SPECIAL REPAIRS TO BLDG NO T 26 MD ACCN AT NAPIER LINES OF 68 MED REGT UNDER AGE B R N NO II OF GE N SECUNDERABAD

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Providing & fixing false ceiling with fully perforated 12mm thick micro tegular edged or 10mm thick square edged false ceiling at all heights with GRG (Glass Fibre reinforced gypsum) false ceiling tiles of size 595 x595 mm approved texture design and patterns having mositure content less than 2% , humidity resistance of 99% , NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (Part 4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T Runners of size 14x32mm of length 3000mm cross T of size 15x32 mm of length 1200mm and secondary intermediate cross T of size 12 x32 mm of length 600mm to form grid module of size 600 x600mm ,suspended frm ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm)i.e. 50mm long , 8mm outer diameter M-6 dash fasteners , 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjsuter of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications including dismantling complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

S & F Steel door including projecting type hinges, steel handle, complete,with glazing bars, dovetailed or welded complete all as specified and as directed.

S& F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and anging; also fastening confirming to Fe-410- W(Gde- E-250) complete all as specified and directed.

M & L Preparation of new or previously untreated steel or Iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over red oxide, zinc chrome primer complete all as specified and as directed.

M&L Preparation of new wooden surface exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick (below or above ground level) including removing debris beyond the premises including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etc and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Durastone / Endura heavy duty vitrified tiles not less than 12mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.16 sqm, in in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.

M&L Chequered cement concrete tiles of size 300mm x 300mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments complete all as specified and directed.

M& L 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L PCC (1:2:4) type B0, (using 12.5 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) coloured area of Each tile size 300mmx300mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L Vitrified Double Charged coloured tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM (1:4) complete all as specified. Make:Kajaria/Johnson as approved by GE.

Demolition Stone slabs /granite tiles laid in cement mortar of any description or thickness in floors, aprons etc. including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in CM (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete and dismantling existing stone slab of any description and type all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed.

S&F Providing & fixing of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 5 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work complete all as specified and as directed.

S&F Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of 33 x 56 mm Box section panelled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners are included in this item ) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified.

S&F 40mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).

S&F Second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Stainless steel butt hinges 100mm all as specified and directed. Note :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as directed and specified.

S&F in repairs 150mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required complete all as specified and as directed.

S&F in repairs floor door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F in repair Drapery curtain rod of stainless steel 25mm dia complete with stainless steel brackets and modular fancy side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy type, to be fixed with M S bracketscomplete all as specified and as directed.

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F 200mm long SS decorative soft close zero crank hinges, for kitchen cabnit complete all as specified and as directed.

S & F in repair 200mm long SS decorative soft close zero crank hinges, for kitchen cabnit complete all as specified and as directed.

S&F SS telescopic type ball bearing drawer channel of load bearing capacity not exceeding 45 kg anti-rebound function, manufactured with high grade steel for longevity for easy removal of drawer zinc plated for corrosion resistant suitable for the SS kitchen basket of size not exceeding 500mm complete all as specified and directed.

S&F SS kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 guage SS 304 grading of size 17"x20"x4" complete all as specified and directed. Make: 1st quality of SLEEK/ HETTICH/ EBCO

S&F SS kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 guage SS 304 grading of size 17"x20"x6" complete all as specified and direceted. Make: 1st quality of SLEEK/ HETTICH/ EBCO

S&F SS kitchen basket corrosion resistant, rust free seamless glossy finish, high quality product completely safe for storing food products and kitchen utensils of 18 guage SS 304 grading of size 17"x20"x8" complete all as specified and direceted. Make: 1st quality of SLEEK/ HETTICH/ EBCO

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203 mm, bowl size 405mm x 354mm x 203mm all as specified. Make Blue star

S&F in replacement stainless steel plate rack of size 609mm X 609 X 254 mm complete all as specified and as directed. Make :Blue star

S&F in repair for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed.

S&F in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

S&F in repair for corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

M&L Cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and as directed.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including P-trap (PVC) 100 mm dia., connection to flushing pipe, anti-syphonage pipe complete including making good to floor complete all as specified and as directed. Make: Cera/Prayag/Johnson Pedder.

S&F Viterous china wash hand basin white/coloured flat back size 630x450mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy type, to be fixed with M S brackets complete all as specified and as directed.

Taking down cement plaster/roof felt etc on brick or stone walls, concrete surfaces roof,chajja,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.including removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M & L Rendering 5mm thick CM (1:3) on brick work or concrete ceiling surfaces complete all as specified and directed.

M & L Preparation of new ceiling surfaces and applying two coats of OBD(oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

M & L Rendering 10mm thick CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparation of new plastered wall surfaces and applying two coats of oil bound distemper (oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

M&L Rendering 15mm thick in CM (1:4) using with water proof compound as per manufacturers instructions on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: Supply only WPC shall be measured and paid separately.

M&L Preparation of new plastered wall surfaces and applying two coats of acrylic exterior emulsion weather proof paint over a coat of primer complete all as specified and directed.

Supply only Integral waterproofing compound for waterproof plastering complete all as specified and directed.

S&F of 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F of 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 16 mm CPVC pipes SDR 11& Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S & F 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S & F 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

S & F PVC (SWR) floor trap 75mm dia, plain with SS grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F of Classic Glossy 6 Pin Cloth Hanger for Bathroom Wall Door Hooks For Hanging keys,Clothes Holder Hook Rail 6 complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

Taking down the old PVC(SWR) Pipes and accesories of any dia complete all as specified and directed.

S & F PVC (SWR) pipes 110mm bore double socketed, in any length with rubber ring joints, fixed on walls/trenches complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 75mm bore double socketed, in any length with rubber ring joints, laid in trenches /floors complete all as specified and directed.

S & F in repairs PVC (SWR) door Bend 75mm dia complete all as specified and directed.

S & F in repairs PVC (SWR) single T 75mm dia complete all as specified and directed.

S & F in repairs PVC (SWR) single T 110 mm dia complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) and stop valves for 20mm bore pipe, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends etc complete including dismantling existing water tank all as specified and directed. MAKE :-HSWS-0100-01-Pure of M/s Sintex

S & F in repair 150 X150 mm overhead shower complete all as specified and directed. Make : Jaquar or equivalent as approved by GE.

S & F in repair CP health faucet with 01 Mtr tube and hook complete all as specified and directed. Make : Jaquar or equivalent as approved by GE.

S & F in repairs 15 mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . Make : Jaquar or equivalent as approved by GE.

S & F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S & F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and directed.

S & F in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

Taking up or down any dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F in repairs PVC LDPE waste pipe 32mm dia 1m lengthcomplete all as specified and directed.

S & F in repairs 15 mm bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Make : Cera or equivalent make as approved

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables/poles etc., not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

M & L, PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation to manholes complete all as specified and directed.

M & L, PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, benching drain and surface channels etc., including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

M & L Pre-cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cover slabs for man holes etc., including necessary formwork, placed in position and set in CM (1:4) including necesaary TMT bars of 10 mm dia @ 150 mm c/c complete all as specified and directed.

M&L 200 mm bore RCC pipes, class NP2 laid and jointed with collar laid in trenches complete all as specified and directed.

M&L Concrete bed with using PCC (1:3:6) type C2 (using 40mm graded stone aggregate) to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested suitable for 200 mm bore complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in any type of soil complete all as specified and directed.

Removing excavated material/soil to a distance exceeding 50m and not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M & L Preparation of plastered or unplastered old decorated surfaces of walls and Finishing with two coats of Premium Acrylic Smooth exterior paint owith silicon additives of required shade applying @ 1.43 Ltr per 10 sqm over and inclding priming coat of exterior primer applying @ 2.20 Kg per 10 sqm complete all as specified and as directed.

M&L Preparing of plastered or unplastered old decorated surfaces of walls and applying two coats of oil bound distember (oil emulsion) over a coat of primer over and including 1.5mm thick wall care putty complete all as specified and directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M & L Point wiring with 1.5 Sq mm copper conductor single core FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through Surface PVC Conduit as per site requirment and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered suitable for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLS PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for one light/fan/Bell point controlled by one, one way switch 5A, SP complete all as specified and directed.

All as per Item No.110 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No.110 above but one 3 Pin 5 Amps switch socket Independt board.

All as per Item No.110 above but using 2.5 Sq mm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Switch piano, flush type single pole, one way 5 A ,230 Volts.complete all as specified and as directed.

S & F Switch piano, flush type single pole, one way 15 A,230 Volts.complete all as specified and as directed.

S&F Flush type Bell Push 5A, 1 Module capacity 230 volts. complete all as specified and as directed.

S&F Socket outlet flush type type multipurpose 2/3 Pin, 5 amps, 230 volts combined 2 Module complete all as specified & directed.

S&F Socket outlet flush type 3 Pin, 5 amps, 230 volts combined 2 Module complete all as specified and as directed.

S&F Socket outlet flush type multipurpose 2/3 Pin, 5/15 amps, 230 volts combined 2 Module complete all as specified and as directed.

S & F Calling Bell, AC, 230 volts, single pole complete all as specified and as directed.

S & F Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet suitable to work on 230 volts, 2 Module complete all as specified and as directed.

S & F Ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.

S&F Sheet metal enclosure vertical type MCCB DB TPN 4 way having degree of protection IP 43-IK 09 with metal double door , 415 Volts , flush type made out of 1.2 mm CRCA sheet metal, duly powder coated confirming to IS 8623 with suitable rated bus bar and includes 63 Amps MCCB with breaking capacity16 KA as incomer and 12 Outgoing SP MCB's with magnetic locking system complete all as specified and as directed. Note: MCB SP Shall be measured and paid seperately.

S &F Sheet metal enclosure MCB DB SPN 8 way with suitable rated bus bar 240 Volts double door with magnetic locking system complete all as specified and as directed.

S&F MCB, Single Pole Neutral (SPN) 40 Amps, 415 Volts of rupturing capactiy 10 KA, 'C' Series complete all as specified and as directed.

S&F MCB, Single Pole (SP), 6-32 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed.

S & F in replacement of wall mounted batten type LED light of 20/22 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistrand three core of suitable length from fitting to the ceiling rose complete all as specified and as directed.

S & F in replacement of Security Lights of 25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32/40 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and as directed. Make: Havells Model ENDURA SUNDOWN SL 25W LED 765 PASY BOPCIHD or equivalent model in Wipro/Philips/C&S/Bajaj/Surya

S & F LED light fitting 1 x 9W/ 1 x 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Wall mounted light fitting suitable for 10-20 watt LED bulb including taking down existing unserviceable light fitting complete with all accessories complete all as specified and as directed. Make: Havells Cat No LHDL06160099,or equivalent model in Wipro/Philips/C&S/Bajaj/Surya

S & F LED 12 Watt (Round type) elegantly designed sleek surface mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M & L Submain wiring with two runs of single core 6 Sq mm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one run of 6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note. Two runs of 6 sqmm cable, one run of 6 sqmm cable as earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M&L Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

Disconnecting and removing ceiling/exhaust/wall fan of any capactiy any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan complete all as specified and directed. Note: (a) Necessary repairs/ replacement of unserviceable parts shall be measured and paid seperately (b) Labour element for replacing of u/s parts deemed to be included in rate quoted.

M&L Rewinding of the ceiling/exhaust fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing of ceiling fan of any make and any sweep complete all as specified and directed including taking out burnt copper wire. Note: Old winding material is property of the contractor.

S&F in repair of Ball bearing/Brass bush of ceiling fan complete all as specified and as directed.

S&F in repair of Capacitor for ceiling fan complete all as specified and as directed.

M&L Painting of ceiling fans 48”/56” size complete at site, with super synthetic enamel paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed by Engr-in-Charge.

S&F Metal body Exhaust fan of 300mm sweep of 1200 RPM, Air Delivery 650 CMM single phase 50 HZ AC Supply with louvers and connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified and as directed.

S&F Electric water heater , storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc.alongwith brass check nuts complete all as specified and as directed. Make: Bajaj /AO Smith/Racold

Squad 7 Projects and Services Pvt Ltd (BID ID -3304221)

K LAKSHMAN SINGH AND CO (BID ID -3304684)

SAI RAM CONSTRUCTIONS (BID ID -3305960)

VACON INFRASTRUCTURES (BID ID -3314443)

M/s GM Constructions (BID ID -3308465)