Badoli Badi MVS water supply scheme Phase-II

Amount

Supply of all material, labour, T&P etc. all complete for Construction of RCC Cross Wall 90cm high at source for the protection of source from flood storm, Repairing of existing BFG, Repairing of Existing Roughning filter & Repairing of Existing CWR as per design, drawing or instructed by site engineer.

Excavation in ordinary soil mixed with shingle, boulder requiring special T&P like pickaxe, crowbar etc. for foundation including lift upto 1.5 m. and Lead upto 30 m. Including refilling, watering, ramming of excavated earth into the trenches or space between the sides of foundation trenches or in to the plinth and removal and disposal of surplus earth upto a distance of 60 m. from trenches in all kinds of soil.

Same as item no.1.01 but in Ordinary rock

R.R. stone masonry in 1:4 cement and local sand in foundation & plinth indlucing supply of all materials, labour, T&P etc. required for proper completion of work.

Filling pebbles or stone 25 mm to 50 mm size in gallery for water interception including making 5.00 x 1.00 x 1.00 volume as internal chamber around perforated pipe (in Reverse Slope 1:10)

30 cm dry stone pitching with large stones

150 mm dia GI medium class perforated pipe 2 Nos., having 10 mm dia holes 25 mm apart laying at gradient 1:50

100 mm dia GI both end flanged pipe with blind flange and nut bolts for Bye-pass arrangement during construction of cross wall

50 mm dia GI medium class pipe with plug for washout

Dewatering of water including cartage of pumps, oil lubricants, labour etc. complete for gadhera diversion works.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering and shuttering finishing and reinforcement -all work up to plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 grad aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached plasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, post and struts etc up to floor five level excluding the cost of centering and shuttering finishing and reinforcement -all work up to plinth level in 1:1.5:3 (1 cement : 1.5 coarse sand : 3 grad aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, banding, placing in position and binding all complete reinforcement for RCC work using thermo mechanically treated bars.

Centering & shuttering including strutting, roping etc. and removal of form work for walls (any thickness) including attached pilasters, buttresses, plinth and string coarse etc.

Supply and fixing washout as per required size of min length 2.0 mtr length and min size of 25 mm dia GI (med) pipe to be provide as per direction of Engineer-in-charge.

20mm thick PC plaster in proportion of 1:2 with cement and sand, including racking of joints up to a depth of 1.27cm including supply of all materials, labour, T&P etc required for proper completion of work.

MH cover with locking arrangement 450 mm x 450 mm

Supply & filling of Filter media in roughning filter as per drawing or instruction by engineer at site.

6mm to 15mm

16mm to 25mm

26mm to 40mm

Painting Black Japan paiint two coats over one primer coat on MS work i.e. MH frame & cover

Supply of all materials, labour and T & P etc. and construction of Double intake Chamber with Drain including Filter media as per type design and drawing.

Providing of all materials, carting from site store to site of work, laying & jointing of G.I.(M) screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc.) in trenches with its cutting, threading and testing of pipe line etc complete.

15mm dia

20mm dia

25mm dia

32mm dia

40mm dia

50mm dia

Dismantling & Relaying of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50 m but excluding the cost of earth work.

15mm dia

20mm dia

25mm dia

Excavation of earth for pipe line in following strata lift upto 1.5m. Lead upto 30m. Including refilling,watering,ramming of excavated earth into the trenches and removal of surplus earth upto adistance of 60m. Fromtrenches including supply of labour,T&P.etc complete.

Soil mixed with boulder and bajri

Soft rock

20 mm dia

32 mm dia

50 mm dia

C.I. Air Valve (Screwed) 15mm dia

Construction stone masonry Wheel Valve / Air valve chamber 60x60x60 cm, inside in 1:4 cement & sand mortar with MS MH cover on top the chamber with proper locking arrangement.

Supply and installation of Bucket type Chlorinator of 25L Capacity.

Supply & Fixing an Iron Board and Printing on it as well as writing the details of Work on it.

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of ferrule including tapping the main, but excluding the cost of earth work and cost of all materials.

Providing and fixing brass ferrule 15mm dia. nominal bore for domestic connections.

Providing and fixing of Brass bib cock of approved quality

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces two coats & letter writing as instructed by site-in-charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position cement concrete of specified grade in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD specifications.

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specification.

M/s Harendra Mohan

bharat singh negi