PROVISION OF MS GRILL ACCESS CONTROL DOOR TO TERRACE AND MACHINERY ROOM IN CERTAIN MARRIED ACCOMMODATION BUILDING AND OTHER SANCTIONED WORK UNDER AT SMA RAMESWARAM UNDER GE FORT KOCHI

Amount

Excavation in post holes each n exc 0.05 cum and getting out in loose/ soft soil, returning, filling in and ramming earth in layers n exc 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specified & directed.

M&L PCC (1:4:8) type D-2 (using 40mm graded aggregate) as in foundation filling and mass concrete etc all as specified & directed.

M&L for cement concrete 1:3:6, type C2 using 40mm graded stone aggregate as in foundations, filling, post holes and mass concrete

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirmed to grade Fe 290 grade E-165, all as specified & directed.

M&L Steel work in tubular trusses including posts,purlins,and rafters special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified & directed by Engnr-in-Charge

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of andcolour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws complete all as specified & directed by Engnr-in-Charge

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for prepartion of new steel surfaces of any description,over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete as specified and directed upto any height, complete all as specified & directed by Engnr-in-Charge

S&F of Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges with thickness 0f 1.25mm and 250mm diameter, fixed with flat iron clamp of size 30mm width and 5mm thick and provide necessary welding as required, complete all as specified & directed by Engnr-in-Charge

S&f 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, complete all as specified & directed by Engnr-in-Charge

S&f 110mm bore PVC (SWR) bends any radius, complete all as specified & directed by Engnr-in-Charge

M&L providing precast cement concrete solid building blocks masonry 1:3:6 Type C1 (using 20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) in walls set in cement mortar 1:6 , complete all as specified & directed by Engnr-in-Charge.

M&L 15mm thick rendering cement plaster in cm (1:4) with WPC and making surface even and smooth without using extra cement all as specified and directed note- WPC Paid Seperately, complete all as specified & directed by Engnr-in-Charge

Supply only Liquid water proofing compound, complete all as specified & directed by Engnr-in-Charge

M&L 10mm thick rendering cement plaster in cm (1:6) and making surface even and smooth without using extra cement all as specified and directed, complete all as specified & directed by Engnr-in-Charge

M & L for preparing newly plastered surfaces of wall ,priming plasterd and other surfaces with alkali resistant priming paint and two coat of cement based paint complete as specified and directed upto any height, complete all as specified & directed by Engnr-in-Charge

M & L for preparing newly plastered surfaces of wall (interior) and three coat of white washing complete as specified and directed upto any height, complete all as specified & directed by Engnr-in-Charge

S&F for framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified & directed by Engnr-in-Charge

S&F Butt hinges 125mm , heavy weight, cold rolled and mild steel and fixed, complete all as specified & directed by Engnr-in-Charge

S&F Bands, straps, supports or staysfor rainwater, ventilating pipes,including bolts, ifrequired:hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks forhanging fans; plain angle cleatsfor securing purlins to woodtrusses or rafters; knee piece inserts two way and three way straps, plate washers and similar small articles conforming toFe-290 Gde-E-165, complete all as specified & directed by Engnr-in-Charge

S&F 1mm thickness mild steel, plain, black sheet in covering to door shutters; covering to doorchowkats (frames);chullah hoods; watertanks; water troughs;ducts; urinal troughsand funnels, etc. cut tosize edges beaded ifdirected,holes punched;including round headedscrews, clout nails orrivets and fixed to woodor steel members, etc.,with plain 40 mm lapjoints or welded/riveted seams including bending, turning up,mitred angles, stoppedends, outlets, etc.if sheeting is welded to frame as required, complete all as specified & directed by Engnr-in-Charge

Surface dressing n exc. 15 cm deep in Soft and loose soil, complete all as specified & directed by Engnr-in-Charge

M&L for Hard core of broken stone gauge n exc 63mm, deposited, spread and levelled in layers nexc 15cm thick, watered and rammed to a true surface complete all as specified and directed

M&L PCC 1:4:8 type D-2(40mm graded stone agg) as in sub base 100mm thick, finished even rough complete all as specified & directed by Engnr-in-Charge

M&L for 50mm thick cushion of course aggregate of 6.3mm and below size complete all as specified and directed by Engineer in Charge.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment, laid to the pattern, complete all as specified and directed by Engineer in Charge.

M&L for providing cement conrete type B-1(1:2:4) using 20 mm graded aggregate as in coping, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, including form work under as directed by Engineer in Charge.

Excavating in post holes (or similar holes) in soft & loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm as directed by Engineer in Charge.

Removing of excavated material/broken RCC pipe etc excedding 100 m and depositing where directed at a level not exec 1.5 m above the ground level.

S&F for angle iron fencing posts including cutting tops to shape as directed, drilling holes, notching for wire, etc., (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting, flat iron for fixing of chaint link fencing etc. , and similar work conforming to Fe 290 (grade- E-165), complete all as specified and directed by Engineer in Charge.

Supply only chain link MS galvanised fencing any size or type all as specified and as directed by Engnr-in-Charge Note : Unit weight per square meter will be measured by Board of Officer

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails, straining bolts, etc including provn of binding wire, complete all as specified and directed by Engineer in Charge.

M&L for mild steel framed work such as grills, gratings, door frames, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including bending and welding as required, steel conforming to Fe.290.Gde-E-165 complete all as specified and directed

M & L for mild steel as in pintle hinges ,stops, hand-made sliding bolts,, handles, sliding bolts, and small MS articles etc.complete all as specified and directed

S&F for MS Round bars 10 mm dia and over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-W (Gde.E-250) quality-A, complete all as specified and directed by Engineer in Charge.

S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the others, or screwed both ends, each screwed end to be fited with washers and one hexagonal or square nut of dia 5 to 10 mm and length of bolt exc 5 cm and n exc 10 cm long, complete all as specified and directed by Engineer in Charge.

S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the others, or screwed both ends, each screwed end to be fited with washers and one hexagonal or square nut of dia 11 to 15 mm and length of bolt exc 5 cm and n exc 10 cm long, complete all as specified and directed by Engineer in Charge.

SF of 4 mm dia Plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured), complete all as specified and directed by Engineer in Charge.

N AND N ENGINEERING

REIGN CONSTRUCTIONS

T K BUILDERS

Anaswara Constructions

Super Constructions