REPAIR MAINT OF B R NATURE FOR SUB STN AND EM INSTALLATION AT ELECTRIC SUB DIV UNDER GE UTILITY AMBALA CANTT

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GE UTILITY AMBALA CANTT

NAME OF WORK : Repair / Maint of B/R nature for sub stn & EM installation at electric sub div under GE (U) Ambala cantt.

Contract No: GE (U)/AMB/68/2026-27

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Material & labour for 15mm bore fancy type, chromium plated, angle cock/ stop cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange including taking down existing of any type complete all as specified & directed. 2 Each Excess(+) Full Conversion INR

2 Material & labour for vitreous china squatting pan of orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area including taking down existing of any type complete all as specified & directed. 2 Each Excess(+) Full Conversion INR

3 Material & labour for vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position including taking down existing of any type complete all as specified & directed. 1 Each Excess(+) Full Conversion INR

4 Material & labour for Vitreous China urinals, bowl type (back or corner wall type), size of 465 x 355 x 265 mm white (minimum) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Vitreous China bowl urinal flat back,, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) including taking down existing of any type complete all as specified and directed. 2 Each Excess(+) Full Conversion INR

5 Material & labour for PVC valveless, syphonic action type, flushing cistern,10ltr capacity low level, white, with inlet, ball valve, float and handle including bracketse with PVC bend/Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and making all connection including taking down existing of any type complete all as specified and directed. 3 Each Excess(+) Full Conversion INR

6 Material & labour for 15mm bore for fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed including taking down existing of any type complete all as specified and directed. 2 Each Excess(+) Full Conversion INR

7 Material & labour for 3 mm thick sheet glass, selected quality and glazing wooden bead in square/ reacanguler not exc 0.5 Sq m each in panes, including hacking out old mounted glass, fixed with aluminium angled frame or fixing arrangements as regd at site complete all as specified and directed. 5 Square Metre 0.0000 Excess(+) Full Conversion INR

8 Material & labour for repair of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC bldg Board or commercial plywood, fixed with aluminium angled frame and two CP MS hanging arrangements complete all as specified and directed. 2 Each Excess(+) Full Conversion INR

9 Material & labour for Mild steel work as in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 or E-165 including dismantling of existing post complete all as specified and directed. Note :- Work Executed over existing boundary wall necessary fastners if required including in quoted rate. 1500 Kilogram Excess(+) Full Conversion INR

10 Material & labour for concertina coil 600 mm dia (approx 50 turns per coil) in stretch position hot dip galvanised steel wire coated with CLR anti corrosive paint making diamond shape with the help of dove tail clip 18 SWG fixed over barbed wire barbed wire with angle iron, the concertina coil is to be fixed with the barbed wire at point wherever coil touch the bottom of barbed wire with the help of hog rings 14SWG complete all as specified and directed. Note - Hoggong shall be fixed at a interval of 600mm C/C wherever it touched with barbed wire shall be 300mm it shall be deemed to included in quoted rate. 300 Kilogram Excess(+) Full Conversion INR

11 Material & labour for galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. and taking down of existing complete all as specified and directed. 5 100 Running Metre Excess(+) Full Conversion INR

12 Material & labour for Steel water tubing of 15 mm bore, medium grade galvanized, ISI marked with all fittings laids in floor with wall and on ceiling including taking down existing complete all as specified and directed. 8 Running Metre Excess(+) Full Conversion INR

13 Material & labour for Steel water tubing of 20 mm bore, medium grade galvanized, ISI marked with all fittings laids in floor with wall including taking down existing complete all as specified and directed . 10 Running Metre Excess(+) Full Conversion INR

14 Material & Labour for PVC water storage tank 500 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, 15mm Ball valves, high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of of any description complete all as specified and directed. 2 Each Excess(+) Full Conversion INR

15 Material & Labour for PVC water storage tank 1000 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, 20mm Ball valves, high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of of any description complete all as specified and directed. 1 Each 0.0000 Excess(+) Full Conversion INR

16 Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as specified and directed. 720 Square Metre Excess(+) Full Conversion INR

17 Material & labour for Ready Mix Plaster on brick work or concrete surfaces in finished having ready mix cement plaster with high quality polymer additives, well graded sand and fillers for manual plastering application on Over Head water tank even and smooth without using extra cement complete all as specified and directed. Make:- Asian paint, Ultra tech, Berger 200 Square Metre Excess(+) Full Conversion INR

18 Material & labour for 10 mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified. Note :- Plaster shall be done using yamuna sand/ black sand. 70 Square Metre Excess(+) Full Conversion INR

19 Material & labour for rough cast plaster incl 15 mm thick CM 1:3 on brick work or concrete surface complete all as specified in SSR Part -1 clause 14.22 complete all as specified . Note:Rough cast plaster finish shall be as follow :- After applying the under coat cement mortar 1:3 and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggreagte ( Which is generally of size between 6 to 12 mm depanding on the texture required mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even . The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure the larger aggregate are throughly covered. Note : Area to be plastered may require to be carried out up to height of 15 m, necessary scaffolding required shall deemed to be included in rate quoted against this item. 450 Square Metre Excess(+) Full Conversion INR

20 Material and labour for brick work with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radius including demolition of existing masonary of any type complete all as specified and directed. 40 Cubic Metre Excess(+) Full Conversion INR

21 Material & labour for mild steel framed work as in ornamental gates/ cattel trap or other section with gusset plates, rails, braces, grills, pintal etc. complete drilled for fixing steel sheeting or other covering to be prepare for hanging including either hooks or hinges etc. including taking down of existing complete all as specified and directed. conforming to Fe-290 (Gde E-165), and dismantling of old unsv gates /door complete all as specified and directed. 2000 Kilogram Excess(+) Full Conversion INR

22 Material & labour for repair of Stainless steel wire cloth, 0.36mm nominal dia of wire and averae width of aperture 1.40mm and fixed with with stainless steel wire staples complete all as specified and directed. 5 Square Metre Excess(+) Full Conversion INR

23 Material & labour for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws or using J hook where as required including dismantling of any type complete all as specified and directed. 180 Square Metre 0.0000 Excess(+) Full Conversion INR

24 Material & labour for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws including dismantling of any type complete all as specified and directed. 10 Square Metre Excess(+) Full Conversion INR

25 Material & labour for repair of Steel rolling shutters 1.25mm, with ball bearing, as specified including top cover, anchoring rod, pipe shaft, Hood cover 1.25 mm thick, curtain, hold fast stopper, square bar guide channel, bracket plate, lock plate, handle, sliding lock, pulling hook, hasp and staple and one shop coat of primer; erected in position as directed by Eng- In- charge, including dismantling of existing push pull or manual type complete all as specified and directed. 6 Square Metre Excess(+) Full Conversion INR

26 Dismantling brick tiles single layer on roofs complete all as specified and directed. 100 Square Metre Excess(+) Full Conversion INR

27 Demolition of mud in roof any thickness including plaster & leaping whether full thickness removed or part thereof complete all as specified and directed. 10 Cubic Metre Excess(+) Full Conversion INR

28 Material & labour for PCC M-15, nominal mix, type B-0 (1:2:4), using 12.5mm graded crushed stone aggregate as in PCC padding on roof etc., and the like rounded or chamfered on edges including necessary form work, complete all as specified and directed. 3 Cubic Metre Excess(+) Full Conversion INR

29 Material and labour for PCC 1:2:4 type B0 using 12.5 mm graded mechanically crushed stone aggregate as in roof kerbs (gola) complete all as specified and directed. 1 Cubic Metre Excess(+) Full Conversion INR

30 Material & labour for Water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of cleaning of concrete surface or plaster surface of roof and applying evenly a bitumen primer conforming to IS 3488@ 0.30Kg per sqm followed APP modified polymeric water proofing membrane minimum weight 3.6kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) as per manufacturer's instruction and including taking the APP membrane will be required where the parapet wall exceed 45cm for carrying over and taking into parapet walls, cut out neatly a horizontal groove 6.5 cm deep, 7.5 cm wide section with lower edge at not less than 15 cm above the graded roof surface and groove shall be finished smooth with cement mortar 1:4, where the parapet wall height is 45cm or less no grove will be required as the water proofing treatment will be carried over the top of parapet wall complete all as specified and directed. 100 Square Metre 0.0000 Excess(+) Full Conversion INR

31 Material and labour for 40mm thick brick tiles laid and bedded in cement mortar 1:6, 15mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% or crude oil by weight of cement complete all as specified and as directed. 75 Square Metre Excess(+) Full Conversion INR

32 All as per Ser item No 31.00 here in before but except tiles. Note:- Old serviceable tiles obtained from Srl item No 26.00 here in before shall be used. 25 Square Metre Excess(+) Full Conversion INR

32.01 Note for Ser item No. 28.00 to 32.00:- (i) Scaffolding required for execution of work at site shall be provided by the contractor and cost for the same shall be included in the quoted unit rates and nothing extra shall be admissible to the contractor on this account. (ii) The contractor shall submit the written performance guarantee of treatment for 05 years from the date of physical completion of work. (iii) 5% amount of the total amount of treatment shall be retained as a guarantee and shall be released after 05 years. However contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost of the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect. Excess(+) Full Conversion INR

33 Uprooting scrubs/plant/flora & fauna on wall girth not exceeding 100mm from brick wall by cutting holes into masonry/walls for digging out roots and dosing Sulfuric/Phenolic Acid as per manufacturer's instruction to burn deep rooted tree roots and making good the disturbed area with cement mortar in CM 1:3 using water proofing compound including necessary scaffolding upto a height of 20 metre complete all as specified and directed.” Note :- (i) Scaffolding incl quoted rate. (ii) Plastered paid separetely. (iii) Brickwork required qty shall be paid separetely. (iv) Any type of tree on walls and on roof including peepal tree. 40 Each Excess(+) Full Conversion INR

34 Repair/Rescuing, easing and adjusting wooden door shutter of any description without taking off shutter from the frame, area of shutter exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, including making good the disturbed area as per existing, complete all as specified and directed. 10 Each Leaf Excess(+) Full Conversion INR

35 Preparation of newly steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed. 12 Square Metre Excess(+) Full Conversion INR

36 Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed. 300 Square Metre Excess(+) Full Conversion INR

37 Material & labour for Non-skid joint free coloured glazed ceramic coloured printed tiles 10 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, as in floor set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match colour of tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed. 100 Square Metre Excess(+) Full Conversion INR

38 Material & labour for glazed ceramic coloured printed tiles of size 450 x 300X 10mm in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement motor 1:3 all as specified and as directed. 100 Square Metre 0.0000 Excess(+) Full Conversion INR

39 Material and labour for Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular), tiles, area of each tile exceeding 0.36 sqm but not exceeding 0.72 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. 100 Square Metre Excess(+) Full Conversion INR

40 Demolition of Unreinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 32 Cubic Metre Excess(+) Full Conversion INR

41 Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. 25 Cubic Metre Excess(+) Full Conversion INR

42 Material & labour for 75 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement complete all as specified and directed. 500 Square Metre Excess(+) Full Conversion INR

43 Material & labour for 60mm thick (M-35 grade concrete) machine pressed precast concrete interlocking paver block of approved design and shape confirming to IS 15658-2006 with a crushing strength not less than 250 kg/sqmm with grey cement and pigment laid over 25mm thick sand cushning complete all as specified and directed. Note : Sand cushning will be measured and paid seperately. 500 Square Metre Excess(+) Full Conversion INR

44 Material & labour for sand cushioning layer of 25mm thick under interlocking tiles complete all as specified and directed. 11 Cubic Metre Excess(+) Full Conversion INR

45 Material & labour for Providing cement concrete on edges Type B1 1:2:4 using 20 mm graded aggregate as in roof kerbs or mud stops,rounded or chamfered on edges complete all as specified and directed. 2 Cubic Metre Excess(+) Full Conversion INR

46 Material & labour for Machine cut Kota stone slab flooring not less than 18 to 20 mm thick (size of stone shall not less than 55cm x 55cm), laid over & including 15mm thick screed base in CM 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding to yield finish with machine including demolition of existing complete all as specified and directed. 80 Square Metre 0.0000 Excess(+) Full Conversion INR

47 Material & labour for 18-20 mm thick black granite stone slab on walls, pillars and as table top of any type with table rubbed and polished, set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including demolition of existing complete all as specified and directed. 25 Square Metre Excess(+) Full Conversion INR

48 Material & labour for dressing of ground by cutting / removing vegetation, scrapping, clearing of all grass, shrubs, bushes, weeds, trees and saplings not exceeding 30cm in girth (measured at a height of 1m above the ground level) on either side of building or low laying area, aprons and other places in alpha power house area by deploying jungle jims (06 feet) with tractors, and level the ground as per natural ground slope operators including fuel, lubricant, etc. complete all as specified and directed. 2000 Square Metre Excess(+) Full Conversion INR

49 Surface Excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. 500 Square Metre Excess(+) Full Conversion INR

50 Removing excavated material (soils) exc. 50 m and depositing where directed at a level not exc. 1.5 m above starting point complete all as specified and directed. 50 Cubic Metre Excess(+) Full Conversion INR

51 Material & labour for complete removal of existing treatment internal as well as external or ceiling and soffits of Over Head Tank and installation of GE utility by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed. 2093 Square Metre Excess(+) Full Conversion INR

52 Material & labour for applying One coats of white cement based putty on old as well as new plastered surface of Over head tank and installation of GE utility including sand papering the puttied surfaces to form an even and smooth surface complete all as specified and directed. 2363 Square Metre Excess(+) Full Conversion INR

53 Material & labour for preparation of puttied surfaces and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over new or untreated old plastered/ unplastered surfaces of Over head tank and installation of GE utility to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. 1363 Square Metre 0.0000 Excess(+) Full Conversion INR

54 Material & labour for applying two coats of oil bound distemper over a coat of alkali resistant primer over new or untreated old plastered surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. 1000 Square Metre Excess(+) Full Conversion INR

55 Material & labour for applying one coat of weather proof exterior emulsion paint over and including priming coat of exterior primer over new rough plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. 450 Square Metre Excess(+) Full Conversion INR

56 Material & labour for applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over old existing rough plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. 1500 Square Metre Excess(+) Full Conversion INR

56.01 Notes for Periodical services: MOBILISATION OF T&P AND MATERIAL: The Contractor shall complete the following activities within 20 days from the date of commencement of work:(a) Submission of Memorandum of Understanding (MOU) with any of paint manufacturer(b) Obtaining approval of paints & authorized applicator of paints manufacturer from GE(c) Procurement of T&P required for mechanical mode of painting(d) 30% of the quantity of Paints, Primer & Putty required (as per respective manufacturer’s average coverage area) for various items of painting catered in CA COMPENSATION FOR DELAY IN MOBILISATION OF T&P AND MATERIAL BEYOND 30 DAYS: In case of failure on the part of contractor to complete above mobilization within the stipulated period, compensation shall be recovered from the contractor at the rate of Rs. 1,000/- (Rupees one thousand only) per day subject to a maximum of Rs. 1,00,000/- (Rupees one lakh only). Condition 50 of IAFW-2249 (General Conditions of Contracts) shall be deemed amended accordingly. The contractor shall submit original Tax invoices & e-way bills for the entire quantity of materials so procured. The material and T&P collected shall be entered in the MB as “NOT TO BE ABSTRACTED” and shall be duly signed by both the parties. GUARANTEE: Tenderer shall give guarantee 5% money for the work done against item 53.00, 55.00 & 56.00 for 5 years in the shape of FDR in favour of GE(U) Ambala . Excess(+) Full Conversion INR

57 Taking down chowkhats or frame not exceeding 1.5 sqm each with shutter(s) (without taking off shutters from the frame), including removing from site and making good the disturbed surface as per original (except filling of hold fast concrete), complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

58 Taking down chowkhats or frame exceeding 1.5 sqm but not exceeding 4sqm each with shutter(s) (without taking off shutters from the frame), including removing from site and making good the disturbed surface as per original (except filling of hold fast concrete), complete all as specified and directed. 5 Each Excess(+) Full Conversion INR

59 Material & labour for steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (U) Ambala/HQ CWE AMBALA. (ii) Glazing, wire gauge, and guard bars shall be included in quoted rate and not paid separately. (iii) For payment purpose weight of window shall be measured without painting, wire mesh and glazing. 15 Square Metre Excess(+) Full Conversion INR

60 Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra. 50 Running Metre Excess(+) Full Conversion INR

61 Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. 25 Square Metre Excess(+) Full Conversion INR

62 Factory made single extruded WPC (Wood Polymer Composite) solid glazed/wiremesh door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. 23 Square Metre Excess(+) Full Conversion INR

63 Material & labour for Butt hinge medium wt. cold rolled MS, size 100 mm complete all as specified and directed. 36 Each Excess(+) Full Conversion INR

64 Material & labour for MS pressed handle, oval type, stove enameled black, size 150 mm complete all as specified and directed. 24 Each 0.0000 Excess(+) Full Conversion INR

65 Material & labour for 200 mm long MS barrel tower bolt, stove enameled black with bright bolt complete all as specified and directed. 24 Each Excess(+) Full Conversion INR

66 Material & labour for 200 mm long, MS sliding door bolt, clip & bolt type, stove enameled black with bright bolt not less than 12mm dia complete all as specified and directed. 12 Each Excess(+) Full Conversion INR

67 Dismantling wall lining,ceiling board or insulation boards, any thickness, including cover fillets complete all as specified & directed. 304 Square Metre Excess(+) Full Conversion INR

68 Material & labour for Metal false ceiling consisting of 600mmX600mm, 5mm(+ 0.25) thick embossed false ceiling sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x1" (25mmX25mm,1mm thick) in square pattern of grid sizes of 2'X2'(600mmX600mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 4mm MS rods at every 1meter interval of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) Angles etc. Complete as per direction of Engineer-In- Charge, Manufacturer, specification and drawing. 100 Square Metre Excess(+) Full Conversion INR

69 Material & labour for 5 mm light colour PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site on over PVC frame 600mm x 600mm on wall for fixing of paneling /lining inclusive of necessary filling material and PU solvent fixing on wall and including with 35mm U and T cleat to cover joint complete all as specified & directed. 204 Square Metre Excess(+) Full Conversion INR

70 Material & labour for extruded Powder coated aluminium section as in window, ventilator, door and partition wall (powder coated 50 micron in brown/white colour) with movable /sliding, openable or fixed type shutter, frame or any pattern as directed, aluminum section medium weight of series B or size as directed by the Engr in charge cut to size, jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed. Note :– (i) Only aluminum sections measured and paid in this item and thickness of any member should not be more than 2mm. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller, handle, Harrison locks including keys, etc. 150 Kilogram Excess(+) Full Conversion INR

71 Material & labour for sheet glass 4.8 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed. 4 Square Metre Excess(+) Full Conversion INR

72 Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft and loose soil complete all as specified and directed 45 Each Excess(+) Full Conversion INR

73 Material & labour for 11 to 15 mm dia of neck mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut with length of bolt exc 5cm but not exc. 10 cm long complete all as specified and directed 20 Kilogram Excess(+) Full Conversion INR

74 Material & labour for chain link fencing size 100mm x 100mm (3.8mm thick dia wire) including line wires and any type of standards, rails, straining bolts etc., including provision of binding wire fencing incl taking down existing complete all as specified and directed 400 Square Metre Excess(+) Full Conversion INR

75 Note:- Amount of credit of Rs. 118835.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in PDF form which will be deducted offline while acceptance of tender. Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information