Construction of Multipurpose hall (under SCDP Budget)at Freedom Fighter Pandit Susheel Rattan Govt. Degree College Jawalamukhi in Tehsil Jawalamukhi, Distt. Kangra (H.P).(SH Providing E.I therein).

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C. Makes: Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus),L&T(Entice).

Wiring for Twin Control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with 2 Way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group C. Makes: Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus),L&T(Entice).

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2X1.5Sq.mm+1X1.5Sq.mm Earth wire

Makes: Plaza/Finolex/Polycab/L&T.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2X2.5Sq.mm+1X2.5Sq.mm Earth wire

Makes: Plaza/Finolex/Polycab/L&T.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Makes: Plaza/Finolex/Polycab/L&T.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Makes: Plaza/Finolex/Polycab/L&T.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 10 sq. mm earth wire

Makes: Plaza/Finolex/Polycab/L&T.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3X1.5 Sq.mm

3X2.5Sq.mm

3X4Sq.mm

Makes: Plaza/Finolex/Polycab/L&T.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

PVC Conduit 25mm dia

Makes:-Polyplast,Deeplast

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3Nos 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.(For light plugs to be used in NR Buildings).

12 Module (200mmX150mm)

Makes:- Legrand(Myrius),L&T(Oris),Anchor Roma(Plus),L&T(Entice).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Makes: Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus)

Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Makes: Legrand(Myrius),Schiender(Livia),Anchor Roma(Plus)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 amps modular socket outlet and 25 amps modular SP MCB "C" curve including connection,painting etc. as required.

Makes: Legrand,Schiender,L&T.

Supplying and fixing extra down rod of 60cm length G.I. pipe 15mm dia heavy gauge including painting etc. as required.(Note:-More than 5cm length shall be rounded to the nearest 10cm and 5cm or less shall be ignored.) Makes: Jindal Hissar.

Makes: Anchor/Goldmedal.

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes in the cubical panel,making connections, etc. as required.

MCCB 100 Amps, 18KA

Makes:-L&T,Legrand,Scheinder.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole. Cat-A.

Makes:- Legrand,Schiender,L&T.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes:- Legrand,Schiender,L&T.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40 Amps. Cat-A.

63 Amps. Cat-A.

Makes:- Legrand,Schiender,L&T.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.(But without MCB/RCCB/Isolator).

Makes: Legrand,Schiender,L&T.

Double door-4way

Double door-12way

Double door-16 way

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 4mm dia Cu wire on surface or in recess for loop earthing as required.

Providing and fixing Copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(Vertical run)

Providing and fixing Copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, Copper tube, having single prong at top, with 85 mm dia 6 mm thick Copper base plate including holes etc complete as required.

Providing & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Makes: Makes: Plaza/Finolex/Polycab/Havells.

Armoured cable 70 sq. mm (3.5 core)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required,but excluding sand cushioning and protective covering. Makes: Plaza/Finolex/Polycab/Havells.

Armoured cable 70 sq. mm (3.5 core)

Supplying, Installation, Testing and Commissioning of cubical type, intdoor type,single door,Floor mounted, fixed type, free standing single front, dust proof & compartmentalized Main LT Panel 250Amps made out of M.S. CRC Sheet 16G& Base frame 40X40X5MM ,duly painted with Siemens Grey Powder Coated Paint as per specificationApproximate Size (H)1250MM X (W)1450 MM X (D)450MM X (L) 300mm and Assembly Charges of 250A 4 Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black and Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB/O.L.C.O.S. &MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cable and Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. and Assembly Charges of Accessories like Neoprene Gasket, Doorlocks, Copper Flexible door earth, legend plates etc.and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139 (Part I & II)(EVA or approved make).

MATERIAL:

OUTGOING :

MCCB 125A 4P 25KA TMR With O/L & S/C Protection-6 Nos.,Spreader Link MCCB 250A 4P-1Nos, MCCB 100A 4P 25kA TMR with O/L & S/C Protection-3Nos, Spreader Link, MCCB 100A 4P-3Nos.

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying, Installation, Testing and Commissioning of indoor s/door,Cubical type Sub Main LT Panel 100Amps. The Panel shall be compartmentalized type having space and arrangement for incoming and outgoing cables/bus ducting, switchgear, insulated and properly supported compartmentalized bus-bars, interconnection between bus bars and switchgear with auxiliary bus bars/insulated conductors/strips etc. It shall be fabricated in 14G/16G CRCA sheet, base frame75X40X3MM angle duly painted with Siemens Grey Powder Coated paint, Assembly Charges of 100A 4 Strip Copper Busbar ( Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.0 Amp.) Copper shall be Electric Grade E-91E, Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. Approximate Size of Panel H- 700mmX W-500mmX D-200mm. The Assembly Charges of 100 Amps 4P Copper solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB/MCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc. Assembly Charges of Accessories like Gasket, Doorlocks, Copper Flexible door earth, legend plates etc and the panel should be approved/tested from the CPRI lab and should be Comfirm I.S.64139 (Part I & II)(EVA or approved make).

MATERIAL:

All interconnections of fields side are supported by conical, L & finger type insulators of adequate size to support & sustain the weight of cables, Control wiring with copper flexible FRLS wire with thimbles, printed sleeves, tie & belt etc;

The prices of complete job as per the specifications above shall be inclusive of gasket, doorlocks, reading glass,wooden, copper flexible door earth, legend plates etc,

Supplying and fixing of Segregated tripple pole and neutral 12 ways surface/ recess mounting, 7 Segment 415 Volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, with provision to mount MCCB incomer, DP MCB/RCCB sub-incomer in each phase and SP MCBs as outgoing (but without MCB ’s and incomer), complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachable gland plate, cable interconnections, including earthing etc. as required.

Double door-12+2 way,MCCB+6+36 modules

Makes: L&T, Hagger or any other approved make.

Supplying and fixing Ding dong bell suitable for single phase, 230 volts, complete as required.

Makes: Goldmedal, Anchor.

Providing, Installation, testing and commissioning of BLDC ceiling fan with fan regulator,including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mmtwin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: (With 5 Years Warranty)

Ceiling Fan 1200 mm sweep, Category-A

Ceiling Fan 1400 mm sweep, Category-A

Make:- Usha(BLDC ),Bajaj or as approved by Engineer in-charge.

Providing and installation exhaust fan of following sizes in the existing opening,including making the hole to suit the size of the above fan, making good thedamages, connections, testing and commissioning etc. as required:(With 5 Years Warranty)

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Make:Usha(AEROCLEAN PLUS DBB ),Bajaj,Anchor or as approved by Engineer in-charge

Exhaust Fan, Heavy duty, 300 mm sweep

Make:Usha,Bajaj,Anchor or as approved by Engineer in-charge

Supplying and fixing of LED Batten along with 20Watt LED Tube Light ,6500K ,(Five YEAR WARRANTY ) and it should be compatible with specification e.i. Power Factor > .9,Harmonic Distortion<10% and efficacy >100 Lumens per watt, suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc.Makes: Havells ,Bajaj ,wipro or as approved by Engineer-in-Charge. (With 5 Years Warranty)

LED Tube Light 4Feet Long

Makes: Havells,Bajaj,wipro or as approved by Engineer-in-Charge

Providing and fixing surface/Recess mounted Round/Square downlighter with die cast Al housing in white powder coated finish, anti glare diffuser and and energy efficient electronic driver ,suitable for surface application with the use of the latest technology 18watt (1800 Lumen) 6000K and it should be compatible with specification i.e. Power Factor > 0.9, Harmonic Distortion <10% and efficacy > 100 Lumens per watt, CRI rating> 80 suitable for input voltage: AC 220-240 V, 50 Hz, complete with all accessories, connections, testing and commissioning etc. as required. (With 5 Years Warranty)

Round/Square LED Surface/Recess Panel Light 18/20 Watts

Makes: Panasonic, Bajaj, Wipro or as approved by Engineer-in-Charge.

Supplying and fixing of bulk head fitting LED 10 watt+/-1W with minimum system Lumen efficiencyof 100lm/W with and P.F.0.95 with THD,10%,CCT 5700K,CRI 70,Surge protection 4KV. The LED with useful life of 50000 Hrs. at L70. The input voltage range shall be 150V to 270V complete with all accessories, connections, testing and commissioning etc.as required. (With 5 Years Warranty)

LED 10 Watt Bulk Head

Makes: Wipro, Panasonic, Bajaj or as approved by Engineer-in-Charge

Providing and Fixing of 1X1 LED Panel 24 Watt +/- 1W Surface/Recessed mounted fixture with HET Plastic diffuser with minimum system lumen efficacy of 100 lm/W with CRCA housing having P.F.>0.95 with THD<10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700 K with CRI of minimum 80. The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. (With 5 Years Warranty)

LED Panel 1'x1' 24watt

Makes: Bajaj, Wipro & Panasonic.

Providing and Fixing of LED fixture 600mmX600mm 36 Watt +/- 1W Recess/Surface mounted fixture with HET Plastic diffuser with minimum system lumen efficacy of 100 lm/W with CRCA housing having P.F.>0.95 with THD<10% ,CRI 80.The LED with Useful life of 50000 Hrs at L70. The LEDs used in the luminaire shall have CCT of 5700 K with CRI of minimum 80. The Input voltage range shall be 150V to 270V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. (With 5 Years Warranty).

LED Surface 2X2 Luminaire-36Watts

Makes: Panasonic, Bajaj, Wipro or as approved by Engineer-in-Charge

Supplying and fixing of LED Flood light Luminaire comprises of Al Die cast Housing with frame , High Purity PC lens Diffuser,cradle mounting, minimum system lumens of 5000. The luminaire shall have CCT of 5700K and CRI of minimum 80, PF>0.95 and THD>10%. The luminaire shall have IP66 and IK08 protection. The LED shall be compliant with Useful L70 life of 50000 Hrs. Driver efficiency should be 85% to operate in input voltage range of 100V to 270V (nominal rated voltage – 240V) with 4 KV internal surge protection and 10KV external surge protection. (With 5 Years Warranty).

LED Flood Light Luminaire 50 Watts.

Makes- Wipro(Model No. LF30-651-XXX-57-XX 50 Watts)/Bajaj/Panasonic,Philips.

Supplying and fixing of Electrical Panel Rubber Insulation mat of suiitable size and thickness upto 12.5mm with chequered holes/solid sheet with insulation voltage resistance of 2Kv/sqm etc. as required complete in all respects.