumered brown laid on 20mm thick cement mortar1:4 (1 cement : 4 coarse sand) and Jointing With Grey Cement Slurry @3.3 KgPerSqm Including Pointing in White Cement Mixed With Pigment Of Matching Shade etc Complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level Pastel P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) , conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked pastel solid plastic seat and lid (Hindware Cat. No.: 20154 (S-22) and Hindware sleek fresh cisternHealth faucet with 8mm dia, 1.2m long flexible tube & wall hook(Hindware Cat.No.F160001CP)

Providing and fixing ORISSA PAN WHITE IWC with integral type foot rest of Cat. No. 20004-HINDWARE or equivalent make etc., with 'P' or 'S' trap and all fittings like 10 litres capacity hindware make PVC flushing cistern, cutting and making good the walls and floors wherever required etc., complete as per direction of Engineer-in-charge

Providing and fixing Hindware make urinal basin of cat no 96008 with standard inlet and outlet pipe connections conceled in the wall, providing and fixing 15mm dia push type Bib cock (PRS-077) etc., including cutting and making good the walls and floors wherever required and servicing the unit etc. complete.

Providing and fixing of glass urinal partition (jaquar make: JSE CHR 810UC450X) on the wall using SS clamps of jaquar make all complete as per directions of engineer in charge

Providing and fixing white vitreous China over the counter wash basin (as per catalogue. No. 10105 of hindware) of size 370x310 mm with single 15 mm pillar tap (Jaquar make PRS-031) and waste coupling (cat.- 709) and bottle trap (ALD-769L300x190 Bottle Trap (with Internal Partition) 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange), angular stop cock CON-053KN and PVC connection pipe with brass unions of `Jaquar' make with necessary coupling etc. cutting and making good the walls wherever required etc., complete

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing liquid soap container of Jaguar make cat no SDR-WHT-DJ0010F with glass bottle with matching colout CP screws etc complete.

Providing and fixing 2-way Bib Cock with Wall Flange KUB-35037F of jaquar make and Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) 15 mm nominal bore ALD-CHR-579 with necessary fittings complete as directed by engineer in charge

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Providing two or more coats of plastic emulsion paint of approved brand and manufacture to give an even shade on new work as per manufacturer's specification including a coat of approved primer etc., complete

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work

Providing and fixing 35 mm thick flush doors confirming IS: 2202 (part-1) core of solid wood, construction with frame of pine wood with density of 700 kg/m3 with 5 ply construction with 1mm HPL sheet (laminate) on both sides and laminate pre pressed from factory, confirming IS 2046 with BWP grade adhesive treatment with phenol formaldehyde resin as per IS 848 norms ensure superior quality and performance of the doors with uniform thickness without undulation, wraping or bending. emission free as per E1 standard and eco-friendly fixed to the existing frames with 4 Nos.of 125mm long SS hinges etc., complete.

Providing and fixing 28mm thickness WPC door with one side decorative and other side balanced including ISI marked 3 nos Stainless Steel butt hinges (100mm) with S S screws as per direction of Engineer-in-charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes

Providing and fixing pipes of 75 mm dia, unplasticised-Rigid PVC pipes of sanitary grade including jointing with seal ring conforming to IS etc., complete.

Providing and fixing pipes of 110 mm dia, unplasticised-Rigid PVC pipes of sanitary grade including jointing with seal ring conforming to IS etc., complete

Providing and fixing 100 mm inlet and 75 mm outlet PVC trap with stainless steel grating (with or without hole for PVC waste pipe of CHILLY/NOWAY make) including the cost of cutting and making good the walls and floors.etc.,Complete as per directions of Engineer-in-charge.

Providing and fixing Door Closer C102 Single Door Closer godrej 60kg Cat.No.8340

Providing and fixing Dorset Door aldrop , with necessary screws etc.Atom 12 inch fancy aldrop chrome plated silver stain finish(wsa333-cpss)

Providing and fixing 200mm SS pull handle-D type with necessary screws etc.,complete.make by Godrej make code No 2801 or equivalent as per direction of Engr-in-charge

Providing and fixing 200 x 10 mm SS tower bolts with necessary screws etc., complete.make by Godrej make as per direction of Engr-in-charge

Providing and fixing bib cock with wall flange KUB-35037F of jaquar make conforming to IS:8931 : 15 mm nominal bore

Providing and fixing ALD-CHR-579 Jaquar allied series health faucet and flexible tube and wall hook.

Providing and fixing of Towel Rod Jaquar Metal Crome With round Flange

Providing and fixing FLR-CHR-5047N One way bib Cock with Wall Flange of jaquar make conforming to IS:8931 straight line model

Providing and fixing Double coat hook of Jaguar make cat no. AKB-CHR-35761P with matching CP screws etc complete

providing & fixing of SS floor jali 100mm thick etc complete as per direction of Engineer In Charge

Providing fixing SS signage plates for washrooms of approximate size 300x150mm

Providing and fixing Dorset Door Stopper DS HT Z or equivalent,with necessary screws etc. complete. Single rubber stopper

PART-B ELECTRICAL WORKS

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, Double pole, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 8 module (125mm x 125mm) GI box alongwith modular base & cover plate for modular switches in recess including associated civil works etc., as required.

Supplying and fixing of 3 module (100mm x 75mm), GI box alongwith modular base & cover plate for modular switches in recess including associated civil works etc., as required.

Supplying and fixing of 8 module base & cover plate on existing modular metal boxes etc. as required.

Supplying and fixing of 3 module base & cover plate on existing modular metal boxes etc. as required.

Supplying and fixing of modular 5A/6A switch on the existing modular plate & switch box including making electrical connections but excluding modular plate etc. as required.

Supplying and fixing of modular 3pin 5A/6A socket outlet on the existing modular plate & switch box including making electrical connections but excluding modular plate etc. as required.

Supplying and Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C

Supplying and drawing/wiring of 1 x 1.5 sq.mm size of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing/wiring of 3 x 4 sq.mm size of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 25 sq. mm (28mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply, installation, Testing and Commissioning of 450 mm Sweep (900 RPM) Heavy duty Exhaust fan with metallalic blades,Louver,mesh suitable for operation on single phase 230 Volt AC 50 Hz supply complete with all fixing accessories as required.

Supplying and fixing of 20 mm size of steel conduit on the wall/column/ceiling/truss as the case may be along with accessories as surface/recess system including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit including associated civil works as required.

Supplying of below mentioned specification LED luminaire & fixing of the same in the ceiling by providing required down rod/ chain, clamps screws/ anchor bolt-nuts, washers etc., making electrical connections, earthing etc., as required/ directed by engineer-in-charge. Mounting type :- Recess Type :- Circular LED System lumens :- Not less than 3600 lumens Luminous efficacy :- Not less than 100 lumens/watt Input power :- Consuming not more than 15W Color temperature :- Not less than 6500K Housing :- Pressure die cast alluminium/ CRCA Diffuser :- Specially frosted polycarbonate diffuser Driver :- Electronic Ref model :- Wipro Enterprises :- Elate LED - LD71-161-SML-65-FD or equivalent in approved makes

Supplying of Automatic Hand Dryer Indoor Wall - Mounted for dry the hands after hand washing automatically in Bathrooms Mounting type :- Wall mounting Machine Type :- Automatic Voltage:- 220V - 230V Frequency:- 50HZ - 60HZ Power:- 1800W Ref model :- Dolphy-DAHD0011 with equivalent in approved makes

CHARAN ELECTRICALS

KASHISH CONSTRUCTIONS

RAGHU COSTRUCTION

Rakesh kumar Engineers and Contractor