GENERAL

Supply and fixing of M.S structure steel i.e., angles, channels & I sections and its fabrication charges etc., complete - 1 Kg. (comprising: Trusses, 50mm Sq Pipes Purline, Cladding pipes, Bolts & Nuts for Trusses/Purline Pipe Joints, and Gates)

Roofing with corrugated G.I sheets 0.50mm thick fixed with G.I 'J' bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters, trusses & cost of conveyance of all Material - 10 Sq.M. (BLD-CSTN-8-1)

Earthwork excavation in Ordinary soil by Mechanical Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(B)) - 1 Cum - For Drain

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance of all materials and all labour charges ramming, watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH - For Drain

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. (PCC Bed) - For Floor @ Inside and For Drain

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. - For Drain

Masonary works in CM (1:6) Propostion with fly ash Cement Solid blocks of size 290X225X140mm for Manufacturing of Fly ash Solid blocks using fly ash of 80 kgs, Cement of 15kgs, gyspum of 5kgs and stone dust including cost and conveyance of all Materials and labour charges, scaffoldidng and curing charges etc.. complete with a Compressive streanth of not less than 50kg/Sqm for walls. (Above Plinth - Long & Short walls)

Plastering in C.M (1:3) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2) - above Plinth

Flooring with Polished Bethamcherla stone minimum 25 mm thick (0.254M x 0.254M) over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges, cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) - For Floor @ Inside

Painting to the walls with 2 coats of Acrylic emulsion paint of exterior Grade having VOC (Volatile Organic Compound) content less than 50 Grams per liter of approved brand and shade including one coat of cement primer after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for External Walls. (Three Coats) - for New Walls

Painting with Synthetic Enamel paint TWO Coats of approved quality colour & graded-I over a primary coat of read oxide paint of grade-II to New steel works after the surface are thoroughly cleaned & scrapped including primary coat item of work, cost & conveyance of all Material, Labour charges etc. as per S.S & as directed by the departmental authorities for finished item of work - 10 Sq.M. (Total Three Coats) - New steel works (Trusses 50mm & 100mm dia) & Gates

Supply and fixing 4 Way TPN Distribution board with IP-43 protection (Metal Door) suitable for 3 phase 63 A FP Isolator as incomer and 12 Nos 6-32 A 10kA SP MCBs as outing goings including internal connection and labour charges for flush mounting and complete. Makes : L&T/Exora /Siemens/ GE / ABB /Standard / Havells / HPL / Indo Asian / Toyoma - for New Shed

Wiring with 2 runs of 14/0.3mm (1.00 Sq.mm) PVC insulated F.R flexible copper cable (ISI Mark) make of Havells/KEI/Polycab/Bonton/Gold Medal/V-Guard/GM Million/HPL/Finecab/Orbit in the existing pipe with 6-A/10-A 1 way 1 module switch make of Legrand Arteor/Schneider Zencelo/ Honeywell/Blenge plus, Ceiling rose of make Anchore/Gold Medal Olive/Million Zoom and 8 modular horizontal/vertical cover frame of make Legrand Myrius/Cabtree Thames platinum/GM Four Five/Mullion Logus/Gold Medal Curve/CPL/Panasonic vision/Salzer S.90,Series covering to module box including all labour charges etc., complete for LIGHT POINTS, FAN POINTS & BELL POINTS in Residental Building. - for New Shed

Supplying and Run of U/S Circuit Mains by mean run of 2 of 36/0.3mm (2.5 Sqmm) FRLS/HFFR/ ZHFR pvc insulated 1100V grade as per IS.694/190 specification for Copper Wire make Havells/KEI/Polycab/GM/Gold Medal/Million/HPL/Fine Cab/Vimal/Orbit in the existing metalic/Non metalic conduit pipe for run of mains including all labour charges etc,complete for mains - for New Shed

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt, PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG - for New Shed

Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 32W, air delivery 210/220 cubic meter/min with remote and without Regulator. Makes : Atomberg(Gorilla GV2)/ Halonix(Plasma) /Havells(Efficiencia) (ELEC-5.1.1) - for New Shed

Supply of 2 Module Modular type Electronic step type Fan Regulator (n) for Ceiling Fan including cost and conveyance of all materials to work site and all labour charges etc.,complete. - for New Shed

Supply and fixing of 16-A/6A 1 way combi Socket with shutter make of Legrand Arteor/Schneider Zenelo/celo/Honeywell Blenge Plus duly recessed in module box including cost and conveyance of all materials to work site and all labour charges etc.,complete. - for New Shed

Provision for Seignorage charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item