Kerala

AOC

Works

Civil Works - Buildings

IMPROVEMENTS OF ANGANWADI INFRASTRUCTURE CENTER NO 55 WARD 29-General Civil Work

Local Self Government Department

PONNANI MUNCIPALITY | Malappuram, Kerala

Amount: ₹5.9 LCloses: 12 May 2025Closed

Timeline

Published30 Apr 2025
Closed12 May 2025
Awarded13 Nov 2025

Bids

Item Rate

2 Bids13 Nov 2025

#	Company	Amount	Rank	Status
1	T.V.SHAJESH L1₹5.9 LAccepted-AOC	₹5.9 L	L1	Accepted-AOC L1
2	ANPU INFRA L2₹6.1 L+₹29,267.26 (5.00%)Rejected-Finance ANPU INFRA KOTTAKKAL MALAPPURAM 676582 \| KOTTAKKAL \| MALAPPURAM \| KERALA \| 676582	₹6.1 L+₹29,267.26 (5.00%)	L2	Rejected-Finance L2

BoQ Comparative

Line Items (15)

Sl No	Description	Qty	Unit	T.V.SHAJESH L1	ANPU INFRA L2
1.00IMPROVEMENTS OF ANGANWADI INFRASTRUCTURE CENTER NO 42 WARD 41
1.00	50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	6.1	cum	6,665.3 ₹40,631.67 Lowest	6,998.57 ₹42,663.28
1.00	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	71.33	sqm	316.08 ₹22,545.35 Lowest	331.88 ₹23,672.34
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	676.29	kg	153.3 ₹1,03,675.26 Lowest	160.97 ₹1,08,862.4
1.00	OD517853/2024-2025:Providing ridges or hips 225mm flaps with 0.35mm thick G.I. sheet or nearest available size including ss screws plain washers, bitumen washers etc.complete.	23.1	metre	322.41 ₹7,447.67 Lowest	338.53 ₹7,820.04
1.00	OD517851/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required	66.42	sqm	565.5 ₹37,560.51 Lowest	593.78 ₹39,438.87
1.01	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	71.33	sqm	71.1 ₹5,071.42 Lowest	74.66 ₹5,325.35
1.01	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	71.33	sqm	152.38 ₹10,868.96 Lowest	160 ₹11,412.48
1.01	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	34.37	sqm	143.94 ₹4,947.51 Lowest	151.14 ₹5,194.98
1.01	OD517850/2024-2025:Providing and fixing 150mm square PVC rain water gutter, including fixing necessary MS clamps by welding, end cap/down take arrangements etc.	50	metre	410.11 ₹20,505.5 Lowest	430.62 ₹21,531

Tender Value

₹5.9 L

EMD Value

₹14,630

Closing Date

12 May 2025, 3:00 pmClosed

Tender Inviting Organisation

Name

ASSISTANT ENGINEER PONNANI MUNCIPALITY

Address

ASSISTANT ENGINEER PONNANI MUNCIPALITY

Work Description

IMPROVEMENTS OF ANGANWADI INFRASTRUCTURE CENTER NO 55 WARD 29-General Civil Work

Tender Information

Tender ID

2025_LSGD_762589_1

Reference Number

PNI/11/2025

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

PONNANI MUNCIPALITY

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

Required2) FORM OF TENDER (.pdf)

Required3)INTEGRITY PACT CERTIFICATE (.pdf)

Required4)PRELIMINARY AGREEMENT (.pdf)

Required1)FEE REMITANCE DETAILS (.pdf)

Required5)E - PAYMENT FORM (.pdf)

Required6)AFFIDAVIT (.pdf)

Required7)LICENCE DETAILS (.pdf)

Required8) SBD AND NIT (.pdf)

Required9) ABSTRACT (.pdf)

Required10)NIT (.pdf)

Required11BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,290

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹14,630

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

13 Nov 2025

Published

30 Apr 2025

Bid Opening

12 May 2025

Download Starts

30 Apr 2025

Download Ends

12 May 2025

Submission Starts

30 Apr 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1241459.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

T.V.SHAJESH

L1₹5.9 LAccepted-AOC

ANPU INFRA

L2₹6.1 L+₹29,267.26 (5.00%)Rejected-Finance

ANPU INFRA KOTTAKKAL MALAPPURAM 676582 | KOTTAKKAL | MALAPPURAM | KERALA | 676582

Sl No	Description	Qty	Unit	T.V.SHAJESH L1	ANPU INFRA L2
1.00IMPROVEMENTS OF ANGANWADI INFRASTRUCTURE CENTER NO 42 WARD 41
1.00	50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	6.1	cum	6,665.3 ₹40,631.67 Lowest	6,998.57 ₹42,663.28
1.00	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	71.33	sqm	316.08 ₹22,545.35 Lowest	331.88 ₹23,672.34
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	676.29	kg	153.3 ₹1,03,675.26 Lowest	160.97 ₹1,08,862.4
1.00	OD517853/2024-2025:Providing ridges or hips 225mm flaps with 0.35mm thick G.I. sheet or nearest available size including ss screws plain washers, bitumen washers etc.complete.	23.1	metre	322.41 ₹7,447.67 Lowest	338.53 ₹7,820.04
1.00	OD517851/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required	66.42	sqm	565.5 ₹37,560.51 Lowest	593.78 ₹39,438.87
1.01	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	71.33	sqm	71.1 ₹5,071.42 Lowest	74.66 ₹5,325.35
1.01	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	71.33	sqm	152.38 ₹10,868.96 Lowest	160 ₹11,412.48
1.01	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	34.37	sqm	143.94 ₹4,947.51 Lowest	151.14 ₹5,194.98
1.01	OD517850/2024-2025:Providing and fixing 150mm square PVC rain water gutter, including fixing necessary MS clamps by welding, end cap/down take arrangements etc.	50	metre	410.11 ₹20,505.5 Lowest	430.62 ₹21,531

Sl No

Description

Qty

Unit

T.V.SHAJESH

ANPU INFRA

1.00IMPROVEMENTS OF ANGANWADI INFRASTRUCTURE CENTER NO 42 WARD 41

1.00

50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

6.1

cum

6,665.3

₹40,631.67

Lowest

6,998.57

₹42,663.28

1.00

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

71.33

sqm

316.08

₹22,545.35

Lowest

331.88

₹23,672.34

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

676.29

153.3

₹1,03,675.26

Lowest

160.97

₹1,08,862.4

1.00

OD517853/2024-2025:Providing ridges or hips 225mm flaps with 0.35mm thick G.I. sheet or nearest available size including ss screws plain washers, bitumen washers etc.complete.

23.1

metre

322.41

₹7,447.67

Lowest

338.53

₹7,820.04

1.00

OD517851/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required

66.42

sqm

565.5

₹37,560.51

Lowest

593.78

₹39,438.87

1.01

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

71.33

sqm

71.1

₹5,071.42

Lowest

74.66

₹5,325.35

1.01

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

71.33

sqm

152.38

₹10,868.96

Lowest

160

₹11,412.48

1.01

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

34.37

sqm

143.94

₹4,947.51

Lowest

151.14

₹5,194.98

1.01

OD517850/2024-2025:Providing and fixing 150mm square PVC rain water gutter, including fixing necessary MS clamps by welding, end cap/down take arrangements etc.

metre

410.11

₹20,505.5

Lowest

430.62

₹21,531