Construction of State Level Laboratory at Sidhpur in Tehsil Dharampur District Mandi (HP)

Amount

SCHEDULE I :- Providing, Supplying and installation of various equipments of specified make as per following techincal conditions, sepecification and requirement complete within all respect as per direction and to the entire sartisfaction of Engineer- in- charge.

PH Meter (both Lab based and portable type), Digital Display (0-14 range) of Hanna Instrument/UK Make Measure pH, mV and Temperature Automatic Calibration Auto Buffer recognition Auto temperature compensation Range : 0-14 pH Accuracy: +0.01 Accessories: pH electrode, Temperature Probe, electrode stand, Buffer solution, dust cover & manual, One spare combination electrode

TDS/ conductivity meter (both lab based and portable type ), Direct reading digatal display (CE Certified) of Hanna Instrument/USA Make Range: 1 micro S to 100 m S/cm Accuracy: ± 1 % of the F.S ± 1 digit. Display: LED,4 digits for conductivity, 3 digits for temperature Accessories. One spare Conductivity cell, Cell constant 1.0 Temperature probe, Electrode stand, dust cover , operation manual

Nephelometer (turbidimeter), Direct reading Range:0-100 NTU of Takahe Make Measurement Method Ratio turbidimetric determination using a primary nephelometric light scatter signal (90°) to the transmitted light scatter signal. Light Source 2100Q: Tungsten filament lamp 2100Qis: Light-emitting diode (LED) @ 860 nm Range 0 to 1000 NTU (FNU)

Digital balance, Single pan Cap. 200 gr. Tarring device Accuracy-0.0001 gm of Make • Capacity: 220g • Minimum display:0.001g • Repeatability (standard deviation): σ≤0.001g • Linearity: ±0.02g • Response time (approx.):1.0−1.2 sec • Ambient temperature:5−40°C/ 41−104°F • Temperature coefficient of" sensitivity (10−35°C):±3ppm/°C • Pan size (mm):100×100 (mm) • Weight (approx.): 2.2 kg • Power requirements: AC adapter; 90V−264V, -15%−+10%, 50/60Hz • Standard accessories: Simple windbreak (brown smoke color) • With certificate from Legal Metrology Department

UV-Visible Spectrophotometer, Should Cover wavelength of important of KLAB/Shimadzu/Agilent/Analytic Jena/Perkin Elmer or equivalent Make Quantitative and qualitative analysis of organic and inorganic compound including pesticides, heavy metals etc. in ppm level Brief Description of Equipment Microprocessor Based Wavelength Range: 190 to 1100 nm with LCD/LED display • System should be double beam UV-Visible Spectrophotometer with 8-Cell Changer • The monochromator should be blazed holographic grating with 1200lines/mm, • The Detector should have Si-diodes/CCD or equivalent • System should have Wavelength range from 190 to 1100 nm or better • System spectral Bandwidth should be 1 nm (190 to 1100 nm) • Wavelength Setting should be 0.05 nm • Wavelength Accuracy should be ±0.3 nm • Wavelength Repeatability should be <± 0.1 nm or better • Scan Speed max 6,000 nm/min or better • Photometric Range Absorbance : -4 to 4 Abs

• Transmittance range should be : 0 % to 400 % • Photometric Accuracy should be less than ± 0.005 Abs at 1.0 Abs • Light Source Tungsten Halogen Lamp & Deuterium Lamp • Photometric repeatability ± 0.0002 at 0.5 Abs • Baseline stability: < 0.0003 Abs/h • Operating system (OS): system should have touch screen and Windows 10 (Embedded PC) option also. • Cuvettes with 3.5 ml - 1 Pair should be quoted. • Computer: workstation with Processor Intel Core i5-4670 Processor (3.4GHz, 6M Cache), HDD 1TB 7200RPM, Graphics: Intel HD Integrated Graphics, Memory 4GB X 2 DIMM 1600MHz, Optical DVD Recordable, Wireless WiFi Operating System Window 7 or above, cordless mouse and Keyboard should be quote .

Refrigerator, 295 lts. Cap. (LG / Samsung) of LG/Samsung Make Vertical cooler (with front glass door) Should be able to maintain 4 C Capacity: 500 L Accessory: Voltage stabilizer

Muffle Furnace Finishing: Powder Coated Material: Mild Steel Heating Range: Upto 1150 degree Celsius Heating Space: 120 to 350 cubic inches Power: 230 V, 50 Hz, Single Phase

Voltage Stabilizer/inverters of make (10kw) Online 20KVA UPS system with isolation transformer for uninterrupted power supply.

Electric Hot plate (Digital), Big Size CE Certified Screen Type-Digital Plate Dimensions-300 x 300 mm Heater Power-600 W Minimum Set Temperature-50 Deg C Display Resolution-1 Deg C Max Plate Temperature 300 Deg C

Heating mantle, Cap. 1 Lt. Heating Mantle 1000ML in 220 Volt Item Shape: Round Dimensions : 28.2 x 19.4 x 17 cm; 1.58 Kilograms

Water bath, Big size (12 hles) Temp. 500 degree to 1000 degree Centigrade CE approved. 1. Double walled outside made of of MS duly powder coated and inner chamber and lid made of stainless steel. 2. The gap of 25mm between outer and inner walls is insulated with mineral wool. The top of the bath and the concentric rings are made of SS 304. 3. The temp. Is controlled by Thermostat/Microprocessor based PID Digital temp. Controller. Temperature Range: Ambient to 100 deg.C. 4. The bath is provided with two indicating lamps, concentric rings, ON/OFF switch, wire and plug, without thermometer. 5. Capacity: 20 L 6. Temperature Range: Ambient to 100 C with accuracy of + 0.5 C

Hot air oven, Stadard make- big size Double walled, outer made of GI duly powder coated and Inner SS 304. Perforated adjustable shelves. With provision to keep Thermometer. Temperature range (+) 50 to 250 Deg. Celsius, Accuracy ±1Deg, controlled with Microprocessor based PID controller. Fitted with air circulation fan.Preferable Size- 455X455X605 mm, 605X605X605 mm.

Bacteriological Incubator, Temp. Control Device(Range 0 to 50 degree centigrade) Medium Size CE Certified. Inner chamber sizes in mm: w x d x h = 455 x 410 x 610, capacity in cu. Ft. : 4 cu. Ft., Material: Inside Stainless steel chamber epoxy coated outside Capacity Approx. : 112 ltr., Range: 35 to 60 o C, thermostatically Shelves: 3Nos. controlled S.S. Camber, CO2 / Air mixer nozzle is provided

Autoclave, Medium Size Steel Cabinet Double walled construction, outer made of SS 304. Inner chamber made of SS 304 with SS 304 lid. Unit fitted with Double safety radial locking system with paddle lifting device, made of MS chrome plated, with built-in safety valve, pressure gauge, pressure release valve and water level indicator. Pressure adjustable from 5 PSI to 20 PSI with an accuracy of ± 1 PSI, with Automatic pressure control switch. Supplied complete with stainless steel basket, cord and plug. The Autoclave should have electrically heated by immersion type heaters suitable to work on 220 volts single phase 50 cycles. The pressure inside the chamber should be variable from 5 PSI. to 20 PSI Working Temperature: 121°C Hydrostatic Pressure: 2.5 kg/cm sq. The unit is fitted with steam release valve, spring loaded safety valve , water inlet and water outlet valves, water level indicator , pressure gauge, electrical control box, fitted with toggle switch, indicating Neon lamps and steam release valve, paddle lifting device and Automatic Pressure Switch. Automatic Pressure Control Switch – To cut-off the current from the heating elements, when the desired/set pressure value level is attained inside the chamber and restarts the mechanism once the pressure inside the chamber falls from the desired level. Automatic Water Cut-of Device To protect the heaters from running dry and to ensure that the machine is automatically switched off in case the desired water level falls below the prescribed level.(Optional) Programmable Digital Temperature Indicator cum Timer with Alarm System : Programmable Microprocessor based PID digital temp. indicator cum controller with digital timer with automatic steam release after completion of cycle.

Magnetic stirrer with hot plate, With Speed Control and Teflon Paddle CE certified, Beaker capacity up to 2000ml, RPM up to 2000 ml (without load), Hotplate temperature ambient to 100°c, Heater: 230 watts, Power: 220/230V AC, Dimension 182 mm x 235 mm x 142 mm, Rotor magnet, Top Plate size: 10 X 10 cm, Top Plate Material: Ceramic

Microscope, Binocula Laboratory Binocular Microscope • Magnification - 50x – 1000x. • Observation - Binocular 45˚, 360˚ rotatable, with interpupillary and diopter adjustment. • Stand - A rigid & heavy stand. • Focusing - Coarse and fine focusing by conveniently placed separate knobs 1 div. 0.002 mm. • Stage - Horizontal Mechanical stage 120 x 140 mm. with fine vernier graduation. Designed with convenient co–axial adjustment for slide manipulation through 50 x 70 mm. • Illumination - The illuminator incorporated 3W LED lamp. • Condenser - Sub stage Abbe filter holder N.A. 1.25 condenser with Iris diaphragm and swing out filter holder focusable by rack & pinion. • Nose Piece - Quadruple revolving nose piece with positive click stops. • Objectives - Achromatic 5x, 10x, 45x & 100x oil (SL). • Eye Pieces - W.F. 10x Anti Fungus Coated.( Paired) F.O.V.18 MM.

Filter Paper 125mm (Pack of 100 pec.) pore size: 20-25 μm (Particle retention) material: circles, cotton filters (high-quality cotton linters)

Flame photometer Elico/Kniss/Systronics/PC Tech make Display: 20 x 4 line Alphanumeric Backlit Display. Range: Na, K, & Li 1-100 ppm and Ca15-100 ppm Dimensions-290 x 255 x 210 mm (L x B x H) (Approx.) Flame System: LPG Dry Oil Free

Vortex Shaker Variable Speed Control Max Speed 300 ppm

Inductively coupled plasma-mass spectormetry (ICPMS) of reputed make conforming to ISO/CE certified standards. The ICP Mass Spectrometer for heavy metal and other elements measurements in drinking water, potable water and any sample matrix from Jal Shakti Vibhag. 1. Purpose- Analysis of trace metals in drinking water & ground water as per BIS, FSSAI and related regulatory guidelines. 2. Equipment must be the latest model and design as per the internationally approved testing & measurement parameter. 3. Basic Design-Latest and advanced technology bench-top ICP-MS with cell collision & reaction mode. The system should complete in all respects with built in features of hardware & software. 4. Sample Introduction – • Integrated computer controlled minimum 3/4-channel peristaltic pump. • Integrated Peltier cooled spray chamber (-5 to 20°C or or better) to analyze all kind of specified samples and comply all national and international regulations. • Integrated Software controlled Dilution: Should have suitable automated controlled integrated dilution with 10 or more fold dilution capability to analyze all kind of specified samples and comply all national and international regulations. • Standard Kit to be offered along with splitter & tubing set 5. Plasma and Torch Setup • RF power range: 500-1600W or better • RF Generator: 27/40 mhz • Torch Alignment: X,Y,Z automatic and computer controlled • Flow Controller: Should have at least 2 or more flow controllers for control plasma, auxiliary makeup, carrier gases and makeup/dilution gas. 6. Interface

• Cone Interface: ICPMS system must have Single cone interface to achieve all guaranteed performance specifications ICP-MS instrument without any manual intervention or changeover for high matrixes, high sensitivity and high TDS samples • Ion Lens: off-axis ion lens or suitable design to provide high ion transmission and low backgrounds to deliver superior detection limits, sensitivity and oxide ratio. 7. Collision Reaction Cell • System equipped with best in line technology • Capable of operating in Standard (No gas), Collision modes, Reaction mode (Pure or Premix gas form) should be able to remove polyatomic interferences as per all national and international regulations. • Fully automated and software-controlled changeover between No gas, Collision and Reaction mode without any manual intervention • Separate gas lines with dedicated flow controller for Collision and Reaction gas with automatic control must be supplied in ICP-MS to comply all national and International regulations (i.e. He,H2,O2,CH4 & NH3 )

8. Mass Analyzer and Detector • Quadrupole must be minimum 2.5 MHz or better • Mass Range: 5-258 amu or better to analyze all elements. • True Linear Dynamic: 11 orders <0.1cps >10¹ºcps or better without any hardware interchange or software adjustment • Dwell time: 100 µs or better • Scan speed: >3000 amu/s from Li to U plus 40 intervening masses or better 9. Detection Limits: • Low mass (Be/Li) : ≤0.5 ppt or better • Mid mass (Y/In) : ≤0.1 ppt or better • High Mass (Ti/Bi/U): ≤0.1 ppt or better 10. Sensitivity: (Guaranteed factory specifications will be considered & not the typical performance) • Low mass (Be/Li) :≥55 Mcps/mg/L or better • Mid Mass (In/Y) :≥200 Mcps/mg/L or better • High Mass (Te/Bi/U) :≥ 250 Mcps/mg/L or better • U Typical sensitivity:≥ 300 Mcps/mg/L or better • Oxide ratio (CeO+/Ce+) : <2% • Ba++ or Ce++/ Ba or Ce :<3 or better • Background mass 4.5/9/220: No gas <1 cps • Short Term Stability :<3% RSD or better

11. Vacuum system- Suitable turbo molecular pump, corrosion resistant and protected. 12. Software- Windows based software User-friendly that guide users through method and sequence development and method templates for rapid development of commonly used methods. (The quoted software should be 21 CFR, Part-11 with QA/QC calculation capacity & minimum (Two) offline license. 13. Standard Accessories Required i) Autosampler: Minimum 200 vials or more samples capacity, Complete sealed/covered enclosure. 1000Nos vessel. ii) Setup and Detection Solutions: All setup and detection solutions quoted should be certified, traceable to NIST. iii) NIST calibration standards: A. 1643 NIST traceable standard for trace metals in drinking water , 500 ml B. 23 element surface water standard ,250 ml C. 22 Elements 6020 EPA standard for water , 250 ml D. Tuning Solution, 125 ml E. Genuine Licensed Software for ICPMS and IQ OQ Documents F. PC & printer.MS office should be offered. 14. Consumables (All the consumables should be quoted & specified with OEM alongwith specified qualities.) • Ni sampler & Skimmer Cone (02 sets) • Standard Injector & Torch -05 Nos. • standard spray chamber -03 Set • Standard Nebulizer: 02 Set

• Standard Peristaltic pump tubing for drain Pk/12 -15 set • Standard Peristaltic pump tubing for samples Pk/12 -15 set • Peristaltic pump tubing for ISTD Pk/12 -10 Set • PFA/suitable & rinse tubing -10 Set • Oil Element/Mist Filter -01set • Pump oil – 1 LTRS • Tubing for Drainage -10 Set • Tubing for reaction cell gas (if applicable), 1/pk (08 Nos) • RF coil -02 Set • Cone cleaning solvent/chemical -3.5 ltr • Swab-cotton tipped both ends pk/100 – 3 pac • Autosampler Vials -2000 Nos. • Autosampler Tubing set p/12 -05 Sets • Autosampler Probe: 02 Set • Tubing for spray chamber drain -10 m • Fluid filter for chiller -02 sets 15. Warranty- Three Years on complete supplied system from the date of installation along with UPS, PC, Printer, Gas Panel. 16. Training - Three Days training for staff at our laboratory. Five days training at vendor’s international training center including boarding, lodging & travelling cost (for Two Personals). 17. All supporting published documents must be enclosed for specified specifications, along with published tender specifications. 18 Price must be quoted in INR and F.O.R Site including clearance and Transportation. 19 User list has to be attached for the quoted/equaling model.

UV Laminar Air Flow chamber for bacteriological analysis. • Cabinet is fabricated out of the Stainless Steel 304 grade • The system is microprocessor based. The microprocessor displays the inflow and down flow air velocities in real time on an LCD display. • Motor automatically adjust the air flow speed to ensure continuous safe working condition. Air flow as per requirements of Bio safety regulations in respect of atleast BSC II A level cabinet. • Noise level less than 65 decibel. • Efficiency of HEPA filter is almost 99.97%. • Working table made of SS 3004. • Front of the cabinet shall be angled to help minimize glair. • Fluorescent lamps for lighting of the interior of the cabinet. • UV light is also fitted to disinfect the interior of the cabinet. UV light shall be programmable to allow for specific exposure time from 0 to 24 hrs. Automatic UV switch OFF‘ on opening of front window. The front window is made of laminated safety glass to protect against leakage of UV rays and to ensure containment of potential hazardous material. • Safety alarm / safety display for Low air velocity and Faulty exhaust fan. • Power input 220-240 V AC, 50 Hz fitted with Indian plug. • Movable stand • Dimensions: 2’x2’x2’, 3’x2’x2’, 4’x2’x2’ and 6’x2’x2’

Micron Filtration assembly with a Vacuum pump of Borosil Make Chemical Duty Pump, 220 V/50 Hz, AC powered and source of vacuum to 585mm/ 23 Hg (at mean sea level) or pressure to 4 bar/58 psi for filtration of liquids or other continuous or intermittent use with all types of filter holders

Plate Count and colony counter of Stadard make Digital Colony Counter for quick and accurate counting of bacterial and mould colonies in petri dishes. It should be designed for rapid and accurate counting of bacterial and mould colonies. Simply place the petri dish on the illuminated pad and touch the dish with the pen provided to mark each colony in turn. This causes a count to be registered on the digital display and audible tone confirms each count made. Marking the dish with the pen avoids missing colonies or double counting. The digital count on the display can be reset manually any time by pressing the RESET key provided. Optimum viewing of colonies is aided by peripheral glare-free illumination. An integral magnifying glass provides for easier counting of small colonies. TECHNICAL SPECIFICATIONS Display : 4 Digit, 9999 Max. Count ; 3 Digit, 999 Max. Count Dish Size : 110 mm Magnification : x 1.7 Memory : 50 test Counting Plate : illuminated wolfhugel Power : 230V-10% AC, 50Hz, 40W Accessories : Marking Pen- 1 No. ; Magnifier Lens- 1 No. SALIENT FEATURES Count Correction facility 110 mm Dia magnifying glass Audible confirmation of each count. Uniform glare free illumination Digital readout from 0-9999 Auto maker pen.

LPG burners & fittings ISI Marked/BIS/Equivalent as per the site layout and drawing.

Field Kit (pH, Conductivity, TDS &DO) System to be used for water quality field applications measuring simultaneously two of the following parameters: pH, conductivity/TDS & Dissolved Oxygen (DO) 1. It should be waterproof portable logging multiparameter meter that monitors up to 12 different water quality parameters including 6 measured and 6 calculated. 2. The microprocessor based multi-sensor probe allows for the measurement of key parameters including pH, ORP, conductivity, dissolved oxygen, and temperature. 3. The probe transmits readings digitally to the meter, where data points can be displayed and logged. 4. It should be supplied with all necessary accessories and packaged in a durable carrying case. 5. It should have minimum 12 Parameter Dot Matrix Display 6. Multi-sensor Probe should be quoted 7. Quick Calibration

Coolbox with icepacks Ice Box of 15Ltr Make: Cello or Millton

Fume Coup board, Material-Stainless steel Floor Area-0.75 m x 0.75 m Compressed Air Supply 2 Bar, 2.5 CFM Electricity-1 Phase,220 V, 50 Hz AC

Extraction thimble, Temperature Resistance-400 DegC Color-Transparent Material-Borosilicate Glass 3.3 Maximum Temprature Capacity 400 degC ISI Marked/BIS/Equivalent

Digital temp sensor Digital thermocouple with LED/LCD display.

Stop watch Digital with LED/LCD display.

Thermometers of NPN Make, Temperature Range -50.0 to 150.0 ºC / -58.0 to 302 ºF Temperature Resolution 0.1 ºC (-50.0 to 150.0 ºC) Temperature Accuracy ±0.2 ºC (-30.0 to 120.0 ºC) Automatic Shut-Off 8 min (default), 60 min or OFF Battery Type/Life 1 x CR2032; approx. 2000 hours of continuous use Environment -30 to 50 ºC (-22 to 122 ºF)

Weight Box, Stainless Steel Laboratory weights certified by BIS 1mg to 200 gm class F1 (1mg to 200 gm), With calibration certificate from NABL Certified Laboratory

Double distillation Apparatus/ Ultrapure Water Purification system to provide type1/type 11 Water for sophisticated instruments, Material: Stainless steel Capacity:1.5 litre/hr, 2000 W. Power supply: 220VAC ± 25%, 47 to 53 Hz Protection: Automatic power cut off at low water level Conductivity: The conductivity after distillation shall be equal to or less than 0.01mS/cm at 25oC

Bulb rubber (10mm) ISI Marked/BIS/Equivalent

Kjeldal distillation apparatus, Kjeldahl Apparatus is used to determine organic nitrogen (N2) and protein contents in Water samples and chemical substance. Units of test-6 test Heater-Mantle type Flask capacities-300 ml / 500 ml Max. temperature-350°C Rating-200 watts Construction-MS powder coated Accessories - Glass ware - Clamps - Lead fume duct - Condenser rack

Bulb rubber (20mm) ISI Marked/BIS/Equivalent

Bulb rubber (25mm) ISI Marked/BIS/Equivalent

PCR mechine, Preferable Specifications: • Sample Capacity 96X0.2mL PCR tube, 8X12 PCR plate or 96 well plate • Heating Temperature Range 4-105℃ • Lid Temperature Range 30-110℃ • Temperature Display Accuracy ±0.1℃ • Temperature Control Accuracy [at 55℃] ±0.3℃ • Temperature uniformity[at 55℃] <0.3℃ • Max. Heating/Cooling Rate 5℃Sec • Gradient Temperature Setting Range 30-99℃ • Gradient Range 1-42℃ • Adapter block material aluminum • Display 7” LCD 800x480 • Input Touch panel • User defined file system Max. 30 segments 99 cycles max. 16 folder and 16 files each folder • Power off protection Yes

Deep Freezer(-20 oc), CE certified, Vertical deep freezer (-20 C) Digital/mechanical temperature control, alarm system, environmental friendly. Capacity280 Ltr. Or more, CFC free refrigerant, Microprocessor controlled temperature, caster wheels, voltage stabilizer, RS 232/RS 485 interface for temperature, date and time. Accessory: Voltage stabilizer

Micropipette (10ml) of Borosil Make, ISI Marked, A class, Variable volume air displacement single channel pipettes requiring both precision and accuracy. 1-5 ml and 1-10 ml and stand different size.

Centrifuge, Labpro centrifuge • General purpose bench top laboratory centrifuge machine. • Heavy duty CRC construction finished with powder coating. • Double walled ABS injection moulded lid which is light weight to avoid accident. • Inter lid lock and metallic centrifuge bowl for safety. • 2 lines of 16 character LCD display of RPM, RCF, set time and run time. • Microprocessor based programmable speed control from 500 to 5200 RPM depending upon the type of rotor and digital timer (0-59 minutes). • Last test parameter recall and display automatically on LCD. • Low noise, smooth and soft start and stable speed output. • Wide variety of rotors and reduction adopters available on demand at extra cost. • The lid is light in weight to avoid accident due to heavy weight metallic lids during operations. • Motor fitted on anti vibration spring pads. Supported with rubber covering from inside and outside. • Maximum Speed 5250 RPM • Maximum RCF ‘g’ 3600 • Maximum Capacity 400 ml • Motor Universal Motor (fitted with carbon brushes) with rotor should be quoted.

Bulb rubber (50mm) ISI Marked/BIS/Equivalent

Burette stand of Borosil make, Low Expansion Borosilicate I.D. control tubing. Ÿ Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1997 and ISO 385. Supplied with PTFE stopcock, Boroflow stopcock and Straight Bore Glass Stopcock

Spatula S.S., 200 mm, Compatible for Analytical Grade use, ISI Marked/BIS/Equivalent

Gas chromatography-mass spectrometry (GC-MS) of reputed make conforming to ISO/CE certified conforming to international standards 1. Gas Chromatography: A. GC Oven • Temperature range- 4 Deg above ambient to 450°C • Ramp rate- 120°C/min. or better • Heating Ramps Atleast 20 ramps/programming steps or more. Cooling ramps also required to cool down GC • Cooling-Fast cooling of oven 450 to 50 Deg C within 4-5 minutes or faster 2. GC Inlets - 2 Nos of Split/Splitless Injector – 1 No. and Programmable Temperature Vaporizer (PTV) - 1 No. • Temperature range up to 4000C or better. • Split ratio setting range: up to 7500 or more • Pressure setting range: 0 to 145 psi or better for Split/Splitless and 0 to 100 psi or better for PTV with increment/resolution/control of 0.001 psi for the entire pressure range • Compatible Columns with different Internal Diameters from 0.1 to 0.53 mm or suitable for all capillary columns (50 to 530um i.d.) 3. Gas saver mode to reduce gas consumption, Electronic septum purge 4. Electronic Pressure/Flow control: The pressure and flows must be independently controlled for all injectors and detectors through software only. System should have constant Pressure, constant flow.

5. Auto-sampler: Liquid auto-sampler with 100 vials capacity, for 2 ml Vial capacity 6. MS Specifications: Fully PC controlled Mass spectrometer with highly efficient turbo molecular pump with EI • Mass Analyzer: Single Quadrupole Mass Filter with pre-filter/pre-rod, Compatible with 0.1 to 0.53 mm ID Columns for various samples/applications or Heated quadrupole • Mass range: 10 to 1050 amu or better • Scan speed: 20,000 amu/sec or better • Mass Resolution: Unit or better • Mass axis stability- Should be +/- 0.10 u/48 hrs or better. • EI voltage: Up to 150 eV or more • Ionization/Emmission current: Variable 10-150 μA or better • Ionization Mode: Electron Ionization • Sensitivity (Signal/Noise): EI scan: 2000:1 S/N for 1 pg/ μl OFN (To be demonstrated at the time of installation) or IDL (Instrument detection unit) in EI SIM Mode, with helium carrier gas and 8 sequential 10fg OFN splitlers injection, monitored for M/Z-272 to produce following IDL ≤ 10fg or better • Pumping System: Highly efficient turbo molecular pump with minimum capacity of 250 liter/sec or higher to build vacuum and to evacuate system as soon as possible (As per system requirement) • Libraries (Original): Vendor to quote following Original, Licensed & latest version of Library/database with OEM part/catalogue number: NIST 2020 or latest

7. Software: 64 Bit Advanced Chromatographic integration software. Software should be user friendly & simple for data handling with feature like easy to use report publisher, online help and answer wizard, GLP and fully compatible with Windows 10. Simultaneous Scan/SIM mode. Software should have provision for calculation of Retention Indices and Retention Time Alignment/Automatic Adjustment of Retention Time/Retention time locking software with part number. All accessories like injectors, detectors, GC, MS, Auto-sampler, should be controllable from a single software only. (Complete controll of perameters for GC) 13 Additional Consumables a) Injection Port Septa – 400 Nos. b) Glass Insert for Split & Splitless (10 Nos. Each) c) Vespel Ferrule 0.4 mm – 30 Nos. d) Vespel Ferrule 0.5 mm & 0.7 mm – 10 Nos. Each e) Graphite Ferule 0.5 mm – 10 Nos. f) Graphite Ferule 0.8 mm – 10 Nos. g) Manual Syringes - 10 uL (5 Nos.) h) Liquid Auto-sampler Syringes – 10 Nos. i) Auto-sampler Vial & Septa - 1000 Nos. j) Filaments – 6 Nos., Glass Wool – 1 No. k) Column Cutter – 1 Nos., O-Ring – 50 Nos. l) Column Nut – 20 Nos., Pump Oil – 5 Liters 14 Utilities: a) 30-meter capillary columns (Rxi-5SilMS – 2 Nos. or equivalent), Rtx-200/17 – 1 No., Rtx-624 – 1 No. or equivalent

b) Gas cylinders with dual stage regulators for Helium – 2 Nos. each c) Wall mount Gas purification and control system for gases, Gas Manifold d) Branded i7 PC, 8 GB RAM 1 TB HDD, Windows 10 Pro, 32-Bit MS Office Excel 2016, 21” Monitor and Laserjet Printer e) 10 KVA online UPS with 60 min back up for complete system 15. Accessories for sample preparation: • Microprocessor controlled Ultrasonication bath with Tank Capacity: Approx. 4 Ltr. Stainless steel with digital timer and speed with one-year warranty • Vortex Mixer of Reputed make and N2 Evaporator of 20-25 sample processing capacity. Warranty: 1 year • Rotary Evaporator with Vacuum pump, vacuum controller and chiller • Micropipette- 1ml to 10ml, 0.1 ml to 1.0 ml, 0.02 ml to 0.2 ml, 0.002 ml to 0.02 ml • Refrigerated Centrifuge of reputed make with 15 mL and 50 mL rotor. Warranty: 1 year • Balance with least count accuracy of 0.1mg • Refrigerator for storage of CRMs, pH Meter, Hot Air Oven • Solvent filtration Kit with vacuum pump and Syringe filter • Water Purification System Type I & III 16. Warranty: Two Years warranty on GC-MS System

SCHEDULE II :- Providing, Supplying and installation of various glasswaress of specified make as per following techincal conditions, sepecification and requirement complete within all respect as per direction and to the entire sartisfaction of Engineer- in- charge..

Conical Flask of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Beakers of Borosil Make, Should be made from Low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Pipette (without graduation) of Borosil Make, Should be made from Low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Pipette (Graduated) of Borosil Make, Should be made from Low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Burette (Ordinary) of Borosil Make, A class, accuracy: ±0.05 ml, clear borosilicate glass and stand

Burette (automatic) of Borosil Make, Low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use.

Desiccators of Borosil Make, Material: Borosilicate Capacity: 6-5400 ml Beaker Temperature Resistance: 570 m ohm

Reagent Bottles of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Sample bottles (Food Grade Plastic ) of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Test Tube of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Durham tubes of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Round bottom flask of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent. Temperature Resistance-400 DegC, Color-Transparent, Material- Borosilicate Glass 3.3

Measuring Cylinders (graduated) of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Measuring Flask of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Funnels of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Porcelain dish of Borosil Make, Compatible for Analytical Grade use

Mediun size, 80 mm, Glassware ISI Marked/BIS/Equivalent

Big size, 105 mm, Glassware ISI Marked/BIS/Equivalent

Crucibles, Compatible for Analytical Grade use, ISI Marked/BIS/Equivalent, Capacity (ml): 50ml, Shape: Circular, Type Of Glassware: SILICA

Bucher Funnel Muslin Cloth dishes, Compatible for Analytical Grade use

Stadard joints of Borosil Make, Compatible for Analytical Grade use, ISI Marked/BIS/Equivalent

grouted

Bends

Glass roads, Compatible for Analytical Grade use, ISI Marked/BIS/Equivalent

Glass beads, Compatible for Analytical Grade use, ISI Marked/BIS/Equivalent

Nessler cylinders of Borosil Make, Should be made from low Expansion Borosilicate I.D. control tubing. Individually calibrated by automatic calibration process. Comes with highest quality standard according to IS 1042. Compatible for Analytical Grade use. ISI Marked/BIS/Equivalent

Thermometers of NPN Make, Compatible for Analytical Grade use, ISI Marked/BIS/Equivalent

Wash bottle of Borosil Make, Should be as per the BIS/EN/ASTM Norms and should be fully compatible with the analytical grade use for analytical instruments.

Separating flask of Borosil Make, Should be as per the BIS/EN/ASTM Norms and should be fully compatible with the analytical grade use for analytical instruments.

BOD Bottle, Compatible for Analytical Grade use, ISI Marked/BIS/Equivalent, Capacity-500 ml, Usage/Application-Chemical Laboratory, Material: Glass, ISI Marked/BIS/Equivalent

Separatory funnels, Compatible for Analytical Grade use, ISI Marked/BIS/Equivalent, Material-Glass, Capacity-1000ml, Usage/Application-Chemical Laboratory, Stop Cock Bore-Yes, ISI Marked/BIS/Equivalent

Petri Dishes of Borosil Make, Should be as per the BIS/EN/ASTM Norms and should be fully compatible with the analytical grade use for analytical instruments.

Pressure vessel ( 50 Ltr Capacity) of Borosil Make, Should be as per the BIS/EN/ASTM Norms and should be fully compatible with the analytical grade use for analytical instruments.

Stoppered Bottles for Dissolved Oxygen of Borosil Make, Should be as per the BIS/EN/ASTM Norms and should be fully compatible with the analytical grade use for analytical instruments.

SCHEDULE III :-Providing, Supplying and installation of various Chemicals must be Analytical Grade only, should be supplied with MSDS and safety certificate as per following techincal conditions, sepecification and requirement complete within all respect as per direction and to the entire sartisfaction of Engineer- in- charge.

Acetic acid, glacial, 500 ml

Alizarin Red S, 500 g

Ascorbic acid, 100 g

Absolute alcohol, 500ml

Aluminium Potassium Sulphate, 500g

ammonium Acetate, 500g

Ammonium Chloride, 500g

Ammonium Hydroxide, 500g

Ammonium Purpurate/ Muroxide, 100g

Arsenis Trioxide, 500g

Barium Chloride, 500g

Bromocresol green indicator, 100g

Boric acid, 500g

Calcium Chloride (Fused), 500g

Calcium Chloride, 500g

Ethylenediaminetetraacitic Acid (EDTA), 500g

Erichrome Black T, 10g

Erichrome cyanine: R, 10g

Ferrous Ammonium Sulphate, 500g

Hydrochloric Acid, 2.5 L

Hydroxylamine Hydrochloride, 500ml

Hydrogen Peroxide, 500ml

Electrolytic Iron, 100g

Lead Acetate, 500g

Methyl orange indicator/ P & R Indicator, 100g

Phenolphthalein indicator/ Methyl Red Indicator, 100g

Potassium Hydroxide, 500g

1-10, Phenanthroline, Monohydrate, 10g

Potassium Permanaganate, 100g

Potassium Iodide, 500g

Potassium Chromate, 500g

Potassium Hydrogen Phthalate, 500g

Stannous Chloride, 100g

Silver diethyl-dithio-carbamate, 100g

Sodium Hrdroxide, 500g

4-Aminoantipyrine, 25g

Sodium Acetate, 500g

Sodium Thiosulphate, 500g

Starch (Soluble), 500g

Sodium Fluoride (Anhydrous ), 500g

Sodium Arsenate, 100g

SPADNS, 100g

Zirconyl Oxycloride, Octohydrate, 100g

Sodium Sulphate(anhydrous), 500g

Sulphuric acid (sp. Gr.1.84), 2.5 L

Sulphuric acid Fuming) Oleum (if Specifically required), 250g

Sodium Chloride, 500g

Potassium Dicromate, 500g

Calcium Carbonate (anhydrous), 500g

Phenol, Whte, 500g

Potassium Nintrate, 500g

Sodium Sulphate, 500g

Phindicatorpapre, Range 2-14 With comparator

Methylated Spirit, 500g

MacConkey broth, dehydrated (Hi-Media), 500ml

Total Ionic Strength Adjustment Buffer (TISAB), 500ml

Oxalic acid, 100g

Silver Sulphate, 100g

Aluminium Chloride, 500g

Alkaline Citrate, 50ml

ammonium molybdate, 100g

Nitric acid

Ammonium metavanadate, 100g

Anhydrous Potassium Nitrate, 100g

Sulphanilamide, 100g

Sodium Nitrate, 100g

Sodium Oxalate, 100g

Sodium meta Silicate nanohydrate, 100g

Sodium bicarbonate, 100g

Sodium borate decahydrate, 100g

Sodium Tetraborate, 100g

Glycerol, 100ml

Potassium Cloride, 100g

Carmine reagent, 100g

Ammonium Solution, 100ml

Mercury Sulfate, 100g

Silver Nitrate, 250g

Sodium bisulphate, 100g

Sodium Acetate, 500g

Zinc metal, 100g

Aluminium Hydroxide, 500g

Zincon (2-carboxy-2'"-hydroxy-5'"-sulfoformazyl benzene), 100g

Methanol, 500ml

Phosphoric acid, 100ml

Anhydrous potassium bi-iodate, 100g

Chloroform, 500ml

Ethyl ether, 500ml

Anhyprous potassium bromide, 100g

Aluminium Nintrate, 500g

Alkylbenzene Sulfonate (LAS) solution, 100ml

Methylene Blue, 10g

Sodium phosphate, monobasic, monohydrate, 100g

N-hexane, 100ml

Petroleum ether, 100ml

M-Endo Agar, 500g

M-FC Agar, 500g

EMB Agar, 500g

MacConkey Agar, 500g

TCBS Agar, 500g

XLD Agar, 500g

Bismuth Sulphate Agar, 500g

Salmonella Shigella Agar, 500g

KF Streptococcus Agar , 500g

Mannitol Salt Agar, 500g

Lactose Lauryl Trptose broth, 500g

Ethyl Alcohol, 500ml

Rosolic Acid, 100ml

Bromocresol purple, 100ml

TTC solution, 100ml

Brilliant Green Bile Growth, 100ml

E.C Broth, 100ml

Luaryl Sulphate Broth, 100ml

Phosphiric acid 5% H3P04, 500ml

Anhydrous KBr03, 500g

Sodium arsenite (NaAs02), 500g

Urea, 500g

Antimony metal, 1g

Choromotropic acid, 100g

Devard' s alloy, 10g

Borate buffer, 500ml

Anhydrous sodium sulphate, 500g

CCl4, 500ml

Dithiozone solution, 500ml

NH4CNS, 500g

AgN03 Anhydrous, 100g

Potassium ferricyanide K3Fe(CN)6, 500g

Azomethane, 500g

Silver diethyl-dithiocarbamate AgSCSN(C2H5)2, 500g

Ammonium or postassium sulphate, 250g

2-3 Diaminonaphtheline (DAN) Solution, 500ml

Hydroxylamine sulphate, 500g

Sodium Nitroprusside, 500g

Trisodium citrate, 500g

Phosphate Buffer, 500ml

Ferroin indicator, 250ml

Fire Extinguisher 6.00 kg

Anhydrous Calcium Carbonate, 500G

Anhydrous disodium hydrogen phosphate, 500G

Borax, 500G

Bromcresol green Indicator, 5G

Carmine Stain, 25G

Chloramine T Solution 500 G

Chloroform, 2.5L

Cobalt Chloride, 500G

CRM Aluminium from NIST Al(NO3)3 in HNO3 0.5 mol/l 1000 mg/l Al 500Ml,

CRM Antimony from NIST Sb2O3 in HCl 2 mol/l 1000 mg/l Sb 500Ml,

CRM Arsenic 250ML

CRM Barium 250 ML

CRM Cadmium from NIST Cd(NO3)2 in HNO3 0,5 mol/l 1000 mg/l Cd 500Ml

CRM Copper from NIST Cu(NO3)2 in HNO3 0,5 mol/l 1000 mg/l Cu 500Ml

CRM Lead from NIST Pb(NO3)2 in HNO3 0.5 mol/l 1000 mg/l Pb 500Ml,

CRM Mercuri

CRM Molebdenum from NIST (NH4)6Mo7O24 in H2O 1000mg/I MO 100Ml

CRM Nickel from NIST SeO2 in HNO3 0,5 mol/l 1000 mg/l Se 100Ml

CRM selinium from NIST SeO2 in HNO3 0,5 mol/l 1000 mg/l Se 500Ml

CRM Silver from NIST AgNO3 in HNO3 0,5 mol/l 1000 mg/l Ag 500Ml

CRM Total Chromium from NIST Cr(NO3)3 in HNO3 0,5 mol/l 1000 mg/l Cr 500Ml,

CRM Zinc from NIST Zn(NO3)2 in HNO3 0,5 mol/l 1000 mg/l Zn 500Ml

Diatomaceous silica filter aid suspension

Dichloromethane, 2.5L

Diisopropyl ether 500ML

Dipotassium Hydrogen Phosphate, 500G

Disodium Hydrogen Phosphate, 500G

Ferric Chloride

Ferric Sulphate, 500G

Glacial acetic acid AR, 500ML

Glucose, 500G

Hexa Methylene Tetramine, 500G

Hydrazine Sulphate, 500G

Hydrochloric acid, 2.5L

Hydrofluoric Acid, 500ML

Lead Carboante, 500G

L-Glutamic Acid, 100G

M002-500G-Nutrient Broth

M043-500G-Baired -parker Agar

M052-500G-Selenite F broth

M121I-500G-Brilliant Green Agar

M189-500G-Thiosulphate- Citrate Bile Salt Sucrose Agar (TCBS)

M1991I-100G-Chromogenic coliform agar

M612-500G-Slantez and bartlety Medium

M614-500G-Buffered Peptone Water

M618-500G-Alkaline peptone water

M739-500G-Bile Salt Agar

Magnesium Chloride, 500G

Magnesium salt of EDTA, 500G

Magnesium sulphate AR, 500G

Manganous Sulphate, 500G

Mercuric sulphate, 100G

Mercury Chloride, 100G

Metacresol purple Indicator, 5G

Di-Potassium Phosphate, 500G

Tert Butyl Methyl Ether, 500ML

1-2 dibromopropane, 100G

2- Propanol, 500ML

2,4- dichlorophenylacetic acid, 25G

2,4,6- Trichlorophenol, 500G

4,4- dibromooctafluorobiphenyl, 1G

Acetone, 500ML

Acetonitrile HPLC grade, 1L

Anhydruous Sodium Carbonate

Bromodichloromethane 500ML

Bromoform AR, 250ML

Carbazole, 100G

Carbitol (Diethyl Glycol Monoethyl ether), 1L

Cupric sulphate AR, 500G

Cyclohexane AR, 500ML

Decachlorobiphenyl, 100MG

DFTPP Standards, 100MG

Diazide 25G

Dibromochloromethane

Dodecylbenzene Sulphuric Acid methyl esther

Ethanolic Sodium Hydroxide 500G

Ethyl Acetate AR, 500ML

Diethyl ether AR, 500ML

Extraction solvent (Pentane/ Hexane)

Florisil, 100G

Helium Gas carrior

Hydrochloric acid AR, 500ML

Isooctanol (2-Ethyl Hexan-1-ol), 500ML

Mercuric Chloride, 25G

Methyl Alcohol 500 ml

Tert Butyl Methyl Ether AR, 500ML

Methylene Chloride ( Dichloromethane), 500ML

Monuron, 100MG

Pentachloronitrobenzene, 25mg

Phenophthalein Indicator, 125ML

Phosphoric acid AR, 500ML

Potassioum Hydroxide AR, 500G

Potassium Phosphate AR, 500G

Silica Gel, 500G

Silicic Acid, 250G

Sodium Thiiosulphate AR, 500G

Sodium Dihydrogen Carbonate AR, 500G

Sodium hydroxide AR, 500G

Sodium Thiosulphate AR, 500G

Toulene AR, 500ML

Trimethylesilyldiazomethane 25ML

Triochloroethane, 500g

Tris HCL, 500G

Tris hydroxy methyleamino methane, 500G

Argon (Commercial Grade) 5Ltr

Ammonium Acetate Buffer, 1KG

INVENTIS TECHNOSYS PRIVATE LIMITED

LAKSHYA ENTERPRISES