Development of Park

Painting to new walls with two coats plastic emulsion paint of approved brand after thoroughly brushing surface to remove dirt and remains of loose powdered materials including cost and conveyance of materials to work and all oprational, incidental,labour charges for finished item of work as per SS 911 for external walls unit 10.00 sqm

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles

Under-reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with Augoring and boring equipment in site as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters for single under reamed bulbs

Supply and placing of the design mix concrete corresponding to IS -456 using WEIGH BATCHER/MIXER using 20 mm size graded machine crushed hard granite metal (coarse agggregate) from approved quarry including cost and conveyance of all materials like cement,fine aggregate(sand),coarse aggregate ,water etc to site and including seigniorage charges ,sales and other taxes on all materials including all operational ,incidental and labour charges such as weigh batching ,machine mixing ,laying concrete ,curing etc complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO 402) with minimum cement content as per IS Code from standard suppliers approved by the deparment including pumping ,centering,shuttering,laying concrete ,vibrating,curing etc M20 design mix

Piles and Bulbs

Plinth Beams :-

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) BLD-CSTN-2-18

Manufacture,supply,delivery of MS grill gates,window ornamental safety grill ,made with MS flats,MS angles,MS squares etc including welding,finishing,applying red oxide paint as primary coat etc complete unit

Plastering with CM (1:5) 12mm thick

Painting to new walls with two coats plastic emulsion paint of approved brand shade after thoroughly brushing surface to remove dirt & remains of loose powerderd materials including cost and conveyance of materials to work site & all operational, incidental, labour charges etc complete for finshined item of work as per SS 911 for External walls with primary coat of cement primer

Painting with Synthetic Enamel paints - Two Coats -for MS grills

Painting with Synthetic Enamel paints - Two Coats - For Old Iron Work

Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template. Makes: Bajaj / Valmont / TRANSRAIL / SKIPPER / LAASMA MAT-03931

Foundation and Erection charges for 7.50 Mts long Octagonal pole on bridge kerb portion with 4 Nos, 8" Anchor bolts with chemical treatment with suitable "J" type bolts etc duly drilling holes to RCC slab with V.C.C. M.15 concrete for suitable base concreting with necessary steel reinforcement work and curing for 7 days etc. including cost and conveyance of all material and all labour charges etc.complete as directed by the department officers MAT-03960

Supply and Transportation of 20 W LED Post top lantern made with cast Aluminum with decorative opal polycarbonate diffuser with IP 65 protection etc., complete with all accessories with not less than two years warranty. Makes: As per list of recommended brands.

Supply and fixing of suitable feeder pillar boxes made with 14 SWG CRCA sheet including S &F of Legrand /Schnieder /Seimens /ABB /L&T MAKE 63A TP MCB, 8 nos of SP MCBs ,bus bars ,6 sqmm 3 core copper cable for individual light control, contracts,suitable timer and connectors and provision for energy meter etc for finished item of work

Supply and transportation of outer dia 50 mm and inner dia 38mm double walled corrugated HDPE duct made as per specification BSEN-500 86/IS 14930 part-II makes DURA LINE(Dura Guard) or its equivalent

Supply of 16 Sqmm 4 Core.XLPE insulated 1100 V grade armoured alluminium cable as per specification cinfirming to IS 7098 (part-1) of makes Torrent/ universal / CCI / Unicab

Supply of 25 Sqmm 3.5 Core.XLPE insulated 1100 V grade armoured alluminium cable as per specification cinfirming to IS 7098 (part-1) of makes Torrent/ universal / CCI / Unicab

Supply of PVC insulated 2 core 2.5 sqmm sheathed flexible copper cable for voltage upto 1100V as per IS 694/1991 specification for copper cable of make Finolex /RR Kable /KEI

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for foundations of upto 3.00m depth.

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH for foundations

Plain cement concrete (1:4:8) using 40mm m/c SS5 HBG including machine mixing, laying, compacting, finishing, curing etc for foundations

Providing concrete for plain/reinforced concrete in open foundations using of 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.Nominal mix 1:2:4

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply of 50 Sqmm 4 Core.XLPE insulated 1100 V grade armoured alluminium cable as per specification cinfirming to IS 7098 (part-1) of makes Torrent/ universal / CCI / Unicab unit Rmt

Supply of 140/0.3mm (10 Sqmm) FRLS / HFFR / ZHFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable. Makes: Finolex / RR kabel / APAR E-beam 1.5.3)

S& F 40 mm Nominal Bore GI pipe medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete from main to pillar box and from pillar box to pole

Supply, delivery and fixing of 3.30mt dia 2" inch GI pipe Consisting 22 no of Nozzeles with Regular Intervels fixing to the existing pump sets including all necessary fittings and RGB Lighting Arrangments etc., complete as directed by the departmental in charge of the work

Providing supply delivery and fixing mosaic tiles including all labour charges etc., complete as directed by the departmental in cahrge of the work'

Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH for foundations sand filling

Supply, Delivery and Commissioning of wide slide Height of 1.5 Mtr Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Slide Chute :- Wave slide chute made from best quality FRP (Fibre Reinforced Plastic) with thickness of 5mm in attractive colours.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Arch Swing 3.0 Mtr x 1.25 Mtr x 2.6 Mtr.(L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Four Seater Swing 2.0Mtr x 1.25 Mtr x 2.1 Mtr.(L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Sea Saw 2.4 Mtr X 0.5 Mtr x 0.5 Mtr (L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Sea Saw Seat :- Seats are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Four Seater MGR(Animal) Dia.1.5 Mtr Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.MGR Seat :- Seats are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- Bearings are used are of “6209” and “30206” of reputed make. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Multi Sea Saw 2.4 Mtr X 0.5 Mtr x 0.5 Mtr (L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coating to the thickness of 80-120 microns. Powder and Primer should be of Ackzonobel make.Sea Saw Seat :- Seats are made from best quality F.R.P. material with thickness of 5mm in attractive colours. Bearing :- The bearings used are “6202” permanent lubricated sealed bearing of repute brand. Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work

Supply, Delivery and Commissioning of Flying Butterfly 2.0Mtr x 1.25 Mtr x 2.1 Mtr.(L x W x H) Metal:- All pipes make should be Tata or Jindal. All pipes should be of "medium grade" as per IS1239 are galvanized and zinc dipped. Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process is dressed of removing all sharp edges and burrs. All metal parts should be coated using primer for GI up to 40 microns follwed by powder coati ng to the thickness of 80-120 icrons. Powder and Primer should be Bearings are mounted in specially designed M.S. bush.Safety & Maintenance:-All products of equipment should be tested as per EN1176 safety norms and ce certification must. Maintanance should be followed as per EN 1176 guidelines. The equipment should be withstand for the weight of user more than 100Kg.Hardwares :- All Nuts, Bolts,Washers should be of high tensile galvanised material. Including all excavation and Concrete work. Including all excavation and Concrete work

Supply, fabrication, erection, installation, and painting of one complete FRP four-faced penguin doll structure or any other similar structure including pedestal and outer fencing (approx. 8 ft total height with three penguins on hexagonal colorful fountain pedestal, surrounded by mild steel railing fence) with Penguins constructed from fibre-reinforced unsaturated polyester resin (IS 6746 Grade-I) with E-glass mat (450 GSM, 6-8 layers, 4-5 mm thick), 0.5 mm gel coat veil, GI pipe (25 mm) internal skeleton (galvanized IS 277); pedestal (4 ft H x 4 ft dia, 300 kg) in 150 mm thick M20 RCC (1:1.5:3 mix with 10 mm agg., Fe 415 steel 8 mm bars @150 mm c/c both ways bottom, 6 mm stirrups, formwork, 7-day curing) overlaid with 5 mm FRP laminate and multi-color PU paint (red/yellow/blue/green), integral 20 mm PVC fountain pipe including single phase Mono Block Motor ; outer fencing (10 ft x 10 ft enclosure, 3 ft high) using 32 mm GI pipe verticals @600 mm c/c, 40x40x4 mm horizontal rails (3 nos.), M10 GI bolts/welds, synthetic green enamel finish (IS 2932); including mould making/reuse, trimming, 4-coat painting, quality tests (wind load 120 km/h per IS 875 Part 3, no delamination), transport (500 km), site leveling (100 mm PCC 1:3:6 bed), pedestal casting/anchoring (12 nos. M12 holdfasts), penguin bolt fixing (8 nos. M10), fountain commissioning, fence gate (3 ft wide), and measured per complete single decorative unit with pedestal and fencing supplied, installed, and painted operational etc., complete as directed by the departmental in charge of the work.