Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹76.3 LAccepted-AOC D 89 SHASTRI NAGAR MEERUT UTTAR PRADESH PIN 250004 | MEERUT | UTTAR PRADESH | 250004 | ₹76.3 L Quoted ₹79.3 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹88.8 LRejected-AOC 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | ₹88.8 L | L2 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | MOHAN LAL GUPTA L1 | M/s Anil Kumar L2 |
|---|---|---|---|---|---|
| 1.00 | Dismantling of steel/galvalume sheets of any description (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. | 590 | Sqm | 10 ₹5,900 | 8 ₹4,720 |
| 2.00 | Dismantling timber scantling 40 sqcm and over in section, in any position for framed work complete all as specified and directed. | 1.9 | Cum | 300 ₹570 | 1,000 ₹1,900 |
| 3.00 | Dismantling timber scantling 40 sq cm and over in section, in any position for unframed work complete all as specified and directed. | 2.4 | Cum | 300 ₹720 | 1,000 ₹2,400 |
| 4.00 | Dismantling Mild Steel work of any description as in steel gate, post purlin, etc not otherwise provided for complete all as specified and directed | 5 | Qtl | 400 ₹2,000 | 1,000 ₹5,000 |
| 5.00 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. | 36 | Each | 125 ₹4,500 | 120 ₹4,320 |
| 6.00 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. | 30 | Each | 150 ₹4,500 | 200 ₹6,000 |
| 7.00 | Dismantling wall and ceiling board of any description complete all as specified and directed. | 306 | Sqm | 7.54 ₹2,307.24 | 10 ₹3,060 |
| 8.00 | Demolition of brick work or stone masonary, built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed. | 270 | Cum | 200 ₹54,000 | 600 ₹1.6 L |
| 9.00 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed | 3.6 | Cum | 250 ₹900 | 600 ₹2,160 |
| 10.00 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. | 12.6 | Cum | 250 ₹3,150 | 220 ₹2,772 |
Updated dates
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
17 Nov 2025, 6:00 pmClosed
CWE Dehradun
HQ CWE Dehradun
ADDN/ALTN TO BLDG NO 5, 6, 7, 8, F2 (05 QTRS) (GP C AND D) AT RIMC DEHRADUN
2025_MES_734955_1
0153/DDN(P)/E8
Open Tender
Civil Works
180 days
Dehradun
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
Yes
GE (P)Dehradun
₹1.8 L
Yes
21 Feb 2026
13 Oct 2025
19 Nov 2025
13 Oct 2025
17 Nov 2025
3 Nov 2025
Amount
Dismantling of steel/galvalume sheets of any description (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling timber scantling 40 sqcm and over in section, in any position for framed work complete all as specified and directed.
Dismantling timber scantling 40 sq cm and over in section, in any position for unframed work complete all as specified and directed.
Dismantling Mild Steel work of any description as in steel gate, post purlin, etc not otherwise provided for complete all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.
Dismantling wall and ceiling board of any description complete all as specified and directed.
Demolition of brick work or stone masonary, built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed
Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Dismantling of cast iron/ PVC /AC /SGSW pipes along with fittings and accessories up to 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.
Taking up or down 15 mm steel tubing and connections complete all as specified and directed.
Taking up or down 20 mm steel tubing and connections complete all as specified and directed.
Dismantling of water tanks capacity exc 500 ltrs and n.exc 1000 ltrs including float valve complete all as specified and directed.
Dismantling of water tanks capacity exc 1000 ltrs and n.exc 2000 ltrs including float valve complete all as specified and directed.
Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in any type of soil complete all as specified and directed.
M & L for treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specified and directed.
M & L for treating the back fill in contact with foundation at the rate of 7.50 ltr of emulsion per sqm of vertical surface complete all as specified and directed.
M & L for treating the top surface of filled earth at the rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed.
M & L for treating the soil under plinth protection at the rate of 5 ltr of emulsion per square meter of surface area complete all as specified and directed.
M & L for treating the soil along with external perimeter of building at the rate of 2.25 ltr of emulsion per meter of the perimeter wall complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed.
Removing excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5m above the starting point, soil complete all as specified and directed.
M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed.
M & L for RCC M-25 design mix (using 20mm graded aggregate) for foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc complete all as specified and directed..
M & L for RCC M-25 design mix (using 20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab, chajjas etc and in shelves and this like complete all as specified and directed..
M & L for RCC M-25 design mix (using 20mm graded aggregate) for columns, pillars, piers, post and strut complete all as specified and directed..
M & L for RCC concrete M-25 design mix (using 20mm graded aggregate) for beams, cantilevers, beressummers, lintels over 1.5m span complete all as specified and directed..
M & L for RCC M-25 design mix (using 20mm graded aggregate) for chajjas and the like complete all as specified and directed..
M & L for formwork to sides of concrete , foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work for rough finished surface complete all as specified and directed.
M & L for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surface complete all as specified and directed..
M & L for formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surface complete all as specified and directed..
M & L for formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilever shelves etc. for rough finished surface complete all as specified and directed..
M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. for rough finished surface complete all as specified and directed..
M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings , opening in concrete walls, floors and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm etc. for rough finished surface complete all as specified and directed..
&L for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing, plinth beam, roof beam, lintels, slabs and other similar structures etc., hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per ser item No 36 above but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.
M & L excavated earth for spreading and leveling in layers n exc.25 cm thick and well ramming including watering as required complete all as specified and directed.
M & L for hardcore of broken stone or boulders of gauge n exc. 63 mm , deposited , spread and leveled and compacted in layers n exc. 15 cm thick , watered and rammed to a true surface complete all as specified and directed.
M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.
M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) finished even & smooth with out using extra cement as in plinth protection complete all as specified and directed.
M&L for rendering 10mm thick on other than fair face of brick work surfaces in CM 1:4 complete all as specified and directed.
M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/ tiles complete all as specified and directed.
M&L for glazed coloured ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for non-skid coloured ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for non-skid coloured ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L Glazed ceramic tiles coloured 300mmx 450mm, 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and directed.
M&L 16 to 18 mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/window cill/skirting /platform counter top WHB including cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge.
M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.
M & L for 15mm thick ready mix internal sand faced cement plaster on brick or concrete surfaces including providing as per manufactures specification, surface finished, even & fair complete all as specified and directed
M & L for 15mm thick ready mix external sand faced cement plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufactures specification, surface finished, even & fair complete all as specified and directed
M & L 10mm thick ready mix on concrete ceiling surfaces including dubbing coat after applying one coat of alkaline anticorrosion chemical coating having specific gravity of 1.2 to 1.22 upon exposed reinforcement as per manufactureer instruction etc complete all as specified and directed
M&L for screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 200 ml per bag of cement complete all as specified and directed. Note:- Water proofing liquid shall be measured and paid separately.
M&L for cement concrete 1:2:4 type, B-1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary from work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed
M & L for water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane as per manufacturers instructions with following course :- (a) Applying a priming coat of bituminous primer @ 0.30 kg / sqm, till the surface is properly impregnated. (b) Providing APP based 5 layer polymeric membrane minimum weighing 3.6 kg / sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms /sqm) centre core, laid on primed surface Fixed with hot molten bitumen of grade 85/25 @ 1.2 Kg / Sqm by forced applications as per manufacturers instructions with side over lap of 100 mm and end overlap of 150 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. (c) Apply two coat of bituminous aluminium paint @ 0.20 Kg / Sqm over APP membrane. Note:- 1. The work of water proofing treatment shall be got executed through authorised applicator of the manufacturer only and 10 year company back warranty to be submitted by contractor.
S&F factory made single extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 35mm size thick, pre laminated on both side comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders /rice husk /wheat husk) and non toxic additives (max toxicity index of 12 for 100 gms) having min density of 650 Kg/Cum and screw withdrawal stength of 1800 N (Face) & 900 N (Edge) minimum compressive strenth of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being terminte /borer proof, Water /moisture proof, fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer-in-charge, material test certificate and authentication should be complusory provided by the manufacturing company.
S&F for 30mm thick factory made solid WPC (Wood Plastic Composite) gauged door shutter prelaminated on both side with wiremesh in three number of division with brown wood grain texture including SS wiremesh fixed with ( 15 X5) mm square tubes inside rails with screwing 8 x 28 heat metal zinc coated screws that can be removed or fixed again after changing of wiremesh when needed covered with moulding beading and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS screws. The density of the WPC material shall be as per manufacturer instructions complete all as specified and directed
S & F factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 50 mm Single Rebated ,made from wpc material comprising of virgin PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in position with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge.
S & F factory made steel windows (Box Type) with side hung shutters precoated (colour coated/powder) with double shutter (glazed and gauged shutter both) with frame complete all as specified and directed and shown on Drg TD 158 Sheet ½ & sheet 2/2. Note :- Measurements shall be taken and paid compositely for frame, glazed and gauged. Grill shall be measured and paid separately under respective item. No extra claim shall be entertained on this ground.
S&F for factory made box type powder coated steel ventilator fixed type with glazing bars complete welded including a shop coat of red oxide zinc chrome primer complete all as specified and as directed. (Drg no 158 sheet 1/2 & 2/2) Note: Glass shall be measured and paid separately.
S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specified and directed.
S&F sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.
S&F 4 mm thick Figured glass, pin head type and glazing with oil putty/silicon gel in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc complete all as specified and directed.
S&F stainless steel tower bolt 200 mm long of extruded section etc complete all as specified and as directed
S&F stainless steel sliding door bolts 250mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed
S&F 125 mm long stainless steel handles complete all as specified and as directed
S&F double legged floor door stopper 150 mm long aluminium alloy body with rubber etc complete all as specified and as directed
S&F ball catches with 8 mm dia steel ball and brass body magnet catches for cup board shutter including striking plate as approved etc complete all as specified and as directed
S&F continuous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when open) 30 mm etc complete all as specified and as directed.
S&F mild steel helical door spring 150 mm long ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed
S&F in repairs stainless steel decorative curtain rod of 25 mm bore with/ including brackets 02 Nos, finial 02 Nos) etc complete all as specified and as directed
S & F glossy finished SS 125 mm hasp and staple including bolt to hinge plate and fixed with S S screws complete all as specified and directed.
S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed.
S&F 500 litre rotational moulded triple layer polyethylene water storage tanks three layered white colour (cylindrical vertical with closed top) with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed
S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and directed.
M & L for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing etc and making good cutting not exc 10cm girth complete all as specified and as directed
S&F 15 mm dia bore (including in short length) medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors complete all as specified and as directed
S&F 20 mm dia bore (including in short length) tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed
S&F in repair vitreous chinaware coloured wash hand basin size 550x 400mm complete, CP brass waste coupling 32mm bore,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specified and directed.
S & F Brass CP wall mixer 15 mm bore (wall mounted type) for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed
S & F Brass CP sink mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed .
S & F in repair fancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.
S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.
S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed
S&F Chromium plated brass Single lever hot & cold basin mixer with 450 mm braided connection pipe with out POP up complete all as directed.
S&F in repair tubular towel rail 20mm dia D type brass chromium plated 600mm long between flanges complete all as specified and as directed
S&F in repair PVC connection of 45 cm length including brass nuts complete all as specified and as directed
S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed.
S&F fancy type glass corner 300mm radius of 10mm thick toughened glass with CP railing fixed with fancy type screws complete all as specified and directed. Model: ACN - 1173 of Jaquar, Parryware Model No T6010A1, Cera Model No F505101
S&F in repairs vitreous china wash down water closet pan padestral pattern with spun pipe ‘P’ or ‘S’ trap,white, including PVC seat cover and connection to drain or outgoing pipe and flush pipe , anti syphonize pipe etc fixed complete all as specified and as directed
S&F in repairs vitreous china squatting pan Orissa pattern long pan size 580 mm x 440mm white with spun pipe ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed
S&F in repair PVC low level flushing cistern 10 litres, valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.
S&F Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repair for 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) including cockroach trap with gratings including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed.
S&F for 75 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed.
S&F for 100 mm bore Cast iron spun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed
S&F 75mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing pieces or tapers (larger bore measured) with lead joints complete all as specified and as directed
S&F 100 mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing pieces or tapers (larger bore measured) with lead joints complete all as specified and as directed
S&F 100 mm bore cast iron Tee of (any radius), spun pipe (conforming to IS 3989) diminishing pieces or tapers (larger bore measured) with lead joints complete all as specified and as directed
S&F 75 mm cast iron cowls spun pipe (conforming to IS 3989) complete all as specified and as directed
S&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars etc fixed independently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc complete all as specified and directed.
M&L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed
S&F factory made single extruded WPC (Wood Polymer Composite) solid door frame /showkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium corbonate and natural fibers ( wood powder /rice husk /wheat husk) and non toxic additives (max toxicity index of 12 to 100gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750 kg /cum screw withdrawal stength of 2200 N (face) & 110 N edge, minimum compressive strength of 58 N/mm2, moddus of elasticity 900 N/mm2 and resistance to spread of flame of class 'A' category with property of being termite /borer proof, water /moisture proof & fire retardant & fixed in position with SS dash fasterns /hold fast of required dia and length, colour of door frame to match that of shutter all as specified and directed.
M&L three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed
M&L for applying two coat of acrylic distemper white or any tint over a coat of primer etc over prepared surface of putty complete as specified and directed
M&L for brick work with old size Sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed
Supply only liquid water proofing compound complete all as specified and directed.
M&L for preparation of new wall surface and applying water proof wall putty 1 to 1.5 mm thick (Asian /Berger/JK) in two layer to make the surface smooth complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of 1st quality exterior emulsion weather coat paints over a coat of alkali resistant priming paint complete all as specified and directed.
S & F factory made WPC single extruded 100 % lead free ROHS certified board of 18 mm thick pre laminated moulded shutter for kitchen cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg/cum manufactured by an ISO 9001:2015 certified company. The 18 mm board should be 100 % lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.
S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug/waste pipe washers including cantilever bracket or, connecting unions etc over all size 915 x 460mm with bowel size 410mm x 330mm x 160mm complete all as specified and as directed
S&F kitchen plate rack stainless steel 1 mm thick of size 75cmx60cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and directed
Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' with mouth size 150mm x 150mm setting and jointing to drains with cement mortar 1:1 including embedding in PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.
M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted using old stones obtained from demolition, built in cement mortar (1:6) complete all as specified.
M & L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, throating and necessary form work complete all as specified and directed.
M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses with cement mortar (1:4) complete all as specified and directed
Surface excavation n exc 30 cm deep and averaging 15 cm and getting out in any type of soil complete all as specified.
M&L for exterior grade, coloured glossy finish cement concrete designer chequered tile of size 30cm x 30 cm x 25mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade/colour/matrix of tile as I floor etc over 15mm thick cement screed bed in cewment mortar (1:6) etc complete all as specified and directed.
M&L for brick work with sub class 'B' bricks old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed.
M&L for providing cement concrete coping with plain fair faces incl chamferes, weathering, throating etc type B0, 1:2:4 using 12.5mm graded stone aggregate complete all as specified and directed.
M & L for cement concrete 1:3:6 type C-2 for 150 mm dia in concrete bed to drain pipes including packing under and haunching against the sides of pipes etc complete all as specified and directed.
M & L for reinforced concrete pipes,150mm dia class NP-3, laid and jointed complete with collars complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engineer-In- Charge. (Water proofing compound shall be measure and paid seperatelly).
M&L for 15mm thick rendering on other than fair faces of brick work in CM 1 : 6 finished even and smooth without using extra cement complete all as specified and directed.
Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed.
M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of man hole, drains etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 ( using 20 mm graded stone aggragate) as in surface channel drain including necessary form work complete all as specified and directed.
Desludging/desilting of 150 mm dia sewage lines including manholes, up to 2.0 m depth by removing blockage if any by means of rodding manually or mechanically by pumping out water where required and removing residual silt/mud/peat/sludge out side of defence land complete all as directed by Engr-in-charge. Note: This item of work has to be carried under foul condition, hence the rate to be deemed included. Nothing extra shall be paid to the contractor on this account
M &L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
M&L brick work sub class ‘B’ bricks (except bricks) using old bricks obtained from demolition of brick work, straight or curved on plan exc 6.00 m mean radius built in CM 1:4 complete all as specified and directed.
Extra for forming fair finished drain or channel, 30 cm inner girth in cement concrete using extra cement incl forms, moulds, mitred stopped ends etc complete all as specified and directed
M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick masonry wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade of make Havells/KEI/Finolex/Polycab with concealed medium grade PVC conduit 20 mm dia or higher of make Finolex/Plaza/AKG and conduit fittings with all accessories with suitable size of GI metal modular flush box not less than1.2 mm thick , for mounting of Modular switches, sockets, fan regulator etc,including modular frame and modular white cover plate as top cover, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, up to common earth and connected to earth dolly compete all as specified and directed by Eng.-in-charge of the following. Note: (i) Colour code shall be maintained as per IE rule ie Red for Phase/Live, Black for Neutral, Green for Earth
One light/bell point controlled by one,one way switch.
One ceiling fan/Exhaust fan point controlled by one,one way switch through Regulator.
One three pin 5 Amp socket on same board with other switches.
One three pin 5 Amp socket on independent board
All as per item No.137 above but point wiring (One circuit for one point only) with cable 4.0 Sq mm size, with earth continuity coductor of size 4.0 Sq mm.
S&F Modular switch 1 way 6A,1 Module SP 230 V AC complete all as specified & directed.
S&F Modular switch 1 way 16A,1 Module SP 230 V AC complete all as specified & directed.
S&F Modular Socket, 6A 3 pin, 2 Module 230 V AC complete all as specified & directed.
S&F Modular socket outlet 2 in 1 three pin 6/16 Amp flush type complete all as specified.
S&F Modular Bell switch 6 Amp,1 Module complete all as specified.
S&F ding dong bell AC 230 V single pole complete all as specified and directed .
S&F modular fan step type electronic fan regulator two module 120 Watt complete all as specified and directed .
S&F ceiling rose, 3 terminal PVC/polycarbonate, isolated body 230 V AC complete all as specified and directed .
S&F lamp holder PVC/polycarbonate B22 type, 230 V AC complete all as specified and directed .
M&L for sub main wiring with Two Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade copper conductor multistranded of size 6 Sqmm (nominal area) drawing in and including 25 mm dia or higher PVC conduit medium duty concealed, conduit including accessories and fittings with chasing/ cutting and insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 Sqmm as earth wire upto common earth and connected to earth dolly including taking down old wiring complete all as specified & directed Note :- (i) 03 runs of 6sqmm copper cable and one run of conduit shall be measured 01 RM unit length.
S&F in replacement and Testing TP & N Vertical load line (VTPN) 4 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-54 DB's IK-09 flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties, lugs for cable management including Provn of MCCB 160 Amps as in comer of Make Legrand/Schneider/ABB including connecting terminal strip complete and SP/TP MCBs as out going etc complete pre wired with suitable size copper conductor. The DB's shall hold type test certificate (CPRI) as per IEC 61439-3 complete all as specified and directed by Eng-in-charge including taking out old unserviceable DB and removing from site. (Note :- MCB/ MCCB shall be measured and paid separately and should be same make of as DBs)
S&F in replacement sheet metal enclosures 240 volt with 100 amps rated copper bus bar for double door 8 way DB's with protection IP-43-IK-09 with acrylic Door suitable for one MCB SPN as incoming and 6 MCB SP as out going of Make Legrand /Schneider /ABB for mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge, including taking down old unserviceable DB . (MCBs shall be measured and paid separately and should be same make of as DBs).
S&F MCB double pole 240 Volt 10 KA 40-63 Amp 'B' series complete all as specified & directed .
S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series complete all as specified and directed .
S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed.
S&F LED Batten (4 ft) with aluminum extruded channel (housing) and polycarbonate diffuuser for glare free light with input power 20 Watt , system efficiancy not less than 100lm/watt with built in surge protection not less than 2.0 KV with acessories like both side end cap, driver, holder, screw including LED light with three core flexible sheathed copper conductor cable of suitable size to connect with ceiling rose complete all as specified and directed.
S&F LED light fitting mirror type with aluminum housing and polycarbonate diffuuser 2 feet ,10 watt 220V AC decorative type with acessories like both side end cap, driver, holder,screw including LED light with three core flexiblesheathed copper conductor cable of suitable size to connect with ceiling rose complete all as specified and directed.
S&F decorative, wall mounting, brushed nickel finish fixture with opal glass diffuser suitable with 9 W LED lamp B22 base with and including one No 9 watt LED bulb. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.
S & F in replacement of emergency LED 9 W B22 CDL BULB Cool Day Light complete all as specified and directed.
S&F in replacement of LED Bulkhead Light with aluminum housing and polycarbonate opal diffuuser with input power 10 Watt , IP-65 ,system efficiancy not less than 100lm/watt & built in surge protection not less than 2.0 KV with acessories connecting up with three core flexiblesheathed copper conductor cable of suitable size from ceiling rose complete all as directed.
S&F ceiling fans complete with aluminum blades ,down rods with controlling/connected accessories, 230 V, 1200mm sweep with Air delivery not less than 210 CMM and Five Star Rated with Brushless Direct Current (BLDC) Motor complete all as specified and directed. Note : Rates shall deemed to be included for hanging arrangements and writing MES nos on ceiling fan and taking down, dismantling old fans and deposited to EM store yard.
S&F electric water heater storage type ABS outer body and glass line coated inner tank suitable to withstand 8 bar pressure and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with LED temp Indicator and integrated shock safe plug complete with all accessories such as safety valve, thermostate, NRV, Fixing bolts, stainless steel braided connection piece 450 mm long etc as specified.
S&F exhaust fans complete with blades, frames & louvers etc with steel body AC single phase 230 V of size 300 mm sweep with Air delivery not less than 1710 CMH and speed not less than 1400 RPM with double ball bearing ,100% copper winding motor complete all as specified and directed. Note:(1) Rate for making hole of suitable size deemed to be incuded in this rate.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1400, Copper winding of 250mm sweep complete all as specified and directed. Note:(1) Rate for making hole of suitable size deemed to be incuded in this rate.
M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed.
S&F in replacement Integral LED Street Light Luminaire comprising of high pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 35 watt with efficiency 120 lumen/watt at system level, with average life class 50,000 burning hours including GI brackete made out of 25 mm GI pipe medium grade and MS clamps for fixing of light fitting complete and connected with twin core PVC insulated copper flexible cable with existing point all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core including taking out old unserviceable cable of any size and type complete all as specified and directed.
Excavation in trenches not exc 1.5 m in depth and not exc 1.5 mtr wide including getting out in soft/loose soil complete all as specified and as directed.
Returning filling in including levelling spreading watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed .
Removing of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.
M&L for sand cushioning over and below the U/G cable laid (total depth of sand shall be 23cm punned till 18 cm) complete all as specified and directed. Note : Punned thickness will be considered for measurement
M&L for providing old size sub class 'B' bricks laid perpendicular to the cable abutting each other all as specified and directed.
S&F in replacement 50mm dia GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified and directed.
M& L for boring holes (manually) under road , hard standing without damaging surface for 50 mm dia GI pipe etc complete all as specified and directed.
Taking down old unserviceable GI pipe of any size type and making good disturbed surfaces including accessaries ie gate/ball valves etc. and removing from site complete all as specified and directed.
Supply and laying GI pipe medium grade 40mm dia including fittings laid in trenches or fixed to wall complete all as specified and directed.
Supply and laying GI pipe medium grade 25mm dia including fittings laid in trenches or wall complete all as specified and directed.
S&F gun metal gate valve 40 mm dia with iron wheel head, screwed both ends for GI pipe complete all as specified and directed.
S&F gun metal gate valve 25 mm dia with iron wheel head, screwed both ends for GI pipe complete all as specified and directed.
M & L for cutting of cast iron/GI pipe up to 150 mm bore and reducing to required length before laying in position for insertion of new tees, branch , bends , Y junction, branch complete all as specified and directed.
S & F CI bends (any type, radius and angle ) tapers any type, (straight) , bends, increasing decreasing or double socket etc Tee pieces single branch , Y junction, double branch complete.
M/s Anil Kumar (BID ID -3470679)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.48 MB
BOQ_822974.xls
BOQ • 25.27 MB
0153Tenderdoc.pdf
Tender Documents • 2.46 MB
Download all tender documents and submit your bid