Loading
Loading…
Loading…
Tender Value
₹2.9 Cr
EMD Value
₹4.3 L
Closing Date
15 May 2026, 10:00 pmClosed
Directorate of Municipal Administration
Allauddeen
Development Works in mavinakere,Azad nagar, ward no.04 in raichur city under amrut-2.0
DMA/2025-26/BD/WORK_INDENT53013/CALL-2
DMA/2025-26/BD/WORK_INDENT53013/CALL-2
Open
Buildings
Two Tender Document System(Two Cover)
DMA City Corporation Raichur
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs 572.00 Lakhs
KPWD Class 2 And Above
Satisfactorily completed (at least 50% of the Contract value), in any one year(or a continuous period of 12 months) as prime contractor, at least one similar work i.e Interception and Diversion work of value not less than Rs 143.00 Lakhs (Performance Certificate certified by Not less than the ranking of EE)
Executed in one year (for a continuous period of 12 months) the following minimum quantities of work 1.Earth work excavation /Embankment 7702 CUM 2.PCC/RCC 184.84 CUM 3.TMT Steel 7616.90 Kgs 4.HDPE /MS /DI Pipes 1491.00 Mtr 5.Road Restoration/flexible pavement/CC pavement 1617.00 SQM, Providing and constructing Machine Hole or Inspection Chamber or both-38 Nos.
Un-conditional Line of Credit/Bankers Certificatefor an amount of not less than Rs.85.80 Lakhs (Credit lines/ letters of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc). (Usually not less than 30% of the estimated cash flow) in the format as given below
Assessed available tender capacity
₹5,000
₹4.3 L
2 May 2026
2 May 2026
16 May 2026
11 May 2026
8 May 2026
Development Works in mavinakere,Azad nagar, ward no.04 in raichur city under amrut-2.0
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caut...
Supplying and filling in basement with Stone soling 40mm dia down size and filling the pores with the dust, in layers of not more than 15cm thick, well rammed, watered and consolidated etc., complete...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse agg...
Steel Reinforcement
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...
Providing, fabricating,fixing of SS Screens using SS 304 bars, with spacing as per the drawing and of 4 mm thick with handle (7.5kg) including cost of material, transportation, labour charges etc comp...
Supply, Installation, Testing and commissioning of CI Open Channel Sluice Gates, Manually operated, Rising Spindle type suitable for mounting in between two parallel walls of an Open Channel. Water se...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as requi...
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete
Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials to the appropriate disposal area stacking serviceable and unserviceable materi...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly including cost o...
Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...
Road restoration concrete Road
Road restoration Bitumen Road
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...
Operation and maintenance of Lake (5 years)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-4.docx
Tender Document • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .