GENERAL Dewatering Station No 10 Rectification Works to Dewatering Station No 10 and Pump House in Sooranadu North Panchayath General Civil Work

Amount

Rectification Work

60.1.1:RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

OD38777/2024-2025:Dismantling of shutter ( uo tp 2 Tonne weight) /Hoisting unit embeded parts etc . of the same and stacking at a distance of 100 m including hire charge of machinery , labour etc complete ( Weight of the unserviceable shutters and embeded parts may be calculated as 60% and unserviceable hoisting units as 80%)

60.2.2:Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

60.2.7:BAILING OUT WATER BY ENGAGING COOLIE - Bailing out water by engaging coolie where ever necessary where pumping with engine and pump set not possible

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

OD38310/2024-2025:Dismantling and erecting the covers of all mechanism in correct position as directed by the departmental officers including cost of all material, labours etc complete

OD38311/2024-2025:Providing base and nut arrangement for hoisting the shutter including cost of all materials ,labour etc complete

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

OD38397/2024-2025:Rectification and levelling 63mm dia damaged MS spindle and replacing with line and level including lathe work etc., complete as per direction of departmental officers at site

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD38406/2024-2025:Shutter for dams- Supplying and providing Anjili wood shutter planks 7.5 cm thick including cost of materials and labour charges etc complete

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

60.7.4:DR PACKING FOR APRONS - Rough stone dry packing for apron with good quality blasted rubble including packing to compactness to lines levels, cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

OD38482/2024-2025:Fixing of MS flat in correct position with bolt and nut after drilling holes to the flat and wooden scantling , canal gates ,all labour and machinery and incidental and concyance charges etc complete

OD38487/2024-2025:Engaging Man Coolies for removing timber logs ,Plastic wastes and other debris form the channel etc complete as per the direction of departmental officers at site

OD38505/2024-2025:Supply of MS flats confirming to IS 2062 GrB including cost of conveyance charge

OD38506/2024-2025:Supplying MS bolt with nut and washer, bolts and nuts up to 300 mm in length

13.65.1:Painting with black anti- corrosive bitumastic paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD38853/2024-2025:Supply of MS plates 450 x450 x25 mm thick confirming to IS 2062 GrB including cost of conveyance charge

OD38927/2024-2025:Fixing of MS Plates in correct position with bolt and nut after drilling holes to the flat and wooden scantling , canal gates ,all labour and machinery and incidental and concyance charges etc complete

60.3:Supplying and fixing structural steel channel ISMC 75X40mm for holding shutter planks including cutting ,hoisting fixing in position with material and labour charges etc complete

ANIL V VARGHESE (BID ID -2185253)

Bidder Name

ANIL V VARGHESE

SREEKESHKUMAR