GENERAL-Vellilakkad Chunange VCB-Construction of VCB at Vellilakkad Chunange in Tirurangadi Municipality,Tirurangadi LAC in Malappuram district-General Mechanical Work

Amount

Supply of materials, fabrication,painting and erection of MS shutter.

OD27671/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD27672/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD27673/2022-2023:Supply of MS round bar including cost of conveyance charges

OD27674/2022-2023:Fabrication and errection of Embedded parts for canal shutters ( lJp to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl fficer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

OD27675/2022-2023:Fabrication,Supply,Erection and Assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track,seal track,Seal seat etc as per approved specifications,drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing,welding,shearing,grinding etc,lead and lift,conveyance,incidental and handling etc complete

OD27676/2022-2023:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.103:Supply of MS checquered plates including cost of conveyance charges

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD27677/2022-2023:Cost of painting with 2 coats of aluminium paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site.

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

OD27790/2022-2023:Providing of worm and pinion having a lifting speed of around 5.00 cm/min for rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

OD27679/2022-2023:Providing EN-8 Screw Rod 7.50 Tonne Capacity 4.00 Mtr lift Screw Rod having one number of EN-8 Screw Shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material, labour, hire charges and conveyance. (63mm Dia Screw rod )

OD27680/2022-2023:SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

OD27681/2022-2023:Erection of the Canal Shutter ( Up to 2 Tonne weight ) / Hoisting Bridge / Platform including hand rails , lader etc. for the same including . alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied..

OD27682/2022-2023:Providing screw rod locking arrangement to the shutters including cost of materials ,fixing charges etc complete

OD27683/2022-2023:SUPPLYING and STACKING of PAD LOCK.

SAI ENGINEERING

Bidder Name

Ashique Fabricators

SAI ENGINEERING