Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.2 Cr
EMD Value
₹2.5 L
Closing Date
7 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
RBL PBH
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Similar nature for this work is. "CTR/TRR/TFR/TTR including Raising of track , screening, distressing of track maintaenance machine like tamping machines/ ballast screening/regulating machines & TTR by T-28." is for technical experience/competence of advertised work in terms of Pr. Chief Engineer Circular No. 610 (Revised-3). As per the HQ/NDLS letter No. 74- W/0/Pt.XXV/Similar Nature of Works/WA dated 22-01-2020.
22 conditions · 9 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Miscellaneous track Maintenance work in the section of SSE/P.Way/RBL under ADEN-RBL.
22-SrDEN-II-LKO2026-2027~NR
22-SrDEN-II-LKO2026-2027
Open
Works - General
6 Months
Lucknow, Uttar Pradesh
₹0
₹2.5 L
11 Nov 2026
11 Nov 2026
23 Nov 2026
79 items across 11 schedules · ₹1,24,07,490.6 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| positioning of rails accurately on cess supporting rails, providing required squaring at ends for renewal as directed by Engineer in-charge. | — | — | — | — | |
| 1 | long rail panel | RM | 300.00 | 10.51 | 3,153 |
| and removing rail of all section & track, laid on any type & density of removing fish plates, fastenings & other materials including stacking materials within an average 500 metres as directed by Engineer Note: 1.Cutting of rails shall be paid 2.Work to be done under traffic | — | — | — | — | |
| 2 | Rail Renewal work | RM | 300.00 | 40.73 | 12,219 |
| rails of all types & length in track, type & density of sleeper to the gauge under traffic block. Rates fastening of rail with sleepers with of fastenings and fixing of fish bolts or, if required, providing gap for stacking of released material infringement within 250m as directed Engineer-in-Charge. Note: Rail drilling and paid separately. | — | — | — | — | |
| 3 | Rail Renewal work | RM | 300.00 | 43.13 | 12,939 |
| of any type of sleepers in track sleepers lying on cess or at Bridge for casual renewal at isolated all fittings complete to specified cross level with contractor's tools packing and dressing of ballast, as Engineer in-charge. Released shall be neatly stacked and handed location within an average lead or near either side of Bridge as directed. | — | — | — | — | |
| 4 | other than Ballasted Deck Bridge | Each | 150.00 | 544.17 | 81,625.5 |
| 5 | replacement of Grooved Rubber Sole on PSC sleepers duly removing the liners and replacing the GRSP by just rail after cleaning the rail seat, liner and ERC after greasing of and Liner contact area including Contractor's Grease Graphite Grade duly cleaning of rust/scale of ERC, liners & SGCI insert by using wire scrapper/sand emery paper etc., with all labour, tools, plants including stacking of released materials at locations within SSE Jurisdiction and by Engineer-in-Charge. Note: GRSP at SSE/stores/depot. | Sleeper | 50000.00 | 24.29 | 12,14,500 |
| 6 | of ERCs and its liner contact area by ERCs and Metal / GFN liners in rail of rust / scale of ERC, Metal / & SGCI insert by using wire brush, sand emery paper etc supply and of graphite grease, as prescribed by under side of liners & corresponding foot & SGCI insert with ERCs and re- same as per procedure prescribed in of IRPWM with contractors grease tools & plants complete and as Note: Each ERC in this item shall ERC and its Liner Contact area. | ERC | 200000.00 | 4.55 | 9,10,000 |
| of Plate/Rail screws of Points and SEJs, Bridges, Curves etc., with graphite, including removal of screws without damaging sleepers, cleaning brush etc., both screws and dowel grease graphite, refixing the sealing the top and sides of screw graphite to prevent ingress of corrosion with contractors labour, consumables under traffic condition all complete. | — | — | — | — | |
| 7 | Contractor's Grease Graphite | Each | 10000.00 | 37.95 | 3,79,500 |
| 8 | seized Plate/Rail screws on PSC using gas or any approved drilling holes in broken screw and existing screw pieces from the holes existing dowels and fixing new dowels (procured from RDSO sources) and grouting around dowel materials of approved specification new Railway's rail/Plate screws duly screw with specified grease with all materials, consumables, tools & with all lead, lift. Note: 1.Seized be identified and marked by verified at minimum SSE/P.Way In 2. Due care shall be taken to damage to the sleeper 3.A penalty of basic cost of new sleeper in nearest factory shall be levied on each, if damaged in the process. | Each | 1000.00 | 158.79 | 1,58,790 |
| 9 | existing SEJ with improved SEJ with under traffic block conditions as drawing including fixing of special plate, rubber pad and other sleeper greasing to the fittings, leading & fittings to site, leading and released materials within a lead of of Rails, drilling of holes, fixing of providing temporary connection till welding of SEJ is done and be given initial packing to make 20KMPH speed. Note: (1) Rail cutting drilling shall be paid separately. (2) comprise complete SEJ on both rails at | Set | 10.00 | 9,657.84 | 96,578.4 |
| Schedule total | ₹28,69,304.9 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
22-Sr.DEN-II-LKO-2026-27_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .