REPAIR REPLACEMENT OF CERTAIN STEEL FURNITURE OF OTM ACCN AT INF LINES AND BG LINES JAMNAGAR.

Amount

Taking down existing unserviceable fitting/fixtures of ALMIRAH STEEL LARGE etc and refixing/welding with new items. FD applicable. (A) MS clips for shelves with screws/nuts & bolts. FD applicable

Locks ( 6 livers ) of make Link/Godrej or standard approved by Engr -in-Charge.FD applicable

Handle of CP. FD applicable.

Locking (mild steel) rod. FD applicable.

Locking box / device. FD applicable.

Ditto all as per item No. 1 above but for ALMIRAH STEEL MEDIUM. FD applicable removing from wall and refixing after repair.

MS clips with screws / nuts & bolts. FD applicable.

Locks ( 6 livers ) of make link/Godrej or standard approved by AGE. FD applicable

Handle of CP. FD applicable.

Locking rod. FD applicable.

Locking box / device. FD applicable.

Removing denting wherever required and filling with putty to make surface even and smoothening with emery paper and complete removal of existing painting and painting the new article with spray gun to make it new complete all as specified and directed..

Removing of unserviceable and worn out legs and providing new legs made out of 20 gauge MS sheet fabricated to shape as per existing almirah . (a) Almirah large steel FD applicable.

Almirah medium steel FD applicable.

Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type as required. (a) Almirah large steel FD applicable.

Almirah medium steel FD applicable.

Removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape and painting with existing pattern. (a) Almirah large steel FD applicable.

Almirah medium steel FD applicable.

Removing of old unserviceable nylon newar from charpoy G.I. 32mm and tightening the frame and making it suitable for fixing plywood top and providng 12mm thick (7 Nos of ply) commercial plywood ISI marked BWR type by using 2 number stiffeners made out of MS flat 40 x 5 mm thick 900mm long with 6mm dia 65mm long nut and bolt with washer (Total 08 Nos) to be provided at the drilling 02 Nos holes on each stiffeners with long rail/short rail and plywood. Two coats of synthatic enamel paint over coat of red oxide primer after black paint of stiffeners complete all as specified and directed by Engr - in- Charge. (a) Taking out existing unserviceable GI pipe three way elbow from GI pipe charpoy & Supplying and fixing new GI elbow, 32 mm bore, three way, medium grade, approved quality complete all as specified and as directed by the Engineer - in - Charge.

Taking out existing unserviceable GI pipe three way elbow from GI pipe charpoy & Supplying and fixing new GI elbow, 32 mm bore, three way, medium grade, approved quality complete all as specified and as directed by the Engineer - in - Charge.

Taking out existing unserviceable GI check nut from GI charpoy & Supplying and fixing new 32 mm GI check nut complete all as specified and as directed by the Engineer - in - Charge.

Taking down existing unserviceable GI pipe long rail of 32 mm bore from GI pipe charpoy & Supplying and fixing new long rail of 32 mm bore GI pipe, medium grade, of length as per existing long rail with proper threading complete all as specified and as directed by the Engineer - in - Charge. NOTE:32mm dia GI pipe will be issued under Sch. 'B' Free for fixing only

Taking down the existing short rails and making new short rail by cutting the existing GI pipe long rails 32 mm bore obtained from Item No. 6.03 , threading suitably and fixing with existing old elbow complete all as specified and as directed by the Engineer - in - Charge.

Making the existing unserviceable GI pipe short rail 32 mm bore of charpoy obtained from Item No.6.04 above and converting into legs by cutting, threading suitably and fixing with existing elbow including providing 3 mm thick MS base plate equal to outer dia of the pipe, welded at the bottom of the leg all as shown in drawing complete all as specified and as directed by the Engineer - in - Charge.

Hirachand Sunderji and co

Pooja Enterprise

motwani and associate

M/s Jagdish Machinery Stores

jitendra c joisar

M/s Balaji Enterprise