Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹26.8 Cr
EMD Value
₹27 L
Closing Date
2 Jan 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Neeravari Nigam Limited
Sri Deepak Kamble
Survey, Investigation, Design, Supply, Installation, Testing and Commissioning of Lift Irrigation System (Head Works consisting of construction of Intake well with connecting pipe, Jack well cum pump house, Vertical Turbine Pumps coupled to Motors, Pump house Electrical works, Necessary valves, Delivery Pipe, Manifold system electrical panel, soft starter, capacitors, 11 KV power transformer, 11/0.433 KV sub-station, 11 KV power line and 11 KV Terminal bay, Rising Main, Pressure Distribution, Gravity Distribution, Stand Pipe) for Filling up of 6 Nos MI / ZP tanks by lifting water from Krishna River Near Ganeshwadi Village of Kagwad Taluk including Operation and Maintenance for a period of 5 years after successful completion of work for KAGWAD TANK FILLING SCHEME- STAGE-II on Turn-Key Basis
KNNL/2024-25/OW/WORK_INDENT1624/CALL-2
KNNL/2024-25/OW/WORK_INDENT1624/CALL-2
Open
Other Works
Two Tender Document System(Two Cover)
KNNL Division HBC Div Athani
22 documents required · 22 mandatory
A valid copy of the KPWD Class I and Above with validity.
GST Regestration certificate/ Pan Card.
Valid Employees Provident Fund Registration Certificate with EPF paid challan for the month previous to the month in which tender is called through KPPP- portal.
The tenderer should complete the provisions of the contract labour (Regulation and Abolition Act 1970) and the corresponding Karnataka Rules 1974).
Work Done : To qualify for award of this contract each tender in his or her in the last 5 years (2019-20 to 2023-24) should have satisfactorily completed (at least 90% of the contract value of on going works) as prime contractor at least one similar nature of work of value not less than Rs. 13.38 Crores. (usually not less than 50% of the amount put to tender under this contract.) Work done certificate issued by an officer not below the rank of EE of the concerned division and countersigned by the SE of the concerned circle is to be uploaded for the technical bid. The cost of completed works of the previous year shall be given a weightage of 10% per year to bring it to the price level of financial year in which tenders are invited. Certificates should be obtained from the Officer not below the rank of Executive Engineer. Note Similar nature of work means Bidder should done the work in ne lift irrigation scheme/tank filling scheme
The intending bidder (Individual) should executed in any one year the following minimum quantities of work during the last 5 years i.e 2019-20 to 2023-24. The necessary work done certificate issued by an officer not below the rank of EE and countersigned by the SE of the same circle should be uploaded Earthwork Excavation 44,300 Cum, Reinforced Cement Concrete (M-15 Grade and above) 2,500 Cum, Reinforcement steel bars for RCC works 300 MT
Latest copy of the Income Tax return for financial year 2023-24(Assesment year 2024-25).
financial turnover : The intending bidder should have achieved a minimum financial turnover of Rs 53.52 Crores in at least two financial years during the last 5 years reckoned back from 2023-24 (turnover during 2019-20 to 2023-2024 only will be considered) duly updating the financial turnover at 10% per year to bring it to the price level of financial year in which the tenders are invited. Audited profit and loss statement (with year wise turnover statement) certified by a practicing Chartered Accountant with mentioned compulsory UID number along with copy of Income Tax returns filed for the two years indicated above shall be furnished. (If UID Number not mentioned treated as incomplete and rejected)
Liquid Assets Liquid Assets and or availability of cridet facilities of not less than Rs 6.69 Crores Credit lines/ letters of credit / certificate from banks) for meeting the fund requirements etc., (usavaly the equivalent of the estimated cash flow for 3 months in peak construction period)
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity ( AXNX1.5- B ) where A Maximum value of civil engineering works executed in any one year during the last five years(2019-20 to 2023-24) (updated to 2024-25 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value, at 2023-24 price level, of existing commitments and on-going works to be completed during the next 0.50 years (period of completion of the works for which Tenders are invited) If the participates in more than one bid and technically qualified subsequently becomes lowest in more number of bids tha his/her bid capacity, then the tenderer can give his option to select the works based on his/her preference equivalent to his bid capacity. Further for the balance bids next lowest bidders will be eligible to accept at lowest bidders rates equivalent to their bid capacity provided if the competent authority accepts it Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
Scanned signature of the bidder along with phone number / authorised representative in case of a firm or company, to be attached while uploading the bid documents. Also in case of authorised representative, scanned copy of power of attorney should be uploaded & the original should be produced at the time of opening of tender.
Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5 % of the Contract price. Additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract
Each tenderer in his or her in the last 5 years (2019-20 to 2023-24) should have satisfactorily Executed in any one year the following minimum quantities of work The intending Bidder (Individual)/Tie-up partner should have supplied and successfully commissioned at least 1 numbers of VT pumps with a capacity (flow rate) not less than 0.1 cumecs for each pump with a head not less than 100 m for each pump during the last 5 years (i.e., from 2019-20 to 2023-24). The necessary work done certificate issued by an officer not below the rank of EE and countersigned by the SE of the same circle should be uploaded
The intending bidder (Individual) should have supplied, erected, tested, completed and commissioned MS pipes not less than 406.4 mm Outer diameter for a length of at least 8 kms in any one year during last 5 years (i.e., from 2019-20 to 2023-24). The work done certificate should be obtained from a competent authority not below the rank of EE of the concerned division and countersigned by the SE of the concerned circle
The intending bidder (Individual) should have supplied, erected, tested, completed and commissioned HDPE pipes not less than 200 mm Outer diameter for a length of at least 19 kms in any one year during last 5 years (i.e., from 2019-20 to 2023-24). The work done certificate should be obtained from a competent authority not below the rank of EE of the concerned division and countersigned by the SE of the concerned circle
The Bidder/Tie up partner shall not be under Corporate Debt Restructuring (CDR) / Strategic Debt Restructuring (SDR) or Bureau of Industrial and Financial Reconstruction (BIFR) in the last 5 Years prior to bid submission date. In this regard, the Bidder shall submit along with Bid, a certificate from their Statutory Auditor with a declaration that, the Bidder is not under CDR / SDR or BIFR
For construction of Transmission line/Substation Works, the contractor shall engage only those agencies who are licensed to do the power line construction works in Karnataka. They should have constructed at least one similar single power line equal to 80% of the length (4 Km) of 11 kV SC line of power line for the work tendered in a single contract. The details of the transmission line construction contractor with registration certificate and certificates of experience signed by an officer of not below the rank of Executive Engineer of KPTCL shall be submitted for KNNLs verification post award of the work
The bid shall be technically evaluated based on the specifications indicated in Section-3 titled Qualification information in bid document
The Bidder/Tie up partner shall not be under Corporate Debt Restructuring (CDR) / Strategic Debt Restructuring (SDR) or Bureau of Industrial and Financial Reconstruction (BIFR) in the last 5 Years prior to bid submission date. In this regard, the Bidder shall submit along with Bid, a certificate from their Statutory Auditor with a declaration that, the Bidder is not under CDR / SDR or BIFR
Bids not satisfying minimum duty point parameters, efficiency parameters of pumps and motors and velocity parameters as specified in bid document shall be rejected
During technical evaluation, if the employer finds that any certificates / information furnished is false, such bidders will be disqualified and barred from participation in the bid
If any bidder fails to satisfy the conditions mentioned above, such bids will be rejected and their financial bids will not be opened.
The bidder should enclose the detailed methodology of execution of the scheme as per the scope of work
The Bidder shall be responsible for successful performance of the contract.
For construction of Transmission line/Substation Works, the contractor shall engage only those agencies who are licensed to do the power line construction works in Karnataka. They should have constructed at least one similar single power line equal to 80% of the length (4 Km) of 11 kV SC line of power line for the work tendered in a single contract. The details of the transmission line construction contractor with registration certificate and certificates of experience signed by an officer of not below the rank of Executive Engineer of KPTCL shall be submitted for KNNLs verification post award of the work
The Bidder to participate in the tender under single bid basis only. Any violation will attract disqualification of the bid
The pump manufacturer shall not enter into Tie-up with more than one bidder.
The contractor/authorized signatory should attach his/her scanned signature to the Schedule-B before uploading and also submitting their tenders
The work of the construction of transmission line should be got done through a Government Licensed, Super Grade Electrical contractor CEIG approved, who have the experience of carrying out such works
The diameters of the rising main and thickness of the rising main shall not be less than the figures indicated in the enclosed schematic diagram. Further any discrepancies in the above shall not account to financial implications to the employer.
If any of the dates mentioned above happen to be a general holiday, the next working day holds good.
Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever
Any modifications/addendum for the above said tender will be published in KNNL website www.knnlindia.com & in KPPP portal www.kppp.karnataka.gov.in No separate advertisement will be published in News paper/ITJ. The intending bidder shall visit the said website regularly
The intending bidders should note that, if any of lands either in part /parts or in whole required for the work is not acquired by the Nigam, it shall be the responsibility of the bidder to take possession of such land and start the work by consent of the land owners before commencement of work at no extra cost to the Nigam and no claim / delays whatsoever relating to on account of non availability of land would be entertained
They should abide by the directions of Government towards recovery of 1% (or as modification by Government from time to time) cess from the contractors bill under the provision of building and construction work welfare cess act-1996
The intending bidder shall upload self attested letter pad mentioning latest communication address, land phone & mobile Phone & e-mail address
1% of labour cess as per provision of building and the construction works welfare Act 1996 will be recovered from each running bill of the contractor
The work proposed as per the scope of work is off-taking from Krishna River near Ganeshwadi village of Kagwad taluk & Belagavi district. If any additions/alteration involved for during execution, it is the responsibility of the agency to deliver the goods as per contemplated scope of the work without causing any damages to existing infrastructure. If any damages occur during execution, the same shall be restored to the original condition at no extra cost
The intending bidder/firm/company are advised to visit the work site before submission of the tenders
The contractor should mention their recent correct portal address & mail address in declaration forms
The tender processing charges paid by the bidder/firm/company are not refundable even if the tender is cancelled
All materials like steel, cement, MS pipe etc., required for successful completion of the above work should be procured by the contractor only. No supply of any materials shall be made by KNNL
The bidder/firm/company shall send the authorization letter for their representation duly attesting their signature
Operation & Maintenance period/Defect liability period for this work is 60 months from the date of completion of work. The contractor shall take the responsibility of 5 years O&M including 2 years defect liability period from the date of issue of certificate by the competent authority for successful commissioning of the project
Useful rubble and stone chips obtained from excavation shall be issued to the contractor for use on works (including enabling works and aggregate crushing) at the rates specified for these materials in the prevailing Schedule of Rates.
The bidder/firm/company shall adhere to accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also land acquisition problems if any
Typographical errors if any will not be the ground for any claims by the bidder/firm/company
The contractor shall also abide by the other conditions as laid down in Bid document.As per GO FD 5 EXP -12 / 2023 dated 15.05.2023, the contractor shall be abide to provide e Bank Guarantee towards Security Deposits
Debarment of tenderers: The procurement entity may debar tenderer for a period not exceeding 3 years from participation in its tenders following such procedures as may be prescribed on the ground that tenderer is engaged in corrupt or fraudulent practices in competing or executing the contract including misleading the procuring entity or any stage of procurement activity with a fraudulent intention. (KTPP Act 26A)
The intending bidders are advised to visit the site of work before submitting their tenders
Joint Venture tenders not allowed.
₹7,500
₹27 L
2 Oct 2026
2 Dec 2024
6 Jan 2025
16 Dec 2024
18 Dec 2024
Part - A Civil Works
Part A Civil Works Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposa...
Clearing and grubbing land including uprooting rank vegetable grass, bushes, shrubs, saplings and trees upto 300mm girth by manual means, in areas of light jungle, removal of stumps, disposal of unser...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Earth work excavation for pipeline trenches by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barric...
Ordinary.soft rock .without requiring blasting. Depth exceeding 1.5 m, but not exceeding 3.0 m
Earth work excavation for pipeline trenches by mechanical means above 600 mm trench width as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of...
Hard rock .requiring blasting. Depth exceeding 1.5 m, but not exceeding 3 m
Hard rock .blasting prohibited. Depth upto 1.5 m
Hard rock .blasting prohibited. Depth exceeding 1.5 m, but not exceeding 3 m
Excavation in hard rock of all toughness including boulders above 0.6m dia. . 0.113 cum . by approved controlled blasting methods forfoundations of canal cross drainage and other appurtenant structure...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded . submerged arc welded mild steel .Fe.410 grade. raising main pipe of specifie...
398.4 mm ID, 4.00 mm thick MS Pipe
315 mm ID, 11.00 mm thick MS Pipe
150.0 mm ID, 5.00 mm thick MS Pipe
200.0 mm ID, 5.00 mm thick MS Pipe
Providing and applying pipe coating of fibres, coal tar and solvent based rubber modified bituminous primer of density 0.92 gms.cu cm and viscosity of 1000.2000 cps . 150 gms.sqm followed by seven lay...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984.2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
HDPE Grade PE 100.PN 3, 280 mm dia
HDPE Grade PE 100.PN 3, 200 mm dia
HDPE Grade PE 100.PN 4, 200 mm dia
HDPE Grade PE 100.PN 4, 280 mm dia
HDPE Grade PE 100.PN 4, 315 mm dia
HDPE Grade PE 100.PN 3, 315 mm dia
HDPE Grade PE 100.PN 4, 355 mm dia
Manufacturing, providing, transporting, rolling, lowering, laying, jointing . testing and commissioning of MS specials of minimum 8mm thick such as bends, tail pieces, reduces etc. conforming to IS.73...
Refilling available earth around trenches.pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary .demarcation . chainage. arrow stones including cost of all materials,labour, engraving marks, excavating pit, fixing in position, muru...
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC.8.1980, fixing in position including painting and printing etc. .ii. Ordinary Km stone .precast.
Providing casing embankment using semi.pervious soil available from excavation in layers of 250 to 300 mm . before compaction .including cost of all materials, machinery, labour, all other operations ...
Providing Murrum bedding for the pipe line trenches in block cotton and rock reaches including watering and consolidationby punners etc. complete with all lead and all lifts.
Installation of product pipe by manual jacking method . Manufacturing, providing, transporting, rolling, lowering, laying . jointing, testing, commissioning of ERW .Electric Resistance Welded., SAW .S...
Jacking of 900 mm dia . 10mm thick M.S. Casing Pipe.
Earth work excavation for Foundation by mechanical means for all works . depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works . depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Depth 1.5 m to 3.0 m
Depth exceeding 12.0 m, but not exceeding 13.5 m
Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including stting out, shoring, strutting, barricading, caution lights, including...
In Hard Rock . requiring blasting. Depth upto 1.50m
2 Depth exceeding 1.5 m, but not exceeding 3 m
Depth exceeding 4.5m, but not exceeding 6m
Depth exceeding 6.0 m, but not exceeding 7.5m
Depth exceeding 13.5m, but not exceeding 15.0m
Depth exceeding 15.0m, but not exceeding 16.5m
Depth exceeding 16.50m, but not exceeding 18.00m
Depth exceeding 18.0m, but not exceeding 19.50m
Depth exceeding 19.5m, but not exceeding 21.0m
Depth exceeding 21.0m, but not exceeding 22.5m
Depth exceeding 22.5m, but not exceeding 24.0m
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works . other parallel works from 0.50m to 3.5...
Floor and Roof beams
M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates
M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 to 5m
For Piers and abutments 0 to 5m
beyond 10 m upto 15 m
beyond 15 m upto 20 m
beyond 20 m upto 25 m
beyond 25 m upto 30 m
For Beams and Lintels 0 to 5m
For Beams and Lintels M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates 0 to 5m
beyond 10 m upto 15 m
beyond 10 m upto 15 m
Supplying, fitting and placing TMT FE 550 . 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping.welding joints, tyin...
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. One coats on old work as per specifications and as per directions of Engineer in charge.
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Filling available excavated earth .excluding rock. in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and constructing 300mm thick dry rubble stone pitching with pin headers at 2 per sqm including cost of all materials, labour, hand packing, finishing etc., complete with all lead and lifts.
Providing and constructing size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 set in CM 1.5 proportion by volume with pointing joints in CM 1.3 proportion by volume inclu...
Design, fabrication, supply, erection, testing and commissioning of adequate capacity screw type hoist consisting of supporting structure, platfom, railing, ladder with all accessories for operating c...
Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of panels of suitable height with vertical trash bars welded to structural steel frame at wider interval a...
Design, fabrication, supply, erection, testing and commissioning of sliding type stoplog gate consisting of skin plate, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, stif...
Supply and fixing of Single . Double chamber triple function tamper proof .Both the orifces to be housed in the single chamber. Air valves with Body and cover in Ductile cast iron of grade GGG 40.50. ...
For TP Air Valves of 80mm dia Valve PN10.0
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron .DI. conforming to IS. 1865 and of grade GGG 40.50, shaft of stainless steel, wedge...
100 mm diameter Scour valve with accessories.PN.10
For Sluice Valve of PN 16.0 and 200mm
For Sluice Valve of PN 16.0 and 150mm
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1.4 .1 cement . 4 coarse sand. inc...
Providing 20 mm cement plaster with cement mortar 1.3 .1 cement. 3 coarse sand. finished with a floating coat of neat cement to brick.stone masonry including rounding off corners wherever required smo...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber . neoprene gasket etc. complete as per the architectural drawings and the directions of...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and constructing protective railing consisting of cast in.situ railing posts of size 150 x 150 mm at bottom, 100 x 100 mm at top and 750 mm height, placed approximately at 2 m centre to cent...
Finishing walls with water proofing cement paint of required shade .New work .Two coats applied . 4.84 kg.10 m2. to give an even shade after thoroughly brooming the surface to remove all dirt, dust, m...
Finishing walls with 100. Premium acrylic emulsion paint having VOC less than 50 gm.litre and UV resistance as per IS 15489.2004, Alkali . fungal resistance, dirt resistance exterior paint of required...
Construction of Granular Sub.Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Wet Mix Macadam .Plant mix method.Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical m...
Bituminous Concrete Grading II for traffic .20 MSA Providing and laying Bituminous Concrete with 40.60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminou...
Providing and laying Semi Dense Bituminous Concrete with 40.60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG.30 . 5. by weight ...
Providing and laying Dense Graded Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG.30, . 4.0 per cent...
Providing and fixing Steel work welded in built up sections. framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete. Fixed to steel w...
Providing and laying vitrified floor tiles in different sizes .thickness to be specified by the manufacturer. with water absorption less than 0.08. and conforming to IS. 15622, of approved make, in al...
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS . 15622 .thickness to be specified by the manufacturer . of approved make in all colours, shades except burgundy, bottle gr...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1.3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Interior Painting. Wall painting with premium acrylic emulsion paint of interior grade, having VOC .Volatile Organic Compound . content less than 50 grams. litre of approved brand and manufacture, inc...
Providing and laying in.situ vibrated M.15 . 28 days cube compressive strength not less than 15 N . sq mm. grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain co...
Construction of sub.grade and earthen shoulders with approved material obtained from borrow pits with all lifts . leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Granular Sub.Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per m2 using mecha...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg.m2 on the prepared bituminous surface cleaned with mechanical broomTack coat on...
Construction of Embankment by excavating the available approved Gravel.Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching. cement concrete blo...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG . above 1100 CMF . above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Borewell depth of 50 to 100 m
Providing and fixing of retro. reflectorised cautionary, mandatory and informatory sign as per IRC.67.2012 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270.2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 .part. II. 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm .minimum...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034.2000.3Phase, SS Bowl . Impeller with Low volt Motor as per specifications,as per ne...
Supply and delivery at site GM .copper alloy. gate valves confirming to Class.I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Providing GM .copper alloy. reflex valves. globe valves confirming to Class.I and as per IS 778.1990 with latest amendments, 1 No. and with ISI mark screwed female ends confirming to IS 554. 1990 hori...
Providing, Laying and Fixing GI pipes conforming to IS 1239.1990 with latest amendments complete with GI fittings .excluding the cost of fittings. with cuts and threads wherever necessary, including t...
Providing wrought mild steel .galvanized. 15 mm dia GI collar confirming to IS 1239.II, 1991 with latest amendments if any. For 50 mm dia GI collar.
Supply and delivery at site wrought middle steel .galvanized. GI bend confirming to IS 1239.II, 1991 with latest amendments if any. For 50 mm dia GI BEND
Supply and delivery at site wrought middle steel .galvanized. GI tee confirming to IS 1239.II, 1991 with latest amendments if any. For 50 mm dia GI TEE
Supply and delivery at site wrought middle steel .galvanized. GI union confirming to IS 1239.II, 1991 with latest amendments if any. For 50 mm dia GI Union
Supply and delivery at site wrought middle steel .galvanized. GI plugs confirming to IS 1239.II, 1991 with latest amendments if any. For 50 mm dia GI Plugs
Supply and delivery at site wrought middle steel .galvanized. GI back nut. check nut confirming to IS 1239.II, 1991 with latest amendments if any.For 50 mm dia GI Black nut
Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...
Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately
Supplying S.S RCC SPUN . VIBRATED CAST PIPES .REINFORCED. pipes NP.3 Class conforming to IS.458.1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
RCC NP3 Class pipe of 1000 mm dia.
KSRRB M800.11.1.Painting lines, dashes, arrows etc.,on Roads in two coats on New Work..Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conformi...
Supply and fixing of DI Double flanged wafer type . Concentric. . double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 . IS 13095 with shaft shall be of stainless steel A...
For Butterfly Valve of PN 10.0 and 300mm
For Butterfly Valve of PN 10.0 and 200mm
Providing hearting . casing embankment using homogeneous approved soil from borrow areas in layers of 250 to 300 mm . before compaction. including cost of all materials, machinery, labour, all other o...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix .1.3 .1 cement. 3 fine sand. to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
150 mm dia .Float Valve
M.S.Fabricated Self Acting Air Cushion Valves with D.I.soft seated Isolating GateValve, FLANGES DRILL TO IS.1538 of specified diameter with all fixtures including cost of all materials, machinery, lab...
Supplying, fixing and commissioning of stainless steel 304 orifice plate specified diameter with all fixtures including cost of all materials, machinery, labour etc., including associated MS Stub and...
Providing and installation of Class SN8 Double Wall Corrugated HDPE Specials outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and...
200 ID TEE . fitting for 200mm dia pipes
110 mm PE 100 PN 3
Earth work excavation for Foundation by Mechanical means depth upto 1.50m,as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including...
Providing Size Stone masonry with hard stone in foundation . plinth with Cement mortar 1.6 .1 cement . 6 coarse sand.
Ceiling plastering . Providing 12 mm cement plaster with cement mortar 1.4 .1 cement. 4 fine sand. to brick masonry including rounding off corners wherever required smooth rendering, providing and rem...
Outside plastering . Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1.5 .1 cement . 5 coarse sand. finished with a top layer 6 mm thick cement pl...
Door.Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves .excluding cost of cement concrete an...
Doors . Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...
Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...
Doors .SOLID PVC DOOR FRAME Providing . fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners . jointed ...
Doors. Providing . fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top . bottom rails, covered with heat mou...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite.trap.basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
1000 mm dai pipe
Finishing with Epoxy paint .two coats. at all locations prepared and applied as per manufacturer.s specifications including appropriatepriming coat, preparation of surface, etc. complete. On steel wor...
Providing and injecting chemical emulsion for Pre.constructional Anti.Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excav...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite.trap.basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Cement Concrete for all Foundation works. The granite.trap.basalt crushed graded coarse aggregates and fine aggregates as per relevant I Codes machine mixed with super...
Demolishing brick work manually. by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer.in....
Demolishing R.C.C. work manually. by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer.in.charge.
Water supply and sanitary charges ..5. of total civil cost.
Electrical charges ..5. of total civil cost.
Operation and Maintenance of the Scheme for 5 years.
Detailed Engineering consisting of detailed designs and working drawings for Jack well cum pump house, Rising main, distribution network, structures, design of electrical works, .0.1 . of the estimate...
Part B. Electromechanical Works
Part B. Electromechanical Works Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS. 1710 having spec...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
250mm diameter for class 300 . Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel . Fe.410 grad...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel .Fe.410 grade. manifold pipe system of specif...
Diameter of manifold pipe 600 mm Thickness of plate.8mm . Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted en...
Supplying Installing testing and commissioning electrode actuated water level transmitter of approved make with all accessories to protect against dry running of pump.
Supplying laying and connecting LT Power cables of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated, extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules a. From ...
Supplying laying and connecting LT Power cables of 1.1 KV Class Armoured Aluminium / copper conductor PVC insulated, extruded inner sheathed,galvanised,steel strip with glands/lugs/ferrules b. From T...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130.1984 and .Virgin. PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130.1984 and .Virgin. PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130.1984 and .Virgin. PVC insulation sheathed suitable for working ...
Supplying and drawing Copper control Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130.1984 and .Virgin. PVC insulation sheathed suitable for working ...
Grounding of equipments including cost of 40mm dia 2.5 mm thickness, class .C. G.I pipe of 3 metre length as per specifications, with 50x6 mm GI Flats 3 meter long, salt charcoal, including excavation...
Supply, install and concrete GI Flat 50 mm x 6 mm from earth stations to various electrical panels motors etc.,
Providing and fixing of Single/ Double chamber triple function tamper proof .Both the orifces to be housed in the single chamber. Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Design, fabrication, supply, assembling, testing and commissioning of Main LT Panel made of sheet metal duly painted with recess for cable entries at bottom suitable for 415V equipped with circuit bre...
Market Rate for 310 HP .2 W .1S. . Providing and fixing of DI Double flanged wafer type .Concentric. / double eccentrically disc, Resilent seated Butterfly valves conforming to BS EN 593 / IS 13095 wi...
Providing erecting and commissioning MS Dismantling joint as per requirement and department.s approved drawing and specifications, inculding machining and rubber rings and suitable for 25 kg/cm2 worki...
Supplying,fixing and commissioning of Pressure Relief Valve of approved make body and seat ring of bronze PN 25 class conforming to IS.14845 of specified diameter with all fixtures including cost of a...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before con...
Supplying heavy gauge PVC Conduit Pipe 25mm Dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cemen...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS.8130.1984 and .Virgin. PVC insulation sheathed suitable for work...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS.8130.1984 and .Virgin. PVC insulation sheathed suitable for work...
Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 .Phase . Neutral. . 1x1.0 mm2 .Earth wire. FRLS multi stran...
Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 .Phase . Neutral. . 1x1.0 mm2 .Earth wire. FRLS multi stran...
Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm .Phase . Neutral. . 1x1.0 sqmm .Earth wire. FRLS multi str...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and .C. Type curve, indicator ON/OFF, energy cross.3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and .C. Type curve, indicator ON/OFF, energy cross.3 with Short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB.s single phase ...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12. Sweep .300mm.
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Supply of round/square recess/surface mounted rollingtype LED Down light with 10.12W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector . has sw...
Supplying and fixing of slim patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired. Excluding Ballast . Flouresent Tube.1 x 4. Tube light fitting.
Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. Electronic stepped regulator.
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS.374. 1979 and with double ba...
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and .S. hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...
Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fittin...
Fabricating supplying and mounting MS box made out 18SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Supplying 4mm thick plastic sheet with necessary nitchesfor fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.
Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Electrical Double Pole Structure complete including 5 Kg, 8 SWG GI Wire for Structure Grounding
Lightning Arrestor . 10 kV, 5 kA Polymeric Type with Ground disconnector.
11 kV, 5 KN Polymeric Pin Insulator .24 mm Long FRP Rod.
Isolators. . a. 11 kV, 400 Amps Double Break GOS
b. H . Frame Set for fixing 11 kV, 200 Amps Single Break GOS . .For DP structure for providing New GOS for sectionalisation. . MS
11 kV, DOLO Cutout Conventional to Erstwhile KEB Specification
Metering Cubicle equipment details a. 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT . 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem . 2 No...
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS.7098 .Part.2. Armouring wires dia and Resistivity as per IS.3975 a. 240 Sqmm, .55 GI Wires . 3.15 mm ...
b. 11 kV, Jointing . Cable Termination Kit
Heat Shrinkable outdoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm
c. Aluminium End Terminal .Lug. 240 Sqmm
Conventional RMU .VCB Type. with Copper Busbar, 350 MVA, 630 Amps as per IEC.62271/IS.3427 One Breaker .OD. Panel with Copper Busbar
11kV 45kN Polymeric Insulator
Guy Set Complete with No. 15 strain insulator
RABBIT ACSR Conductor
Coyote conductor for inter connecting of the 11KV equipment.s
PG Clamps for Rabbit Conductor
Spiral Earth Electrode
EG Stirrups with GI wire lacing
Guy concreting with Boulders, Mud and Sand
Caution/Danger Board
Anti Climbing Device .12 mtr GI Barbed Wire. Lump sum
a. Testing . Commissioning For first 11 kV Panel Outdoor type/Kiosk
Annunciator, Panel for 1 Feeders
Copper Control Cables, Power cables . Cable Trays a..2C X 1.5 Sqmm
b..2C X 2.5 Sq. mm
c..10C x 2.5 Sq.mm
d..10C x 4 Sq.mm
ii..Supplying . Laying cable trays including welding fixing of supports a. Cable tray of 300 mm width .Suitable for cable duct of D type.
b. Cable tray of 600 mm width .Suitable for cable duct of D type.
Erection of Transformers Moving the Transformer to the plinth. Maximum allowable distance is 50 metre .More than 50 metre, approval of D.T. has to be obtained.
Grounding mat and equipment earthing at Receiving End side a. Supplying and laying of MS flats, of various sizes, welding and applying ACB paint to welded portion and covering with sodium bentonite c...
b. Providing 25mm dia M.S.rod 1.05 Mtr. Long earthmat spikes including heating, bending top 50mm over lap flattening and making spike edge at one end driving into the earth below the ground level and ...
c. Grounding of equipment with various sizes, G.I. Flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes a...
d. Grounding of equipments by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metres long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron ...
e. Supplying . Providing 450 mm dia 450 mm height 1.5. to 2. thick hume pipe collar .non pressure type. for earth pits including all lead and lifts etc.,
Spreading of Jelly. Supplying and spreading 100mm thick with 20/25mm jelly with all lead and lifts.Note . Only 20/25 mm jelly shall be used..
Fire Fighting Equipments with necessary mounting Stands. a. Foam type extinguisher 9.0 Litre Capacity
b. Carbon dioxide type 4.5 kg. capacity
c. Dry Chemical powder type 4.5 kg Capacity
d. Sand type i. G.I.Bucket 9 Ltr.capacity
ii. Steel stand
Station Yard chain link fencing a. Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/...
b. Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the dir...
Station Yard Lighting a. RCC Pole . 9 Mtr Long, 145 Kg WL as per IS.785
b. PSCC Pole . 9 Mtr Long, 200 kg WL
c. 11kV, Horizontal cross arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole . 9 Mtr Long, 145 kg WL
d. 11kV, Horizontal cross arm with clamps, HTST supports, bolts, nuts and washers for PSCC pole . 9 Mtr Long, 200 kg WL
e.Cross arms, clamps etc.,
c.Supply of galvanized Bolts . Nuts
Clamps . Connectors a. C . Type Wedge Connectors .Fired. Coyote to Coyote ACSR .
Insulators . Hardware.s . a. Terminal Clamps for COYOTE Conductor
b. 70KN Disc insulators
b. Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130.1984 and .Virgin. PVC insulation sheathed suitable for w...
c. Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded po...
d. Supplying and Fixing of 32mm dia class A GI pipe bracket up to 2 Mtrs long bent at suitable angle and fixing to this bracket 1x40/2x40 watts fluorescent tube street light fitting of all capacities ...
Maintenance Tools and Plant i..Ring spanner 12 nos. per set
ii..Pipe wrench 24 inches size
iii..Pipe wrench 18 inches size
iv..Double end spanner. 12 nos. per set
v..Hack saw frame B185
vi..Rubber hand gloves 15 kV tested
vii..Rechargeable 5 W LED Hand Torch
viii..Insulated cutting plier 12 inch size
ix..Insulated cutting plier 8 inch size
x..Line live tester AC/ DC 500 V
xi..screw driver 18 ..
xii..screw driver 12 ..
xiii..Hammer 8 lbs
xiv..Hammer 2 lbs
Distribution Transformer .Supply of 800 kVA Copper wound Distribution Transformer 11kV/0.433KV with on Load Tap Switch, Buchholtz relay winding temperature indicator, Stacked CRGO core with oil temp...
for 800 kVA Earth work excavation for Foundation by mechanical means for all works . depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1.6.12 .1 cement . 6 coarse sand . 12 graded stone aggregate 20 mm nominal size. up...
Providing Coursed rubble masonry .first sort. with hard stone in foundation and plinth with Cement mortar 1.6 .1 cement . 6 coarse sand.
Providing Flush/ Ruled pointing. Pointing on stone work with cement mortar 1.3 .1 cement . 3 fine sand. after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Filling available excavated earth .excluding rock. in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing 20 mm cement plaster with cement mortar 1.3 .1 cement. 3 coarse sand. finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required sm...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
dtp.doc
Tender Document • 19.34 MB
Kagwad TFS_Vol-III Drawings.pdf
Design Document • 15.76 MB
CIRCULAR.pdf
Others - CIRCULAR • 0.78 MB
Notification Call-2 Tank filling Final.doc
Instructions to Tenderers • 0.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .